87114 Results for: "Sampling+Systems"

Supplier: COVERIS

Sample bag accessory, Absorbent 25 ml to add in sampling bag InterLAB®

Supplier: THERMO OWL SCIENTIFIC

Comb 1,0 mm, 8-sample, For: Large Horizontal gel electrophoresis systems, Owl A2 and A5

Supplier: VWR Collection

Vertical gel electrophoresis system, VWR®, Twin S

Supplier: ENDECOTTS

Endecotts hand held sample dividers will subdivide material samples into two smaller portions by a single pass. Further subdivisions can be attained by multiple passes. Each subdivision created retains the characteristics of the original sample.

Supplier: VWR Collection

Capable of rapidly running up to 160 samples, the Midi S is a compact, but highly efficient, electrophoresis system. Versatility is built-in, with six different comb positions and a choice of 10 different comb types and thicknesses available. For rapid handling, special microtitre combs enable rapid loading with a multichannel pipette, while the effective rubber sealed 'end gates' allow gel pouring right in the tray. With its sturdy design and straight electrodes, the results are clear, crisp and quick, free from 'smiling' bands.

Supplier: AGILENT

DNA fragment or library analysis for sample quality control of samples up to 5000 bp.

Supplier: AGILENT

DNA and RNA sample quality control with flexible throughput (1 to 96) at a constant cost per sample.

Supplier: VWR Collection

The PerfectBlue Mini M electrophoresis system is a very convenient size for a wide range of routine uses. Supplied with two combs, but with a wide range of standard and microtitre combs available, this system can be used for the separation of up to 36 samples. The system comes 'ready to use' with lid, power leads and a gel tray. Its high specification construction and embedded platinum electrodes provide high quality results time after time.

Supplier: VWR Collection

Pure and Ultra Pure Water System, VWR®, Dispenser kit with on-system anchor

Supplier: VWR Collection

The smallest of the Maxi series, the Maxi S Plus is suitable for high quality sample separation of up to 160 samples per run. With this flexible system, the gel size can be split into two, three or four sections by using different comb positions, plus the gel size can be reduced using the wall comb or the casting dam system.

Supplier: Merck

Suitable for general, non-critical laboratory applications or as a pretreatment for ultrapure water systems, the RiOs™ 3 system provides an ideal solution for Type III laboratory grade water needs such as manual cleaning and rinsing, buffer preparation, feed water for humidifiers, autoclaves and glassware washers. Designed for users seeking a compact, easy to use solution, the RiOs™ 3 system will be highly appreciated for its intuitive operation, small footprint and ease of maintenance. For users needing access to ultrapure water, the RiOs™ 3 system is ideal as pretreatment for Synergy® or Milli-Q® water purification systems. Up to 30 L/day of high quality analytical grade water (Type III water) from tap water.

Supplier: VWR Collection

Capable of running 12×14 cm gels, the largest of the 'Mini' range still offers the convenience of direct gel casting in the tray, in an easy to manage product size for reliable, high quality electrophoresis. This system can be supplied with a choice of gel trays suitable for 2, 4 or 12 combs, and an expansive range of standard and microtitre combs, making this versatile system appropriate for both routine and small separation electrophoresis.

Supplier: Sampling Systems

Stainless dippers are ideal for taking surface samples from liquids and suspensions. The sampler has a 316 L stainless steel cup welded to a long reach handle. The handles are made from strong solid stainless steel bar.

Supplier: Cytiva (Formerly Pall Lab)

Ultralab™ systems, composed of Ultrareservoir™ containers and Ultrapump™ II pumps, are designed as a rapid, efficient replacement of dialysis for buffer exchange and desalting of macromolecules.

Supplier: Retsch GmbH

Dividing head, hard anodised aluminium with 8 quick-release sample outlets for Duran laboratory bottles for sample material < 5 mm, For: PT 100

Supplier: THERMO OWL SCIENTIFIC

Comb, standard, 1,5 mm, 5-sample, For: Multiple horizontal gel electrophoresis system, Owl A2-OK

Supplier: VWR Collection

Based on the Maxi M model, the Maxi M 'Revolution' offers a built-in buffer circulation system, powered by the system’s electrodes. At the cathode, hydrogen bubbles are produced and pass up a diagonally positioned pipe connected to the two sides of the tank to produce a gentle and continual circulation of the buffer. The system nulls any pH and ionic gradient – without the fuss of mechanical pumps. The system offers 6 comb positions enabling the gel to be partitioned into 2, 3 or 4 areas. In addition, the system can accommodate any of the 23 standard and microtitre comb designs described for the Maxi M model.

Supplier: FRITSCH

Sample bottle, 25 ml, For: LABORETTE 27

Supplier: Sterilin

A unique sponge swab is impregnated with the exact amount of boric acid for the sample collected and hence no fill line is required.

Supplier: VWR Collection

The ChromasterUltra Rs is the result of many years of research, development and experience, leading to the introduction of one of the most advanced, robust and easy to use UHPLC system available on the market today. Hitachi-High Technologies is a world leader in fluid control and optical analysis technology, as well as in high performance electronics. Hitachi has focused on combining the knowledge of these three key disciplines to give the world of chromatography one of the best instruments for today's demands. To arrange a demonstration with one of our experts, please email [email protected].

Supplier: Hach

They are transparent PE bags that are specially designed for chlorinated water samples and also for testing recreational water, waste water and drinking water.

Supplier: RATIOLAB

Made of clear PS.

Supplier: VWR Collection

The PerfectBlue Twin S system is designed for rapid separation of typical 10×10 cm mini gels. Due to its small size and a separation capacity of 6 to 30 samples, it is ideal for fast, analytical separations. A highly efficient cooling system ensures uncompromising results.

Supplier: GILSON LCMS

PLC 2050/2250/2500 purification systems are designed for preparative liquid chromatography (PLC) to aspirate mobile phase solvents, form gradients, inject liquid samples, and provide solutions for a preparative column for high performance liquid chromatography (HPLC), centrifugal partition chromatography (CPC), or counter-current chromatography (CCC) applications.

Supplier: Brand

Sampling dipper with reinforced rim and spout.

Supplier: GLASWARENFABRIK KARL HECHT

Sampling swabs, Cotton, Wood/cotton, Length: 150 mm

Supplier: AGILENT

Parallel capillary electrophoresis system for automated high-throughput DNA fragment analysis.

Supplier: VWR Collection

The largest of the series, the Twin L can accommodate 20×20 cm gels for the simultaneous separation of up to 50 samples making this system ideally suited to either higher throughput or separating lower molecular weight samples. The system actively manages temperature build up with an efficient water cooling system and central aluminium ceramic plates for effective and safe long-term operation.

Supplier: Hach

Sample vessel made from PS. For aqueous solutions, acids and bases.

Supplier: VWR Collection

VWR® Real Time electrophoresis systems have revolutionised DNA electrophoresis. it is no longer necessary to remove a gel from a tank, place it onto a transilluminator for viewing or place the gel into an imaging system to take a photo. These versatile and compact systems are an all-in-one replacement for a power supply, gel tank, transilluminator and gel imaging system.