7796 Results for: "Storage+Cabinets&view=easy"

Supplier: Thermo Fisher Scientific

The Pierce™ NHS-activated magnetic beads enable covalent, amine-based conjugation of proteins to magnetic beads in a simple mix-and-go format for use in custom affinity purification experiments.

Supplier: Thermo Orion

This portable conductivity meter is ideal for a wide range of applications and advanced conductivity analysis in the field. The meter is suitable for use in the most demanding locations thanks to its IP67-rated housing.

Supplier: Thermo Scientific

The Midi 40 CO₂ incubator is designed specifically for people who require a compact culturing workspace to handle small workloads, perform personal use applications, or have limited workspace. The unit has the same performance and capabilities as full sized incubators and is a good solution to avoid shared-use environments that can present potential contamination risk through unnecessary sample handling and repeated door openings.

Supplier: Thermo Fisher Scientific

The Pierce Glycoprotein Staining Kit is a convenient, fast, and sensitive colorimetric kit for staining glycosylated proteins in polyacrylamide gels or nitrocellulose membranes using the periodic acid-Schiff (PAS) method.

Supplier: VACUUBRAND

The VP 2 Autovac chemistry pumping unit, with vacuum controller, meets the demands of modern rotary evaporation. The hysteresis-free vacuum control prevents boiling retardation and foaming, therefore, ensuring consistently high process safety and an exceptionally high performance, even at low vacuum. This control enables detection of vapour pressure and fully automatic adjustment of the vacuum level to the process requirements without any user programming or intervention.

Supplier: EUTECH

This bench meter comes with a large, one-glance-sees-all screen. Users can view pH or ORP readings, with temperature, electrode status, calibration points, date and time all at once.

Supplier: Cole-Parmer

Run multiple reactions in a single station, saving time and money.

Supplier: IKA

Multi-position digital magnetic hotplate stirrers with 5, 10 or 15 stirring positions, designed for synchronous heating and stirring, suitable for continuous operation. The wear-free magnetic coils provide noiseless and consistent stirring at all positions. Screening can be performed under reproducible conditions. The surface temperature is infinitely adjustable up to 120 °C, producing a maximum medium temperature of 70 °C (depending on type of vessel). Speed remains constant, even when load changes.

Supplier: Binder

With forced convection, the Avantgarde.Line heating and drying chambers offer quality and process reliability. The wide temperature range of up to 300 °C, mean these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ pre-heating chamber technology gives homogeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: BioTool

PetriSwiss PS 20 fills 20 dishes directly in the PetriRack. There is no need for manual stacking or any other manual operations. It is ideal for production of small, special-purpose agar batches. The dishes are safely stacked in the PetriRack and can even be transported, chilled or incubated in the rack. The rack can also be fully autoclaved. The dishes can be taken continuously from the rack. All program data, parameters and operating states are displayed clearly and understandably on a graphic display. The unit is very operator-friendly and is operated using a state-of-the-art touch screen.

Supplier: IKA

The magic LAB® is a unique and multi-functional small-scale laboratory machine. It is designed for mixing, dispersing, wet milling and incorporation of powders into liquids. The magic LAB® is most frequently used for the development of new products or for optimizing of existing process techniques, particularly in the chemical, cosmetic, pharmaceutical and food industries.

Supplier: 3M

Premium performance 3M™ PTFE glass cloth tape 5453 has a brown woven glass cloth backing impregnated with PTFE (polytetrafluoroethylene). This tape provides a slick surface on process machinery and offers an extremely low coefficient of friction which, in combination with a pressure sensitive silicone adhesive, creates a non-stick surface that performs at elevated temperatures.

Supplier: KARTELL

μAir™ technology ensures high precision, exceeding ISO 8655 standards, by minimising dead air space between the piston and liquid in the tip. This technology reduces the air compression and allows the user to achieve greater precision during laboratory practices.

Supplier: Thermo Fisher Scientific

Thermo Scientific™ Pierce™ Quantitative Fluorescent Peptide Assay is a sensitive, mix-and-read fluorescent microplate assay for the quantitative measurement of peptides and peptide mixtures.

