You searched for: Filter Holders

Supplier: VWR Collection

Glass filter holder with 47 mm stainless steel screen, 300 ml glass funnel, 47 mm aluminium spring clamp, 47 mm glass base, PTFE gasket and silicone stopper no. 8.

Supplier: Merck

Filter holders to vacuum filter small volumes of liquids for precise particulate contamination analysis.

Supplier: Sartorius

These vacuum filter holders feature a glass cylinder, PP base and sealing plug with anodised aluminum closing cap.

Supplier: Sartorius

This syringe filter holder is made from PTFE. It is well suited for particle removal from samples and reagents for analytical methods, such as NMR samples as it is unaffected by chemicals and contains no trace elements which could be released into the liquid being filtered.

Supplier: Merck

Ultraclean liquids or gases in line by pressure filtration. Simply open the housing to change the filter without disturbing the attached plumbing.

Supplier: Sartorius

Filter holders made from PC for filtration of aqueous solutions, ideal for use with peristaltic pumps or syringes.

Supplier: Merck

These filter holders are used to ultraclean or sterilise small volumes of liquids dispensed by syringes.

Supplier: Cytiva (Formerly Pall Lab)

Lightweight filter holders for particulate and stack sampling.

Supplier: Merck

Stainless steel filter holders used to vacuum filter liquids for bacteriological or particulate contamination analysis.

Supplier: Merck

Epifluorescence filter holder with stainless steel funnel and base, anodised aluminum spring clamp and silicone stopper.

Supplier: Cytiva (Formerly Pall Lab)

Disc filter holders recommended for filtration of products such as aggressive chemicals, laboratory solvents, cell culture media, ophthalmic, pharmaceuticals, vitamins, process water, antibiotics and photo-resists (gases and liquids).

Supplier: Sartorius

Stainless steel closed filter holder for microbiological, analytical sampling and testing of gas in pressurised lines.

Supplier: Merck

These filter holders are ideal for ultra-cleaning or sterilising batch volumes of liquids.

Supplier: Cytiva (Formerly Pall Lab)

The 13 mm Swinney filter holders are economical for small volume (1 to 10 ml) filtration.

Supplier: Merck

Standing filter holders with anodised aluminium legs for contamination analysis.

Supplier: Merck

Aseptic system and holder for 47 mm disc filters. Used for general filtration applications and filtration of samples for particulate or biological contamination analysis.

Supplier: Merck

Stainless steel in-line filter holders for filtering liquids or gases through 25 mm or 47 mm disc filters at pressures up to 700 bar.

Supplier: Merck

Vacuum-filter air or other gases from open atmospheres or from closed systems for particulate contamination analysis.

Supplier: Merck

Patch Test Kit is a complete solution for field-based collection and analysis of hydrocarbon-based hydraulic fluids, bulk chemicals, boiler water, and lubricating oils.

Supplier: Sartorius

Individual stainless steel filter holders, stand-alone, to be assembled on vacuum flasks or on manifolds, depending on the particular version.

Supplier: Cytiva (Formerly Pall Lab)

Simplifies clean-up and degassing of mobile phase solvents and other solutions. The versatile design fits most HPLC bottles, flasks, and containers, and eliminates the added steps of washing flasks and transferring mobile phase solvent from flask to reservoir.

Supplier: Merck

This filter holder is suitable for particulate and biological contamination analysis via vacuum filtration.

Supplier: Cytiva (Formerly Pall Lab)

Filter holder designed for particulate filtration of small volumes (10 to 100 ml) using a syringe as final filter in gas filtration systems.

Supplier: Sartorius

For colony counting and particle collection, specially designed for applications in which the particles or microorganisms retained on the membrane filter surface are of interest. The stainless steel frit filter support ensures a uniform distribution of the residues.

Supplier: Sartorius

The filter holder has been designed for in-line filtration.

Supplier: Sartorius

Filter holder, PTFE, 200 ml, For Ø: 47 mm

Supplier: Whatman products (Cytiva)

Polysulfone filter holder for sampling and flow filtration, ideal for filtration with peristaltic pumps and for gas sterilisation.

Supplier: Whatman products (Cytiva)

These syringe filter holders are made from stainless steel. The holders with Luer lock fittings connected to a standard syringe offer quick and easy clarification, sterilisation and removal of particulates from small volume samples, typically for HPLC applications.

Supplier: Sartorius

Allows the separation of coarse solids from samples with bacteriological germ detection in a single operation, before and during the actual germ-retaining filtration step.

Supplier: Trajan Scientific and Medical

A connecting unit with inlet and outlet connectors for the gas lines.