You searched for: Sterilisation Indicators

Supplier: S▄DPACK MEDICA

Tapes indicators by dry heat sterilisation.

Supplier: MELAG Medizintechnik OHG

MELAcontrol Pro with 40 indicator strips is a durable, usable test body for the power-user.

Supplier: DELTALAB

Sterilisation indicator tapes for steam autoclave.

Supplier: S▄DPACK MEDICA

The indicator turns a different colour depending on the time and temperature of sterilisation:

Supplier: 3M MEDICAL

These chemical integrators are Class 5 integrating indicators used for pack control as a method for monitoring sterilisation process conditions inside each pack. They can also be used inside a process challenge device (PCD) to release processed items, excluding implants (load control), however they do not replace the use of biological indicators.

Supplier: Synergy Health

Crepe paper coated with a dry natural rubber based adhesive for steam sterilisation.

Supplier: CROSSTEX

Self-adhesive, non toxic, chemical process indicators change from blue to pink upon exposure to 10 minutes of saturated steam at 121 °C or 2 minutes at 134 °C. Longer exposure will result in a brighter shade of pink. The blue to pink colour transition is sensitive to time, temperature, and the presence of saturated steam.

Supplier: S▄DPACK MEDICA

Steam sterilisation. The labels change colour from pink to dark brown after sterilisation.

Supplier: CROSSTEX

Self-adhesive, non-toxic, chemical process indicators that change from yellow to red upon exposure to gamma or electron beam radiation. Labels are coated with a UV blocking agent for protection from exposure to UV light. A minimum of 15 kGy irradiation is recommended for sufficient end-point colour development. At greater dosage levels, the radiation indicators exhibit a darker shade of red.

Supplier: S▄DPACK MEDICA

The discs are available in a variety of blank or printed versions.

Supplier: S▄DPACK MEDICA

The discs are available in a variety of blank or printed versions.

Supplier: CROSSTEX

Spore suspensions are pure suspensions of viable spores from specific organisms of known resistance to various sterilisation processes. These biological indicators are used to validate that bacterial spores have been completely destroyed. The indicator is simply processed with the load in the steriliser. No bacterial growth after culturing indicates that the sterilisation process is effective. Growth indicates ineffective sterilisation.

Supplier: CROSSTEX

Chemical process indicators provide a fast and consistent visual check on items that were sterilised by EO.

Supplier: CROSSTEX

Biological sterilisation indicators are used to perform sterilisation cycle validation. They are created by inoculating spore suspensions of certified population and resistance onto paper strips.

Supplier: CROSSTEX

Self-contained biological indicators (SCBIs) for monitoring steam sterilisation consist of a durable PC vial with cap, a crushable glass ampoule with Trypticase® soy broth (TSB) modified with pH indicator, and a disc inoculated with Geobacillus stearothermophilus spores.

Supplier: CROSSTEX

CPI-DP1 are intended for use with individual units (e.g. packs, containers) to indicate that the unit has been directly exposed to a high temperature dry heat or depyrogentation process and to distinguish between processed and unprocessed units.

Supplier: CROSSTEX

Sterilisation indicator, Spore Suspension, Sterilisation: Steam, Bacillus atrophaeus, cell line 9372: spore suspension (24 month shelf life), population 10^8/0,1 ml - steam sterilisation process

Supplier: CROSSTEX

Spore threads are prepared from Geobacillus stearothermophilus. These are designed to be placed directly into a device and utilised to monitor steam sterilisation process efficacy.

Supplier: 3M MEDICAL

The Electronic Test System (ETS) is a stand alone test device for measurements of the physical parameters of a steam sterilisation cycle providing an accurate temperature, pressure and time measurement.

Supplier: CROSSTEX

Sterilisation indicator, Spore Strips, Sterilisation: Steam, Geobacillus stearothermophilus cell line 7953: mini strip 10⁶ (24 month shelf life) / sterilisation process: steam, Length: 10 mm, Width: 2 mm

Supplier: 3M MEDICAL

Internal pack monitor for use with Vaporised Hydrogen Peroxide/Gas Plasma sterilisation processes.

Supplier: 3M MEDICAL

This auto-reader for steam, 390, is designed to incubate and automatically read the biological indicators for steam at 60 °C for a final fluorescent result.

Supplier: CROSSTEX

Bacillus subtilis strips for monitoring low temperature steam sterilisation processes.

Supplier: CROSSTEX

Biological sterilisation discs are used to perform sterilisation cycle validation in small areas of a device, where a standard-sized spore strip will not fit, such as within a syringe barrel, inside tubing, or under a cap. Spore discs are created by inoculating spore suspensions of certified population and resistance onto paper discs.

Supplier: CROSSTEX

Spore coupons for use in monitoring plasma/vapourised hydrogen peroxide (VH₂O₂) sterilisation processes.

Supplier: CROSSTEX

Inoculated carrier mini spore discs for monitoring EO and dry heat processes.

Supplier: CROSSTEX

These spore ampoules are ideal for use in validation and routine monitoring of liquid steam sterilization cycles. Spore ampoules are manufactured using hermetically sealed Type I borosilicate glass containing an exclusively formulated Tryptic
Soy Broth (TSB) modified with pH indicator, and Geobacillus stearothermophilus spores. No activation is required; simply expose Spore Ampoules to sterilization process and incubate.

Supplier: 3M MEDICAL

Auto-reader for use with 3M™ Attest™ Rapid Readout Biological Indicators and process challenge packs for steam. Includes ethernet cable for web app connectivity.

Supplier: CROSSTEX

Spore discs are used to monitor the plasma/vaporised hydrogen peroxide sterilisation processes. Place the spore discs either directly into the chamber or positioned in areas of a device which are the most difficult to sterilise or distributed throughout rooms and isolators.

Supplier: SPS

These adhesive tapes are adapted for all types of sterilisation.