You searched for: Electrophoresis Systems

Supplier: HOEFER ELECTROPHORESIS

The SE600 is ideal for all standard electrophoresis separations.

Supplier: Cytiva

Front side waste tray, PP, For: Electrophoresis Systems

Supplier: EMBITEC

The ultra compact RunOne™ electrophoresis system is able to run a whole variety of gel sizes from mini to long in less than 350 ml of buffer. The power supply with selectable 25, 50 or 100 V output slides directly into the running unit. The system can run eight to 108 samples in minutes, with the separate casting system allowing up to six gels to be cast and run at the same time.

Supplier: EMBITEC

Electrophoresis system+ MultiCaster, Multiple horizontal gel electrophoresis, RunOne™, + MultiCaster, EP-2159, 117×119 mm, Turquoise

Supplier: MICROSOLV

Creates a perfect detection window. Removes the polyimide coating from 365 µm OD capillaries for detection by UV and LIF.

Supplier: EDVOTEK

Designed for separation of proteins on polyacrylamide gels, the MV10 unit holds one 9×19 cm gel cassette and can accommodate most pre-cast or self-made gels.

Supplier: HOEFER ELECTROPHORESIS

The HE33 mini horizontal electrophoresis unit is designed for very fast separations of DNA restriction fragments in agarose gels.

Supplier: Cytiva

The key to outstanding, reproducible electrophoresis results is temperature control. Gels unequally cooled on their two faces produce slanted bands appearing as broad or double bands in stained gels. SE 600 Ruby™ ensures uniform heat in gels because, firstly, the gels are completely immersed in the lower buffer for uniform heat transfer and, secondly, a standard magnetic stirrer circulates buffer around the vertically suspended heat exchanger to maintain homogeneous lower buffer temperature. The ergonomically designed SE 600 Ruby™ provides two built-in side handles, which facilitates carrying and handling.

Supplier: Cytiva

The simple, modular design of miniVE vertical electrophoresis system consolidates all the small parts for electrophoresis and blotting into one convenient unit. Uniform gel temperature is maintained with the tank-style lower buffer chamber. A full tank stabilises the temperature so that lanes are straight and bands are flat. The blot module will accept two gel/membrane stacks simultaneously. The lower buffer chamber is designed to hold two blot modules, allowing four gels to be blotted at once.

Supplier: EKSIGENT

he dsDNA 1000 Kit is designed for use on the PA 800 Plus and contains the supplies necessary to perform a high-performance separation and analysis of double-stranded DNA (dsDNA) fragments.

Supplier: EDVOTEK

In this experiment kit, students will explore four unique experiments that utilise agarose gel electrophoresis to separate DNA samples. The DNA banding patterns will be analysed within scenarios that examine forensic, medical, and scientific investigations.

Supplier: EDVOTEK

Our best-selling M12 Complete™ just got even better. The M12 Ultra™ includes the M12 Complete™ electrophoresis package and the all-new TruBlu™ Jr. Blue light transilluminator. This dynamic duo enables real-time visualisation of SYBR® Safe or other blue light-reactive dye agarose gels.

Supplier: EMBITEC

RunOne™ well visualisation plates are designed to make gel loading simple. The light colour of most gel units provides little or no contrast for the agarose gel and the gel wells. RunOne™ well visualisation plates are red, fit securely into the RunOne™ system, and provide a stable platform for gel running.

Supplier: EDVOTEK

This LabStation provides all that is needed to run any Edvotek DNA or dye electrophoresis kits with students.

Supplier: Cytiva

Ettan™ IPGphor™ 3 is a fully integrated isoelectric focusing (IEF) system optimised to deliver high throughput, speed, reproducibility, and high protein-loading capacity. Ettan™ IPGphor™ 3 is optimised for easy handling of CyDye™ labelled proteins and other light-sensitive samples, and provides temperature control critical for reproducibility in 2-D DIGE experiments.

Supplier: EDVOTEK

Capable of running one or two groups of student samples at the same time and producing excellent results in 30 to 40 minutes.

Supplier: Cytiva

HE 99X Maxi submarine unit offers a variety of gel lengths and comb sizes so that the gel can be run exactly based on the need.

Supplier: EDVOTEK

Six groups of students can load their own individual gels and the six gels can be run together in 30 to 40 minutes. No need for gel taping and gels can be poured quickly and easily using the gel tray sealing rubber end caps.

Supplier: Genscript

GenBox Gel electrophoresis system is designed to run 1 or 2 mini gels at the same time. GenBox mini tank is designed for ultimate convenience and consistent performance compared to traditional electrophoresis tanks. Discover the versatile and easy to use GenBox mini tank for your gel electrophoresis and blotting needs.

Supplier: Agilent

Capillary electrophoresis system (CE), accessory, Spare part, Capillary tubing cutter

Supplier: Agilent

Alignment interfaces are an integral part of the Agilent diode-array detection (DAD) system. These interfaces contain optical slits which are precisely matched to the capillary inner diameter for optimised sensitivity and linear detection range.

Supplier: Agilent

CE/MS sprayer kit and CE/MS adapter kit to couple an Agilent CE instrument with an MS system.

Supplier: Agilent

Universal Bare Fused-Silica Capillaries have a window, 750 mm effective length and 363 μm Ext.Ø, fitting into any CE instrument.

Supplier: Alpha Laboratories

A large selection of combs are available for all of our Clarit-E electrophoresis gel tanks. Selecting the right comb or combination of combs enables you to tailor the system to your precise requirements.

Supplier: Agilent

PVA coated capillaries contain a permanently adsorbed layer of polyvinyl alcohol. This coating minimises hydrophobic and electrostatic solute/wall interactions and eliminates electroosmotic flow (EOF). Using a proprietary deposition process, the PVA coating is stable over a wide pHrange, even under basic conditions from 2,5 to 9,5. This stability allows the use of many common CE buffers. Because the silica surface is covered, many proteins and amines can be analysed without the peak tailing found with uncoated capillaries. In addition, since EOF is eliminated, cumbersome washing procedures are unnecessary and migration time reproducibility may be improved.

Supplier: Agilent

µSIL-WAX capillaries with windows, featuring a modified, polyethylene oxide, hydrophilic coating.

Supplier: Agilent

CEP coated capillaries contain a permanently bonded polymer coating. This CEP coating shields the silanol functionality of the capillary surface and helps prevent sample adsorption. Additionally, EOF is nearly eliminated, making the capillary ideal for applications such as DNA separations with sieving polymer buffers.

Supplier: Agilent

Pre-aligned fused-silica capillaries from Agilent Technologies are designed and optimised for ease of use and reliability. All capillary ends are cut to a smooth, mirror-like finish. In addition, the polyimide outer coating is removed from the ends. These processes ensure minimal sample adsorption and help maintain sharp peak shapes. All capillaries have a pre-made detection 'window' and a built-in alignment stopper that allows rapid and precise insertion in the alignment interface.

Supplier: Agilent

These fused silica capillaries are designed to analyte mixtures are separated and the components detected via UV-Vis absorption, allowing preliminary identification based on peak elution time and UV-Vis spectra or both, when compared to a standard.

Supplier: Agilent

Capillary electrochromatography is a hybrid of CE and LC and can be performed in the Agilent CE system. Using CE capillaries packed with LC stationary phases, CEC offers the loadability and selectivity of LC and the high efficiency of CE.