You searched for: Organic Standards

Supplier: Restek

Contains 16 components, those are alachlor, atrazine, bromacil, cyanazine , endrin, endrin aldehyde, endrin ketone, γ-bhc, heptachlor, heptachlor epoxide, hexachlorobenzene, hexachlorocyclopentadiene, methoxychlor, metolachlor, simazine and trifluralin.

Supplier: Restek

The test for ethylene oxide is specified in many individual drug monographs of USP24/NF19. The limit test concentration is currently 10 ppm. While the specific test solution and method will vary depending on the particular drug monograph, the solution below is suitable for most tests.

Supplier: Restek

The mix consists of 4-chloro-3-methylphenol, 2-chlorophenol, 2,4-dichlorophenol, 2,4-dimethylphenol, 4,6-dinitro-2-methylphenol, 2,4-dinitrophenol, 2-methylphenol, 4-methylphenol, 2-nitrophenol, 4-nitrophenol, pentachlorophenol, phenol, 2,4,5-trichlorophenol, 2,4,6-trichlorophenol.

Supplier: Restek

Mix Contains: Carbon disulphide (75-15-0); Chloroacetonitrile (107-14-2); 1-Chlorobutane (Butyl chloride) (109-69-3); trans-1,4-Dichloro-2-butene (110-57-6); 1,1-Dichloro-2-propanone (513-88-2); Diethyl ether (ethyl ether) (60-29-7); Hexachloroethane (67-72-1); Iodomethane (methyl iodide) (74-88-4); Methacrylonitrile (126-98-7); Methyl tert-butyl ether (MTBE) (1634-04-4); 2-Nitropropane (79-46-9); Propionitrile (107-12-0).

Supplier: Restek

The european pharmacopoeia/ICH Class 2 mix B, revised consists of 10 components, they are acetonitrile (410 μg/ml), chloroform (60 μg/ml), 1,2-dimethoxyethane (100 μg/ml), N,N-dimethylacetamide (1,090 μg/ml), 1,4-dioxane (380 μg/ml), 2-hexanone (50 μg/ml), methanol (3,000 μg/ml), nitromethane (50 μg/ml), pyridine (200 μg/ml) and tetralin (100 μg/ml).

Supplier: Restek

Mix contains Acifluorfen methyl ester, Bentazon methyl ester, Chloramben methyl ester, Dalapon methyl ester, 2,4-D methyl ester, 2,4-DB methyl ester, DCPA methyl ester (Chlorthal-dimethyl), Dicamba methyl ester, 3,5-Dichlorobenzoic acid methyl ester, Dichlorprop methyl ester, Dinoseb methyl ether, Pentachloroanisole, Picloram methyl ester, Quinclorac methyl ester, 2,4,5-T methyl ester, 2,4,5-TP.

Supplier: Restek

Contains 1 ml each of these mixtures: 524 calibration mix #7A, 524 calibration mix #7B. calibration mix #7A contains Acetone (67-64-1), 2-Butanone (MEK) (78-93-3), 2-Hexanone (591-78-6), 4-Methyl-2-pentanone (MIBK) (108-10-1), Tetrahydrofuran (109-99-9); calibration mix #7B contains Acrylonitrile (107-13-1)
Allyl chloride (3-chloropropene) (107-05-1), Ethyl methacrylate (97-63-2), Methyl acrylate (96-33-3), Methyl methacrylate (80-62-6), Nitrobenzene (98-95-3), Pentachloroethane (76-01-7).

Supplier: Restek

Contains 19 components, those are 2-chlorobiphenyl , 2,3-dichlorobiphenyl , 2,2',5-trichlorobiphenyl , 2,4',5-trichlorobiphenyl, 2,2',3,5'-tetrachlorobiphenyl, 2,2',5,5'-tetrachlorobiphenyl, 2,3',4,4'-tetrachlorobiphenyl, 2,2',3,4,5'-pentachlorobiphenyl, 2,2',4,5,5'-pentachlorobiphenyl, 2,3,3',4',6-pentachlorobiphenyl, 2,2',3,4,4',5'-hexachlorobiphenyl, 2,2',3,4,5,5'-hexachlorobiphenyl, 2,2',3,5,5',6-hexachlorobiphenyl, 2,2',4,4',5,5'-hexachlorobiphenyl, 2,2',3,3',4,4',5-heptachlorobiphenyl, 2,2',3,4,4',5,5'-heptachlorobiphenyl, 2,2',3,4,4',5',6-heptachlorobiphenyl, 2,2',3,4',5,5',6-heptachlorobiphenyl and 2,2',3,3',4,4',5,5',6-nonachlorobiphenyl.

Supplier: Restek

The european pharmacopoeia/ICH Class 2 mix A consists of 13 components they are, chlorobenzene (360 μg/ml), cyclohexane (3,880 μg/ml), cis-1,2-dichloroethene (1,870 μg/ml), dichloromethane (600 μg/ml), n,n-dimethylformamide (880 μg/ml), ethylbenzene (369 μg/ml), n-hexane (290 μg/ml), methylcyclohexane (1180 μg/ml), toluene (890 μg/ml), 1,1,2-trichloroethene (80 μg/ml), m-xylene (1,302 μg/ml), o-xylene (195 μg/ml) and p-xylene (304 μg/ml).

Supplier: Restek

ASTM D6042-96 test method is for the determination of phenolic antioxidants and erucamide slip additives in polypropylene homopolymer formulations using liquid chromatography - is a 'consensus' or 'referee' method used among plastic manufacturers and the pharmaceutical companies that purchase plastic containers. Plastic container manufacturers use this test to ensure the quality of their product for their pharmaceutical customers.

Supplier: MARKET SOURCE PART PROCESS

Organic Standard, Perfluorodecanoic acid 50 µg/ml in methanol, Pack type: Glass bottle

Supplier: MARKET SOURCE PART PROCESS

Organic Standard, Sodium heptadecafluorooctane-1-sulphonate 50 µg/ml in methanol

Supplier: Merck

Organic Standard, 2-Methyl-1-butanol, ≥98,0% (GC)