Supplier: PEAK SCIENTIFIC

Peak scientific’s Solaris XE nitrogen generator offers a reliable, compressor-free gas solution that can comfortably meet the demands of most mass spectrometers within Waters’ portfolio of instruments. Using our tried and tested membrane technology, Solaris XE can operate with varying flow rates (up to 35 L/min of high purity nitrogen), purity (up to 99,5%) and outlet pressure can be adjusted down from 8 bar.

Supplier: Portwest

PW3 Hi-Vis baffle features HiVisTex Pro reflective tape for greater freedom of movement. The polyester ripstop outer combined with lightweight Insulatex thermal insulation offers an ultrasoft, water resistant solution for outdoor wear. Clever features include Ezee zip fastening and zipped pockets for secure storage.

Supplier: MOLNLYCKE HEALTH CARE

These sterile cleanroom gloves with beaded cuffs and curved fingers are suitable for use in aseptic and Class 100 (ISO 5)/EU GMP Grade A environments. Recommended to be worn in combination with the Biogel® NeoTech Indicator® Underglove to form a Breach Indication System.

Supplier: Corning

Corning® DeckWorks™ pipette tip system is designed to allow you to maximize storage space and help reduce the production and waste of plastic materials.

Supplier: Portwest

These overalls are perfect for the demands of the petrochemical industry. The highly technical fabric provides flame, heat, iron splash, chemical, electric arc and anti-static protection. The high collar and studded flaps on each pocket provide maximum protection.

Supplier: Portwest

These trousers are designed to keep the wind and rain out as well as offering the best specification in the industry. An elasticated waist for ultimate wearer comfort and adjustable stud hem make this garment a popular, comfortable choice with our customers.

Supplier: Portwest

The KX3 hooded softshell jackets is precision engineered using a revolutionary breathable, waterproof and windproof ripstop fabric.

Supplier: FRITSCH

aus gehärtetem Stahl premium line 1 * 1 items

Supplier: FRITSCH

80 ml grinding bowl made of sintered corundum with special lid and transmitter null

Supplier: FRITSCH

80 ml grinding bowl made of agate with special lid and transmitter null

Supplier: VWR Collection

Designed for the preparation of buffers, tissue culture media, microbiological media and other biological fluids. These vacuum filtration systems feature large diameter high performance PES membranes for guaranteed performance and maximum throughput. The full assembly includes a filtration unit and a receiver bottle with an ergonomic shape, moulded finger grips and a patented bottle cap. The centrifuge tube and funnel system allows the user to filter fluids directly into a 15 or 50 ml tube.

Supplier: VWR Collection

VWR® has expanded the VWR® carboy features and benefits by offering the Versatile Cap, Versatile Barb and state-of-the-art Spigot technology. These three components complement a wide array of applications supported by the VWR® Carboy. The leakproof cap insert with replaceable gasket enable users to quickly change the top connector of each carboy to match the application needs. Versatile Cap is stackable and is offered in both 83 mm (compatible with most industry carboys) and a 120 mm extra wide-mouth version that fits exclusively on VWR® 20 L and 40 L extra wide mouth carboys. To see homogenisation of solutions, closed adapter inserts with a clear window are available. Quick connect options are also a part of the many capabilities of this Versatile Cap technology. This includes quick-connect port combinations of two, three, and four. For bottom tubulation, Versatile Barb is used to replace the spigot and support flexibility in drainage, connection to a pump or automated equipment, or connection to a filling bell. Sanitary fitting connector is also available in order to enable the carboy to be used as a supply reservoir to a larger system.

Supplier: FRITSCH

250 ml grinding bowl made of hardmetal tungsten carbide with special lid and transmitter null

Supplier: VWR Collection

These digital meters combine six parameters in one instrument: pH, mV, temperature, conductivity, dissolved oxygen and turbidity. IDP technology optimises use and makes measurement easier (no need to recalibrate when changing the meter, and no need to adjust the meter's settings). The measured data is complete with serial number, settings and calibration data.

Supplier: KARTELL

μAir™ technology ensures high precision, exceeding ISO 8655 standards, by minimizing dead air space between the piston and liquid in the tip. This technology reduces the air compression and allows the user to achieve greater precision during laboratory practices.