You searched for: Injectiespuiten voor chromatografie
In liquid chromatography, the syringe functions primarily as a pipette or liquid-transfer device that loads a sample loop. The same largely holds true for gas chromatography. The syringe generally does not take an active role in injection, which occurs only after the sample has been displaced from the syringe. These syringes are designed for the highest performance in applications such as liquid or gas chromatography and the handling of corrosive gases and liquids, radioactive materials, and sterile solutions. Syringes are gas-tight and leak-proof.
VWR®, HPLC Microspuiten, Rheodyne
Supplier: VWR Collection
De vaste naald van uitmuntende kwaliteit, met speciaal gepolijste, stompe naaldpunt, specifieke lengte en diameter, zorgt voor een volledige afdichting en voorkomt beschadigingen aan naaldafdichtingen en rotor.
Expand 2 Items
Draagbare automatische analytische spuit, eVol® XR
Supplier: Trajan Scientific and Medical
eVol® combineert twee precisieapparaten in één systeem: een digitaal gecontroleerde elektronische besturing en een door XCHANGE® ondersteunde analytische spuit. Het resultaat is een digitaal gecontroleerd doseersysteem, gebaseerd op positieve verplaatsing, dat kan worden geprogrammeerd om zeer gevarieerde vloeistofbewerkingsprocedures uit te voeren op een reproduceerbare en accurate manier.
Expand 18 Items
Headspace/soil gas syringes
Supplier: Trajan Scientific and Medical
The gas tight syringes are fitted with a valve (SVLL) and a special Luer probe with a side hole for efficient sample intake.
Expand 3 Items
XCHANGE® syringes
Supplier: Trajan Scientific and Medical
The XCHANGE® coupling system secures and locks the syringe in place. This is achieved by a coupling mechanical piece that captures the syringe and a magnet that automatically aligns – eliminating the need for springs, screws or alignment gauges. Once engaged the syringe is locked into position requiring zero holding force.
Expand 14 Items
VWR®, Gasdichte microliterspuiten
Supplier: VWR Collection
Micro syringes without needle
General purpose Luer lock connector for use with autosamplers and liquid handling instruments. All parts in contact with sample are made from neutral borosilicate glass and PTFE. This provides excellent performance and an inert sample environment.
Expand 9 Items
VWR®, Microspuiten Ultra-minute Volume
Supplier: VWR Collection
Microspuit met vaste naald voor zeer gevoelige GC-analyse en ultra-minuutvolumes.
Expand 2 Items
VWR®, Microspuiten voor GC Autosampler Agilent 7673A
Supplier: VWR Collection
Super flexibele plunjer.
Expand 3 Items
VWR®, Standaard Microspuiten
Supplier: VWR Collection
Standaard microspuiten voor GC met vaste naald.
Expand 4 Items
Spuiten voor automatische monsternemer
Supplier: Trajan Scientific and Medical
Voor HP7673, 7683, 7693A en 6850ALS.
Expand 33 Items
Gasdichte spuiten 1 tot 100 ml
Supplier: Trajan Scientific and Medical
Vervaardigd van borosilicaatglas, PTFE-zuigeruiteinden en Kel-F® of PTFE-luertip waar nodig.
Expand 23 Items
Microvolumespuiten 25 tot 500 µl
Supplier: Trajan Scientific and Medical
Injectiespuit, chromatografie, HPLC, 250F, Volume: 250 µl, Tip type: Afgeschuind, Meter: 25, Lengte: 50 mm, Ø uitw.: 0,5 mm, VPE: 1
Expand 14 Items
Syringes, Cavro
Supplier: Trajan Scientific and Medical
These cavro syringes are a type of instrument syringes used in chromatography.
Expand 1 Items
Diamond MS syringes
Supplier: Trajan Scientific and Medical
Diamond MS syringes are designed to improve the sensitivity of your MS analysis.
Expand 17 Items
Syringes for HPLC autosamplers, Waters instruments
Supplier: Trajan Scientific and Medical
Injectiespuit, chromatografie, HPLC, With PTFE-tipped plunger, 1/4-28 UNF front thread, 250D-WISP, Volume: 250 µl, Voor: Waters instruments, VPE: 1
Expand 2 Items
Spuiten voor CTC analytische systemen
Supplier: Trajan Scientific and Medical
* Gasdicht.
