U hebt gezocht naar: pH Electrodes

Supplier: Mettler - Toledo

Pressurized gel-electrolyte electrodes for pH/ORP measurements in chemical processes.

Supplier: Mettler - Toledo

Reference electrode with break-proof plastic shaft and S7 connector.

Supplier: CONSORT

Electrode, pH, SP21X, pH: 0 - 14, 0...+100 °C, Glass, Diaphr.: Single junction, Electrolyte: Refillable, Ø×L: 12×110 mm, S7, For: General purposes

Supplier: Lovibond

Combined pH/temperature electrode with temperature sensor NTC 30 kOhm and BNC connection.

Supplier: Mettler - Toledo

405-DPAS is a pre-pressurized, gel-filled, low maintenance pH electrode, specially developped for in-line measurements in biotech and food & beverage applications. It is designed for use in reactors, tanks, open basins and transfer lines under harsh chemical process conditions.

Supplier: Mettler - Toledo

The InPro 3100 is a combined pH probe and temperature sensor designed specially for in-line pH measurements in bio-processes where CIP and SIP are used.

Supplier: Cole-Parmer

Electrode, pH, Combination pH electrode, bulb, pH: 1 - 14, 0...+80 °C, Glass, Diaphr.: Annular ceramic, Electrolyte: 4.0M KCl/AgCl (refillable), Ø×L: 12×350 mm, BNC, 1 m cable, For: Measurements in large flasks

Supplier: Mettler - Toledo

HA405-DXK is a pressure-resistant, low-maintenance pH-electrode for a variety of tough chemical applications.

Supplier: CONSORT

Electrode, pH, SP21B, single junction, refillable, pH: 0 - 14, 0...+100 °C, Glass, Ø×L: 12×110 mm, BNC, 1 m cable, For: Laboratory use, research, production, education, agriculture

Supplier: Mettler - Toledo

These low-maintenance pH electrodes are supplied complete with factory-filled, prepressurised liquid electrolyte and suited to a wide scope of applications in the biotechnology and pharmaceutical industries. The electrodes have been designed for use at medium operating pressures and in particular where reliable and highly accurate measurements are of special importance.

Supplier: WTW ONLINE

The SensoLyt® measuring chains with arming are easy to install and boast flexible measuring and application areas. Eletrodes without arming can be connected directly to a pH monitor of the EcoLine® or QuadroLine® series. Depending on the application, they can be installed into a flow vessel.

Supplier: Cole-Parmer

These electrodes with epoxy body are ideal for the measurement of food extracts.

Supplier: Mettler - Toledo

Pressure-resistant, low maintenance electrodes with built-in temperature sensor for universal use in industrial wastewater processes.

Supplier: Mettler - Toledo

HA405-DPA is a pre-pressurised, gel-filled, low maintenance pH-electrode, specially developped for in-line measuremernts in chemical and water applications.

Supplier: Mettler - Toledo

405-DPAS is a pre-pressurized, gel-filled, low maintenance pH probe, specially developped for in-line measurements in biotech and food and beverage applications.

Supplier: Mettler - Toledo

High performance pH and ORP measurement.

Supplier: CONSORT

Electrode, pH, SP23Y, pH: 0 - 14, +5...+110 °C, Glass, Diaphr.: Double junction, Electrolyte: Sealed, Ø×L: 12×110 mm, S8, For: Alkaline solutions, high temperature fluids, photo baths, ink

Supplier: WTW ONLINE

The special design of the process line electrodes makes them close to optimal in their accuracy, stability, speed and longevity to liquid electrolyte electrodes. For the use in pipelines, they can be installed into the replacement fitting CHEMtrac 830 M.

Supplier: Mettler - Toledo

The low-maintenance pH probe InPro 3250 series with factory-filled, pre-pressurized liquid electrolyte are suited to an extensive range of applications in the biotechnology, pharmaceutical and chemical process industries.