You searched for: Closures
Whether protecting the sample from outside contamination or the workplace from the bottled toxic waste, closures guarantee tight and reliable seals. With a vast cap selection for best compatibility with any container, tailoring to specific contents is possible. Temperature resistant models allow any procedure to be completed safely. Available in different finishes, any sensitive chromatography sample is protected. The caps are easy to close with one hand and come in many colors to assist with identification.
Aluminium seals, lined, WHEATON®
Supplier: DWK Life Sciences
Open top seal provides for filling or retrieving contents with a syringe, large target diameter.
Expand 7 Items
VWR® ND13, Screw Cap PP with Central Hole, 8,5 mm and Septa
Supplier: LA PHA PACK
VWR®, Chromatography vial closure, PP, Ø: 13 mm, Type: PP black, Hardness: 55° shore A, Septum: Silicone beige/PTFE red, Thickness: 1,5 mm
Expand 1 Items
Closed top caps for storage vials
Supplier: THERMO NATIONAL SCIENTIFIC
PTFE on film/foam backing offers broad chemical resistance.
Expand 1 Items
Spray pump for alcoholic disinfectants
Supplier: SCHUELKE MAYR
Spray pump for 500 and 1000 ml bottles.
Expand 1 Items
Plugs for test tubes
Supplier: BOETTGER PAUL
Polyethylene (PE). Ribbed plugs with two sealing ribs, very tight sealing.
Expand 9 Items
Screw caps for screw neck vials
Supplier: DELTALAB
These screw caps are made of autoclavable PP.
Expand 3 Items
Aluminium crimp seals for headspace vials
Supplier: THERMO NATIONAL SCIENTIFIC
Pre-assembled caps and septa are convenient and minimise contamination from handling.
Expand 1 Items
VWR®, Magnetic Screw Caps, ND18 and Septum, ND18
Supplier: LA PHA PACK
VWR®, Chromatography vial closure, Silicone/PTFE, Ø: 18 mm, Type: Silver, central hole 8 mm, Hardness: 45° shore A, Septum: Silicone blue transparent/PTFE white, Thickness: 1,3 mm
Expand 1 Items
Polyethylene Caps for Tubes
Supplier: DELTALAB
Caps madeup of polyethylene.
Expand 1 Items
La-Pha-Pack® Snap Ring Cap
Supplier: LA PHA PACK
Snap ring cap soft version (transparent) with septa red rubber/PTFE (red/beige), 1,0 mm.
Expand 1 Items
Screw caps, 13-425
Supplier: THERMO NATIONAL SCIENTIFIC
These PP caps are chemically inert and suitable for most chromatography applications.
Expand 3 Items
Aluminium crimp caps
Supplier: THERMO NATIONAL SCIENTIFIC
Pre-assembled caps and septa are convenient and minimise contamination from handling.
Expand 3 Items
KIMBLE® Black Phenolic, Screw Thread Caps
Supplier: DWK Life Sciences
Black phenolic cap has a securely mounted LDPE cone-shaped liner which offers a two part seal. The closure forms a seal around the rim and the polyseal cone forms a seal against the inner diameter of the vial opening.
Expand 1 Items
Screw caps for transport container
Supplier: BOETTGER PAUL
Screw caps, HDPE, Colour: Natural
Expand 5 Items
Poly Crimp Cap
Supplier: NEUBERT VOLUME GLASSWAERE
Poly crimp cap with inserted septum.
Expand 1 Items
Snap caps for BOD bottles
Supplier: Hach
Snap over caps, for standard BOD bottles
Expand 1 Items
Push-on lids for jars
Supplier: RIXIUS
Push-on cap, Plug lid, For: Sample bottles, PE, Colour: Natural, PE, For: Thread DIN 80
Expand 2 Items
Seal for Screw Cap
Supplier: NEUBERT VOLUME GLASSWAERE
Silicone with PTFE coating.
Expand 1 Items
Caps for solvent safety bottles, Q-Series
Supplier: OMNIFIT
Outer PP cap with PTFE inner body.
Expand 6 Items
Connection Cap, GL 25
Supplier: NEUBERT VOLUME GLASSWAERE
Connection caps with hole made of celanex, without seal.
Expand 1 Items
Screw caps for bottles
Supplier: Rosa Heinz GmbH
Screw cap, ribbed, with PE-insert, Colour: Black, PP
Expand 1 Items
Caps for bottles and jars
Supplier: MURRAY S
Screw caps for bottles and jars, aluminium, with rubber liner, Thread: R3/24
Expand 13 Items
Pouring rings for laboratory bottles
Supplier: Lenz Laborglas GmbH & CO.KG
Pouring rings, made of polypropylene.
Expand 2 Items
Screw cap for reagent bottles
Supplier: SciLabware
Phenolic cap with PTFE faced sealing disc
Expand 18 Items
Screw caps for laboratory bottles
Supplier: SciLabware
Screw cap, made of PP, for media-lab bottles
Expand 7 Items
Caps for solvent safety bottles, T-Series
Supplier: OMNIFIT
Outer PP cap, inner PTFE body.
Expand 7 Items
Supplier: VWR Collection
Supplier: Integra
Supplier: VWR Chemicals
Supplier: VWR Collection
Supplier: Integra
Supplier: SCIENTIFIC INDUSTRIES ELMIS
Supplier: VWR Collection
Supplier: VWR Collection
Supplier: Industrial Physics
Supplier: VWR Collection
Supplier: VWR Collection
Supplier: VWR Collection
Supplier: EPPENDORF
Supplier: Integra
Supplier: GETT GERATETECHNIK
Supplier: HENKE SASS WOLF