9926 Results for: "Sealing+Compounds"

Supplier: Thermo Fisher Scientific

Sealing gaskets, For: 83B

Supplier: Greiner Bio-One

AMPLIseal™ is a self-adhesive sealing film notable for its low autofluorescence, in particular in the wavelength range critical for Real Time PCR. It consists of a thick PP film coated with a transparent acrylate adhesive. The adhesive layer is protected by a peelable polyester film. The strongly adhering acrylate adhesive provides reliable sealing, thereby minimising evaporation but without influencing the PCR reaction or the fluorescence measurement.

Supplier: iST Scientific Ltd

Non woven gas permeable and peelable seal for PP and PS plates. Suitable for short term incubation, agriculture and seed storage, insect storage, cell culture.

Supplier: Corning

Porous film seals PP and PS culture plates, 96 and 384-well plates, and other assay plates.

Supplier: MP Biomedicals

Clear adhesive seals for multiwell plates and tissue culture plates.

Supplier: Greiner Bio-One

VIEWseal™ is an adhesive sealing film coated with a silicone adhesive, which only sticks when the film surface is pressed on. The film is easy to work with, even when wearing gloves (the film does not adhere to gloves).

Supplier: DIVERSIFIED BIOTECH

Microplate seal, Adhesive film/foil/tape (96/384 wells), Single sheet/mat/strip, HotSeal, pre-cut self-adhesive sheets, Sealing film for PCR, HotSeal, Polyester, Sterile

Supplier: Corning

Easy application and removal for short and long-term storage. Provides tight seal to minimise evaporation and condensation.

Supplier: Corning

Polyester based with uniformly and consistently applied acrylic adhesive to eliminate the edge effect in ELISA assays. Suitable for sealing tissue culture plates, for short-term storage and incubation, for transport and the containment of biohazardous solutions.

Supplier: MICROSOLV

Microplate seal, Mat (96 wells), Single sheet/mat/strip, Organic chemical resistant sealing mat for 350 µl U-2D™ plate system, non slit

Supplier: Avantor

J.T.Baker®, Microplate seal, Mat (96 wells), Single sheet/mat/strip, Capmat for J.T.Baker® Plate Medio, Well top shape: Round, EVA, Transparent, Non-pierceable, Non sterile

Supplier: iST Scientific Ltd

Pierceble and peelable, high grade foil for polystyrene plates with good solvent resistance including DMSO. Suitable for PCR low temperature compound storage, short term room temperature compound storage.

Supplier: Brand

Aluminium sealing film can be pierced easily with a pipette tip for sample removal. Temperature range: −80 to +120 °C.

Supplier: VWR Collection

Sealing film applicator, VWR®, Film sealing paddles, non sterile

Supplier: SciLabware

Silicone rubber sheathed with PTFE.

Supplier: Corning

For sealing 96 and 384-well PCR plates.

Supplier: iST Scientific Ltd

Clear strong bonding film ideal for water thermal cyclers. Suitable for qPCR, PCR (water bath thermal cycling), storage, sample inspection, disposal of hazardous materials, use with DMSO.

Supplier: THERMO MATRIX TECHNOLOGIES

Strips of eight caps for sealing storage plates and racked cluster tubes. The strips are compatible with Thermo Scientific microplates, 0,8 ml storage plates, 1,2 ml round well storage plates and 1,2 ml cluster tubes ranges.

Supplier: Brand

Highly transparent film made of polyester is suitable for Real-Time PCR measurements. Temperature range: −40 to +120 °C.

Supplier: Brand

Polyester flims suitable for PCR and Real-Time PCR measurements. Temperature range: –40 °C to +120 °C.

Supplier: THERMO MATRIX TECHNOLOGIES

Matrix CapMats and CapStrips are engineered to maintain a strong seal at all times on tubes, microplates, and deepwell blocks. CapMats effectively seal down to –80 °C, while cap strips give the flexibility to seal individual caps or rows.

Supplier: Brand

Black sealing film made of vinyl is highly suitable for fluorescence measurements because of its light-absorbing characteristics. Temperature range: −40 to +80 °C.

Supplier: Thermo Fisher Scientific

Made from polypropylene (PP).

Supplier: Simport Scientific

Designed to fit the Bioblock™ family, these mat covers are made of a specially formulated plastic ensuring great flexibility. They allow for maximum sample volume in each well. They are resistant to DMSO and biological buffers.

Supplier: DWK Life Sciences

VMQ with bonded PTFE face.

Supplier: Avantor

Suitable to use with J.T.Baker® Plate Round Well 43001-0010, 43001-0016 or 43001-0116.

Supplier: Brady

Sealing film, Polyester

Supplier: iST Scientific Ltd

Pierceable, peelable barrier foil for PCR and sample storage.

Supplier: Thermo Fisher Scientific

Vinyl film with pressure sensitive acrylate adhesive. For application to plate top or bottom, to protect light sensitive samples.

Supplier: iST Scientific Ltd

Clear pierceable film ideal for PP, PE, PS and COC plates. Suitable for use with the ABI 3730 sequencer as the thinner structure pierces more easily.