Expand 46 Items
Micro extraction by packed sorbent (MEPS™)
Supplier: Trajan Scientific and Medical
Micro Extraction by Packed Sorbent (MEPS™) is a new development in the field of sample preparation by SPE (solid phase extraction). The MEPS™ product consists of two parts, the MEPS™ syringe and the MEPS™ Barrel Insert and Needle assembly (BIN). The MEPS™ approach to sample preparation is suitable for reversed phases, normal phases, mixed mode and ion exchange chemistries. Because MEPS™ BINs can be used for sample volumes as small as 10 µl it makes them particularly well suited to on-line use with LC-MS analysis of volume limited samples.
Expand 7 Items
Spuiten met zuiger in naald, 0,5 tot 5 µl
Supplier: Trajan Scientific and Medical
Guaranteed liquid and gas tight to 3,5 bar. The plunger extends into the needle tip. Ideal for dispensing very small liquid volumes.
Expand 23 Items
High pressure syringes
Supplier: Trajan Scientific and Medical
These high pressure syringes are designed for high pressure gas sampling.
Expand 2 Items
On-column syringes
Supplier: Trajan Scientific and Medical
On-column syringes are suitable for general purpose applications.
Expand 2 Items
Syringes for HPLC autosamplers, Hitachi instruments
Supplier: Trajan Scientific and Medical
Injectiespuit, chromatografie, HPLC, Gas-tight, with M10 - 1,0 screw thread termination, 500C-HITACHI, Volume: 500 µl, Voor: L7200/7250, AS1000/2000/4000 LC, VPE: 1
Expand 1 Items
Microliterspuiten 5 µl
Supplier: Trajan Scientific and Medical
These are plunger-in-barrel syringes. Each plunger is individually fitted for each microsyringe for perfect sealing.
Expand 7 Items
Dispenser and pump syringes
Supplier: Trajan Scientific and Medical
These dispenser and pump syringes incorporated with Diamond technology have been designed and manufactured for a variety of instruments and customer applications.
Expand 13 Items
Microlab 600 Bubble Free Prime (BFP) syringes
Supplier: HAMILTON BONADUZ
The Bubble Free Prime (BFP) syringe is specifically designed for the Microlab® 600 series and the only syringe type compatible with the instrument. It has a conical plunger tip that extends through the threaded termination and into the valve. This unique design expels the air from the syringe and valve decreasing the number of priming cycles required.
Expand 15 Items
Microliterspuiten 10 µl
Supplier: Trajan Scientific and Medical
These 10 µl metal plunger syringes with stainless steel needle are ideal for making microvolume injections of 1,5 to 8 µl. Each plunger is individually fitted for each microsyringe for perfect sealing.
Expand 18 Items
Gasdichte spuiten 10 tot 500 µl
Supplier: Trajan Scientific and Medical
Constructed from borosilicate glass, PTFE plunger tips and Kel-F® or PTFE Luer cones where applicable.
Expand 39 Items
L-MARK® LC Autosampler Syringes
Supplier: Trajan Scientific and Medical
The comprehensive range of L-MARK® Gold and L-MARK syringes for LC systems are designed and tested to meet critical instrument parameters.
Expand 80 Items
Syringes for HPLC autosamplers, Thermo Scientific instruments
Supplier: Trajan Scientific and Medical
Injectiespuit, chromatografie, HPLC, Gas-tight, with PTFE-tipped plunger, 1/4-28 UNF front thread, 250C-THERMOSPEC, Volume: 250 µl, Voor: AS100/300 and AS1000/3000/3500 LC autosamplers, VPE: 1
Expand 1 Items
Jumbo syringes
Supplier: Trajan Scientific and Medical
These syringes are ideal for calibration of medical equipment such as respirators and spirometers, and for stack and air sampling.
Expand 3 Items
Syringes for HPLC autosamplers, PerkinElmer instruments
Supplier: Trajan Scientific and Medical
These syringes are made from borosilicate glass. They are used as replacement for C and CX syringes.
Expand 6 Items
Supplier: Integra
Supplier: VWR Collection
Supplier: Integra
Supplier: VWR Chemicals
Supplier: VWR Collection
Supplier: Integra
Supplier: SCIENTIFIC INDUSTRIES ELMIS
Supplier: VWR Collection
Supplier: VWR Collection
Supplier: Industrial Physics
Supplier: VWR Collection
Supplier: VWR Collection
Supplier: VWR Collection
Supplier: EPPENDORF
Supplier: GETT GERATETECHNIK
Supplier: HENKE SASS WOLF