7792 Results for: "p-Toluenesulphonic+acid+monohydrate&view=easy"

Supplier: Portwest

Be seen and be comfortable in this excellent quality jacket. The unique lightweight material offers an unrivaled combination of breathability, waterproof, and windproof protection.

Supplier: Portwest

This jacket is constructed from 98% polyester and 2% anti-static carbon fibre. The fabric has flame-resistant and anti-static properties and is therefore used for wide range of products suitable for all climates and end uses.

Supplier: Thermo Orion

These bench top meters are ideal for a wide range of applications and advanced dissolved oxygen analysis in the lab.

Supplier: MOLNLYCKE HEALTH CARE

These sterile, blue cleanroom undergloves with beaded cuffs and curved fingers are made to be worn in combination with the Biogel® PI Tech overglove to form a Breach Indication System. The gloves are suitable for use in aseptic and Class 100 (ISO 5)/EU GMP Grade A environments.

Supplier: Portwest

These waterproof trousers are ideal for wet conditions where extra warmth is required. Elasticated FR braces keep the trouser in place when bending and stretching while the raised back provides extra warmth and protection.

Supplier: EPPENDORF

Mix samples completely and reliably with the Eppendorf® MixMate. 96 and 384-well plates and reaction tubes are mixed by the 2DMix-Control technology even at the microliter scale. The additional vortex function has a 2 s run timer allowing processing your next sample without restarting.

Supplier: Portwest

The DX4 baffle jacket incorporates an ergonomic body-mapped design to balance insulation and comfort. Padded Insulatex panels help keep the core body area warm, while the knitted sleeves provide unrestricted stretch and movement. Two zipped side entry chest pockets and internal pockets offer plenty of secure storage space.

Supplier: Thermo Fisher Scientific

Pierce™ MS(PEG)_n reagents are methyl-terminated, polyethylene glycol compounds (n equals 4 to 24 PEG units) and TMS(PEG)₁₂ is a three-branched, polyethylene glycol compound (3× 12 PEG units). Both are activated as NHS esters for covalent pegylation of primary amines on proteins (eg. lysines) or assay surfaces.

Supplier: HUBER

Unichillers offer better efficiency, stable pressure and delivery performance with a constant cooling water temperature compared to traditional tap water cooling. Chillers also reduce water consumption and help conserve the environment whilst lowering operating costs.

Supplier: DuPont

Air-fed coverall with attached non-dissipative under gloves and over boot assembly, consisting of integrated dissipative inner boots attached to dissipative outer boots.

Supplier: Liebherr

Freezers with a spark-free interior specifically for storing explosive and highly flammable substances in laboratories and in the chemical industry.

Supplier: Merck

Most individuals infected with Salmonella develop diarrhea, fever, and abdominal cramps 12 to 72 H after infection. The illness usually lasts 4 to 7 days, and the majority of patients recover without treatment. However, in some cases, the diarrhea may be so severe that hospitalisation is required. Salmonella is a genus of rod-shaped, Gram-negative, non spore-forming, predominantly motile bacteria, belonging to the Enterobacteriaceae family. Salmonella spp. are one of the most common causes of food poisoning worldwide and have been isolated from most types of raw food (e.g. meats, eggs and plant products). Their high resistance to drying combined with a very high heat resistance once dried makes Salmonella a potential problem in most foods, particularly in dry and semi-dry products. Food legislation in many countries includes limits on Salmonella – typically absence in 25 g of food. Traditional microbiological methods for detection of Salmonella in food and animal feed require a total of up to five days to obtain a simple yes/no result. Innovative, rapid tests make screening for pathogenic organisms easier. The one-step format reduces the possibility of errors during handling.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: Sartorius

Compact Arium® Mini laboratory water systems have been designed for Type 1 ultrapure water requirements of 10 L per day and are ideal for use in preparation of buffers, media and samples, both in life sciences applications and in analytical laboratory procedures.

