2983 Results for: "UPCHURCH SCIENTIFIC"

Supplier: UPCHURCH SCIENTIFIC

Unions with stainless steel bodies and PEEK fittings.

Supplier: UPCHURCH SCIENTIFIC

Stainless steel.

Supplier: UPCHURCH SCIENTIFIC

MarvelX biocompatible PEEK-lined stainless steel UHPLC connection system is easy to use and eliminates dead volume. It also provides higher repeat uses without sacrificing from consistent performance.

Supplier: UPCHURCH SCIENTIFIC

Exceptionally uniform porosity which ensures longer filtration life and consistent frit-to-frit swept volumes. These frits are biocompatible and inert to most solvents, making them ideal for bioanalytical applications. The disc rings, made of PCTFE, are slightly thicker than the frit disc, providing enhanced sealing and excellent chemical resistance.

Supplier: UPCHURCH SCIENTIFIC

FEP tubing, coloured.

Supplier: UPCHURCH SCIENTIFIC

Precolumn MicroFilters are specifically designed to directly connect into microbore or analytical columns.

Supplier: UPCHURCH SCIENTIFIC

This micro injection port adapter assembly can be connected to 360 µm Ext.Ø capillary tubing to introduce samples. It accepts standard 22 gauge Hamilton-style injection syringe needles. The needle butts directly against the connecting tubing during injections, therefore no additional swept volume is added to the fluid pathway by this adapter.

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

PEEKsil capillary.

Supplier: UPCHURCH SCIENTIFIC

Tefzel® (ETFE), natural.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-1087x, replacement washer, stainless steel, M6 flat bottom port, for 1/8" OD tubing, Stainless steel

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

PEEK, natural or coloured.

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

Back pressure regulator assemblies are designed to create incremental back pressures ranging from 5 to 1000 psi (0,3 to 69 bar). These biocompatible and stainless steel back pressure regulator assemblies are available complete with a replaceable, factory pre-set cartridge (except the 5 and 20 psi (0,3 to 1,4 bar versions).

Supplier: UPCHURCH SCIENTIFIC

These are made up of PEEK™ polymer and stainless steel.

Supplier: UPCHURCH SCIENTIFIC

Precolumn filters, PEEK bodies and PCTFE-surrounded PEEK frits.

Supplier: UPCHURCH SCIENTIFIC

These tools made from aluminium or Delrin® can be used to tighten most knurled nuts in hard to reach places. For precise tightening, the extender tools listed with ¼" hex drives are designed to adapt to any torque wrench with a female ¼" socket.

Supplier: UPCHURCH SCIENTIFIC

VacuTight™ fittings provides airtight, dependable connections under vacuum and low pressure conditions. These nuts have streamlined profiles for use in systems requiring a large number of connections in a small area, the ferrules are small size ensures sufficient nut/thread engagement, even in shallow ports. Ideal for combichem, high throughput screening, clinical diagnostic and other automated liquid handling applications.

Supplier: UPCHURCH SCIENTIFIC

NanoPort™ assemblies provide consistent fluid connections for chip-based analyses, connections will bond to a variety of substrate materials with the use of Loctite™.

Supplier: UPCHURCH SCIENTIFIC

These high quality stainless steel sample loops have burr-free, square-cut ends to ensure a flush connection to valve ports.

Supplier: UPCHURCH SCIENTIFIC

These biocompatible PEEK and perfluoroelastomer inline check valves are designed for applications where low flow path volume is critical, such as delivery to lab-on-a-chip, single-cell analysis and micro- or nano-LC post-column derivatisation.

Supplier: UPCHURCH SCIENTIFIC

The 6-port medium pressure injection valves feature easy, external sample loop customisation. Simply clean-cut a piece of tubing that represents the volume of sample you wish to inject, taking into account the port-to-port volume of the valve.

Supplier: UPCHURCH SCIENTIFIC

Specifically designed for Ismatec® pump tubings.

Supplier: UPCHURCH SCIENTIFIC

Thes filters with stems are 100% 316 stainless steel. Filters with threaded fittings have threaded Kel-F® (PCTFE) caps.

Supplier: UPCHURCH SCIENTIFIC

Ultra high performance fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures.

Supplier: UPCHURCH SCIENTIFIC

Low pressure inline filters offer excellent protection for any low pressure application.

Supplier: UPCHURCH SCIENTIFIC

Reusable fittings made from stainless steel and proprietary PEEK polymer blend. Reusable up to 10 cycles without tubing damage or impact on pressure holding ability or carry-over (5 cycles if tightened to 1,6 N.m). Pressure rating up to 30 000 psi (2070 bar). Required torque 10 in-lbs (1,10 N-m)/14 in-lbs (1,6 N-m).

Supplier: UPCHURCH SCIENTIFIC

These low pressure unions are made from PEEK, ETFE, Delrin or PP.

Supplier: UPCHURCH SCIENTIFIC

These female M6 adapters are made from PEEK, EFTE or PCTFE.