You searched for: Vials

Supplier: Restek

Crimp top snap seal vial with white graduated marking spot.

Supplier: Restek

Screw thread vials made of plastic with 100 µl inserts.

Supplier: NEOLAB

Due to their technical geometry, the neochrom® threaded vials with ND9 can be used on all popular autosamplers.

Supplier: Restek

Screw thread vial with big mouth step vial system has a larger inner diameter than conventional vials and incorporates a neck finish that is uniquely designed to allow the insert to be precisely aligned in the center of the vial. This precise alignment provides maximum sample withdrawal and eliminates any chance of missed injections.

Supplier: DWK Life Sciences

Insert is made of durable polypropylene (PP) and is designed for vials with a step.

Supplier: THERMO NATIONAL SCIENTIFIC

These storage vials provide constant pH for duration of sample storage life and are available in the capacity ranges of 2 to 40 ml. Manufactured in Type 1, Class A, 33 expansion borosilicate glass or 51A amber glass.

Supplier: THERMO NATIONAL SCIENTIFIC

Glass vials are precrimped with an aluminium seal and PTFE/red rubber septum.

Supplier: THERMO NATIONAL SCIENTIFIC

These crimp/snap top low volume sample vials can be used with 6, 7 and 8 mm autosampler trays. They are made of borosilicate glass, type 1, class A.

Supplier: THERMO NATIONAL SCIENTIFIC

Chromatography vial, Fire-polished neck, 1,00 ml, PP, Clear, Ø×H: 8×40 mm, Non sterile, Cap included: Yes, Cap size: 8 mm, Cap material: PE

Supplier: THERMO NATIONAL SCIENTIFIC

These headspace vials are manufactured to provide uniform glass thickness which insures even heat distribution for consistent sampling reliability. Use Tin plate seals with magnetic pick autosamplers. Pressure release seals are designed to open when internal pressures exceed 3,0 ±0,5 bar, protecting equipment during analysis of highly volatile samples.

Supplier: PerkinElmer

Manufactured from Type I borosilicate glass, which meets all USP, JP, and EP Pharmacopeia requirements. These vials are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments.

Supplier: THERMO NATIONAL SCIENTIFIC

Vials feature a 40% larger opening than standard opening vials to reduce needle damage. They are manufactured from superior quality 33 expansion borosilicate clear glass Type 1 and fit most autosamplers that accommodate the 12×32 mm vial format.

Supplier: NEUBERT VOLUME GLASSWAERE

Crimp vial made of quartz glass.

Supplier: Restek

Convenience kits with black PP open-hole caps and 8 mm red PTFE/silicone septa.

Supplier: DELTALAB

Tubes and caps made of autoclavable PP. Designed for the storage of biological material at temperatures as low as –196 °C (only in the gas state if stored in liquid nitrogen).

Supplier: WATERS

Vial insert, 0,30 ml, Glass, Conical bottom, Non sterile, Cap included: No

Supplier: WATERS

Chromatography vial, Screw neck, external thread, 2,00 ml, Glass, Clear, Ø×H: 12×32 mm, Non sterile, Cap included: Yes

Supplier: WATERS

Vial insert, 0,15 ml, Glass, Ø×H: 8×40 mm, Non sterile, Cap included: No

Supplier: SARSTEDT

These scintillation vials with screw cap are made from HDPE.

Supplier: SARSTEDT

Sample vials for Coulter Counter with enclosed caps. Vials are made from PS, caps from LDPE.

Supplier: SARSTEDT

These sample vials are made from HDPE.

Supplier: THERMO NATIONAL SCIENTIFIC

These sample storage unassembled convenience kits save time during sample preparation.

Supplier: WATERS

General use vial, Snap neck, 1,00 ml, Borosilicate glass, Clear, Ø×H: 8×40 mm, Non sterile, Cap included: Yes

Supplier: BIOZYM

These cryogenic vials made from PP are used for optimum storage of a variety of biological materials such as cell cultures, sera and blood components.