Supplier: Merck

The EZ-FIT^® filtration unit is a single-use filtration device made of white, gridded, and mixed cellulose esters (MCE) membrane with a blue base integrating a cellulose support pad. It provides a safe and fast way of performing membrane filtration by avoiding the exposure to the risks of microbiological analysis.

Supplier: Corning

The Axygen® MaxyGene II is an ideal multi-purpose thermal cycler for the basic research laboratory. The MaxyGene II Thermal Cycler is simple to program, compact in design and built to perform.

Supplier: Hach

This advanced laboratory meter is ideal for testing critical water quality parameters. The meter connects with smart probes (IntelliCAL™) that automatically recognise the testing parameter, calibration history, and method settings to minimise errors and setup time. The instrument is designed to withstand years of continuous lab use.

Supplier: FRISTADS KANSAS

Winter parka made of breathable, wind and waterproof GORE-TEX®-material. With polyester lining inside and fully padded.

Supplier: DELTALAB

HDPE container and white ribbed cap.

Supplier: Ahlstrom-Munksjö

Ahlstrom-Munksjö manufactures a series of extremely high purity, acid washed filter papers designed for use in analytical and gravimetric analysis. The quantitative grades are manufactured from top quality cotton linters using ultra-pure, deionised water and are further treated with dilute acid to remove any remaining organic and inorganic impurities. All quantitative grades are manufactured in a strictly controlled environment that ensures high uniformity and high purity from filter to filter.

Supplier: VACUUBRAND

These chemistry pumping units use chemical resistant solenoid valves to maintain process control. Once the first boiling point is detected by the controller, it maintains the pressure at this level. Pumping units can be configured to run one or two independent processes at the same time.

Supplier: IKA

Regardless of whether samples are hard, soft or fibrous this MultiDrive crusher can perform a wide range of crushing tasks involving coarse and fine crushing. MultiDrive control mixes, grinds and is also fitted with a dispersion vessel and a disposable tube.

Supplier: GA

The DYMO® LabelWriter™ 550 Printing kit provides an affordable, complete printing solution for labs on a budget. Supplied with the DYMO LabelWriter™ 550 direct thermal printer, free DYMO Connect label design/barcoding software, and two rolls of LWCS-class labels.

Supplier: Portwest

A superb flame-resistant and anti-static garment, offering breathable and waterproof protection.

Supplier: EUTECH

These rugged and user-friendly testers feature a simultaneous display of pH and temperature and provide accurate measurements for water analysis. Available in a standard version or with a spear tip open pore sensor for direct measurements of solid or semi-solid samples such as cheese, meat, fruit, bread and more.

Supplier: EPPENDORF

Eppendorf Deepwell plates 96-well, 1000 µl offer efficient sample handling with features like OptiTrack® matrix for rapid identification and g-Safe® technology for stability during centrifugation. SafeCode variants provide secure three-level coding, including error correction for reliable identification, ensuring flexibility and accuracy in experimental workflows.

Supplier: Integra

The VACUBOY hand operator is ideal for aspirating and suctioning liquids from cuvettes, microtitration plates, test tubes, Petri dishes, cell culture bottles, roller bottles, bioreactors and other typical laboratory vessels in a safe and controlled way. It is designed to be used with many different stainless steel aspiration adapters, Pasteur and serological pipettes and pipette tips for an enormous range of applications. Each adapter has been specially designed to match the dimensions and the geometry of the corresponding glass or plastic laboratory vessels. The hand operator can be connected to any vacuum source already in the laboratory, thus serving to improve the existing facilities.

Supplier: Industrial Physics

The Automatic Film Applicator Standard provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors.

Supplier: EPPENDORF

Eppendorf Deepwell plates 384-well, 200 µl offer efficient sample handling with features like OptiTrack® matrix for rapid identification and g-Safe® technology for stability during centrifugation. SafeCode variants provide secure three-level coding, including error correction for reliable identification, ensuring flexibility and accuracy in experimental workflows.

Supplier: Thermo Orion

Measure dissolved oxygen as percent saturation, concentration in mg/L or concentration in ppm simultaneously with temperature using the Orion™ Lab Star DO113 DO bench meter.