9343 Results for: "VARIAN"

Supplier: VARIAN

CP-Sil 5/C₁₈ CB for PCB has a lower polarity than 100% polydimethylsiloxane due to its C₁₈ substitutions. Due to the absence of cyano groups it provides high signal-to-noise ratios for ECD detectors.

Supplier: VARIAN

CP-Wax 57 CB for Glycols and Alcohols is guaranteed for the analysis of glycols, diols and alcohols. It has a unique, high polarity wax phase that produces symmetrical peaks.

Supplier: VARIAN

Pump tubing, PU, Clear, Tubing int.Ø: 1,59 mm, Tubing ext.Ø: 3,18 mm, Wall thickness: 0,80 mm, Length: 25 ft

Supplier: VARIAN

CP-TCEP column is able to separate benzene after n-dodecane. In addition, the excellent separation power provides the necessary resolution for complex mixtures such as gasoline.

Supplier: VARIAN

These columns are specially designed for the determination of trace levels of pesticide residue.

Supplier: VARIAN

Select Biodiesel columns address the key challenge of good column lifetime when operating at very high temperatures up to 400 °C.

Supplier: VARIAN

CP-Sil 5 CB for Formaldehyde is optimized for the analysis of formaldehyde, water and methanol, and can deliver trace analysis of sulfur compounds and partial permanent gases.

Supplier: VARIAN

Female luer adapter to ¹/₁₆" fittings

Supplier: VARIAN

ICP-OES supplies and accessories help you maintain the superior performance of your ICP-OES System.

Supplier: VARIAN

Using these mixed columns you can eliminate mismatched column sets and spurious peaks for more reliable results. Every column contains a mixture of individual pore size materials, accurately blended to cover a specified broad range of molecular weight with a linear calibration to eliminate column mismatch. Simply add extra columns for even greater resolution.

Supplier: VARIAN

SepTech™ media has been developed specifically for prep to process HPLC. The high level of batch-to-batch reproducibility and particle integrity give consistent performance and ease of column packing, which are essential for minimising production downtime.

Supplier: VARIAN

Clean PP reservoirs contain two PP frits pre-inserted, an ideal configuration for simple filtration.

Supplier: VARIAN

Bond Elut diol (2OH) resembles unbonded silica in its tendency for strong hydrogen bonding with analytes, but can also be employed in the non-polar mode.

Supplier: VARIAN

Column type: HPLC column, Pre-weighted calibration kit, EasiVial PEG/PEO

Supplier: VARIAN

PL-Rink resin, 1% DVB, 0,3 mmol/g, 75 - 150 μm, 100 g

Supplier: VARIAN

PL-HCO₃ MP resin, 1,8 mmol/g, 100 Å, 150 - 300 μm, 1 kg

Supplier: VARIAN

The microbore columns are ideal for use with detectors requiring low flow rates such as some mass
spectrometers and with capillary LC systems. Easily accommodates high temperatures for better selectivity and resolution between impurities and the target oligo.

Supplier: VARIAN

PL-FMPB resin, 1% DVB, 1,4 mmol/g, 150 - 300 μm, 1 kg

Supplier: VARIAN

Agilent offers a range of tuning and performance standards for LC/MS.

Supplier: VARIAN

Syringes made of plastic.

Supplier: VARIAN

OmniSpher™ is an ultra-high bonded silica designed for the analysis of mixtures containing either acidic or basic functionality that would normally tail on more traditional columns.

Supplier: VARIAN

VF-Xms delivers the ultimate in sensitivity and signal-to-noise ratio, and is the low bleed, more polar alternative.

Supplier: VARIAN

Agilent JW CP-1301 is a medium polarity column ideal for the analysis of herbicides, pesticides, and many pharmaceutical products.

Supplier: VARIAN

Empore® extraction disks provide a high flow rate solution for large volume sample preparation. By increasing the diameter of the disk used, the disk surface area available for sample passage increases, resulting in better solvent flow rates through the disk.

Supplier: VARIAN

SLE products use a broad-performance, inert diatomaceous earth sorbent for rapid, general sample preparation.

Supplier: VARIAN

Bond Elut™ C2 is a fairly non-polar sorbent because of the short chain length of the functional group. C2 is often used during the process of method development if analytes are retained too strongly on a C8 or C18 phase. The polarity of C2 is slightly lower than a cyano phase for polar interactions.

Supplier: VARIAN

Biocompatible adapter, 1/16” to 1/8”, PEEK, with fittings, PEEK

Supplier: VARIAN

CP-TAP CB is available in special fused silica for maximum column strength at temperatures up to 370 °C, or UltiMetal capillary for the ultimate robustness.

Supplier: VARIAN

Round, VersaPlate well plate tubes, PH, 100 mg

Supplier: VARIAN

This vacuum trap eliminates the possibility of drawing fluids into the vacuum pump that may be detrimental to it.