You searched for: Electrodes

Supplier: Cole-Parmer

These electrodes with epoxy body are ideal for the measurement of food extracts.

Supplier: CHEMPUR

This design consists of of a slit gauze cylinder containing a concentrically positioned wire spiral.

Supplier: Cole-Parmer

Electrode, pH, Combination pH electrode, bulb, pH: 1 - 14, 0...+80 °C, Glass, Diaphr.: Annular ceramic, Electrolyte: 4.0M KCl/AgCl (refillable), Ø×L: 12×350 mm, BNC, 1 m cable, For: Measurements in large flasks

Supplier: Mettler - Toledo

Electrode, Redox/KF, EM43-BNC, pH: -, 0...+100 °C, Glass, Diaphr.: -, Electrolyte: -, BNC, fix cable, For: KF and redox titrations of food ingredients

Supplier: Mettler - Toledo

HA405-DXK is a pressure-resistant, low-maintenance pH-electrode for a variety of tough chemical applications.

Supplier: Mettler - Toledo

The InPro3030 is a state-of-the-art, gel-filled, low-maintenance pH electrode specifically developed for inline pH measurements in bioprocesses.

Supplier: WTW ONLINE

The special design of the process line electrodes makes them close to optimal in their accuracy, stability, speed and longevity to liquid electrolyte electrodes. For the use in pipelines, they can be installed into the replacement fitting CHEMtrac 830 M.

Supplier: CONSORT

Electrode, pH, SP21X, pH: 0 - 14, 0...+100 °C, Glass, Diaphr.: Single junction, Electrolyte: Refillable, Ø×L: 12×110 mm, S7, For: General purposes

Supplier: Mettler - Toledo

Pressure-resistant, low maintenance electrodes with built-in temperature sensor for universal use in industrial wastewater processes.

Supplier: Mettler - Toledo

The polarographic sensor InPro6850i is an intelligent all-rounder that uses the new 3-electrode system. A separate platinum anode increases the signal stability especially in low oxygen levels.

Supplier: Mettler - Toledo

The InPro 3100 is a combined pH probe and temperature sensor designed specially for in-line pH measurements in bio-processes where CIP and SIP are used.

Supplier: Mettler - Toledo

These low-maintenance pH electrodes are supplied complete with factory-filled, prepressurised liquid electrolyte and suited to a wide scope of applications in the biotechnology and pharmaceutical industries. The electrodes have been designed for use at medium operating pressures and in particular where reliable and highly accurate measurements are of special importance.

Supplier: Mettler - Toledo

HA405-DPA is a pre-pressurised, gel-filled, low maintenance pH-electrode, specially developped for in-line measuremernts in chemical and water applications.

Supplier: RADIOMETER CLINICAL PRODUCTS

The Ca electrode (E733) is an ionselective electrode whose sensing element is a PVC membrane containing a calcium-neutral ion carrier. The ionsensitive membrane is covered with a cellophane membrane in order to protect it from the samples.

Supplier: Endress+Hauser

Compact panel device for all industries.

Supplier: Endress+Hauser

Compact panel device for all industries.

Supplier: Mettler - Toledo

Pressurized gel-electrolyte electrodes for pH/ORP measurements in chemical processes.

Supplier: Endress+Hauser

Compact panel transmitter for a pH/ORP, conductivity or dissolved oxygen measuring point.

Supplier: CONSORT

A range of conductivity electrodes for different applications.

Supplier: Mettler - Toledo

405-DPAS is a pre-pressurized, gel-filled, low maintenance pH electrode, specially developped for in-line measurements in biotech and food & beverage applications. It is designed for use in reactors, tanks, open basins and transfer lines under harsh chemical process conditions.

Supplier: WTW ONLINE

The SensoLyt® measuring chains with arming are easy to install and boast flexible measuring and application areas. Eletrodes without arming can be connected directly to a pH monitor of the EcoLine® or QuadroLine® series. Depending on the application, they can be installed into a flow vessel.

Supplier: CONSORT

Electrode, pH, SP23Y, pH: 0 - 14, +5...+110 °C, Glass, Diaphr.: Double junction, Electrolyte: Sealed, Ø×L: 12×110 mm, S8, For: Alkaline solutions, high temperature fluids, photo baths, ink

Supplier: Endress+Hauser

Digital all-round ORP sensor with low maintenance requirements and long service life.

Supplier: Hach

The innovative technology of Hach’s inductive conductivity sensors eliminates polarization and electrode coating problems in harsh environments. The sensor comes complete with standard sensor cable length of 6 m, digital gateway, and a 1 m digital extension cable.

Supplier: WTW ONLINE

With the NitraLyt® Plus 700 IQ, nitrate can be determined directly in the medium. This makes measured values available in a timely manner and they can easily be used for regulation purposes.

Supplier: CONSORT

General purpose conductivity electrode for measuring low and medium coductivities.

Supplier: Mettler - Toledo

405-DPAS is a pre-pressurized, gel-filled, low maintenance pH probe, specially developped for in-line measurements in biotech and food and beverage applications.

Supplier: Hach

Immersion or flow-through probe with optical luminescence measuring method. The luminescence method means the measurement is unaffected by any type of interference. The sensor features PROGNOSYS which is a predictive diagnostic system that allows users to be proactive in their maintenance, by alerting them to upcoming instrument issues.

Supplier: CONSORT

Electrode, pH, SP21B, single junction, refillable, pH: 0 - 14, 0...+100 °C, Glass, Ø×L: 12×110 mm, BNC, 1 m cable, For: Laboratory use, research, production, education, agriculture

Supplier: Mettler - Toledo

The low-maintenance pH probe InPro 3250 series with factory-filled, pre-pressurized liquid electrolyte are suited to an extensive range of applications in the biotechnology, pharmaceutical and chemical process industries.