1827 Results for: "Retsch GmbH"

Supplier: Retsch GmbH

Rotor, stainless steel

Supplier: Retsch GmbH

These accessories are designed for products that are difficult to separate, which are not suitable for wet sieving.

Supplier: Retsch GmbH

Agate. High quality with flawless grinding surface.

Supplier: Retsch GmbH

These grinding jars help to provide efficient milling.

Supplier: Retsch GmbH

Lid, stainless steel, Ø: — mm, Height: 400 mm

Supplier: Retsch GmbH

The Vibratory feeder is used for uniform continuous feed of pourable bulk materials and fine powders.

Supplier: Retsch GmbH

These simple to use laboratory mills have been developed for grinding and homogenising small amounts of sample. They are suitable for size reduction of hard and brittle samples as well as for soft, elastic and fibrous materials, disruption of biological cells and DNA/RNA recovery. The MM 400 can also be used for wet and cryogenic grinding. The grinding time is very short and the sample is hardly warmed at all. Application areas include mineralogy, chemical and environmental research as well as pharmaceutical sample analysis and biotechnology. Cell disruption can be achieved in reaction vials using specially designed adapters. The mills can also mix and homogenise powders and suspensions in less than a minute.

Supplier: Retsch GmbH

Grinding jars, Capacity: 50 ml, Stainless steel

Supplier: Retsch GmbH

Sieves made from 304 stainless steel are individually laser engraved with clear and precise labelling for full traceability. They are fully compatible with Retsch's existing products and can be combined with other sieves without problems.

Supplier: Retsch GmbH

Ultrasonic bath accessories, Lid, stainless steel, For: UR 2

Supplier: Retsch GmbH

Shaker, Sieve Shaker

Supplier: Retsch GmbH

The mortar grinder RM 200 comminutes inorganic and organic substances to analytical fineness. It can mix and homogenise powders, suspensions and pastes. The grinder is also ideal for the uniform trituration of homeopathic and pharmaceutical products. Depending on the sample, amounts from approx. 10 to 190 ml can be processed in the RM 200.

Supplier: Retsch GmbH

Sieves made from 304 stainless steel are individually laser engraved with clear and precise labelling for full traceability. Available in three of the most commonly used sizes. They are fully compatible with Retsch's existing products and can be combined with other sieves without problems.

Supplier: Retsch GmbH

Robust and powerful forced feed crushers that have been specifically designed for sample preparation of hard and brittle materials in batches or continuously. The crushers are suitable for applications including constructional materials, mineralogy, metallurgy, ceramics and environmental analysis. The crushed sample is collected in a removable stainless steel collector. Safety features include a no-rebound hopper and safety switch and brake to ensure an immediate stop when the unit is opened.

Supplier: Retsch GmbH

Stainless steel, according to DIN/ISO 3310/1

Supplier: Retsch GmbH

Sample splitters are used for the simple dividing and reduction of bulk materials of all kinds. Ideal for the on site reduction of sample material. Depending on the particle size, material and particle size distribution, the opening width of the passage should be 2,5 to 3 times greater than the diameter of the largest particle (particle size factor).

Supplier: Retsch GmbH

The PT 200 is a rotating tube divider suitable for representative sampling and exact dividing of larger quantiies of bulk powdered and granular materials.

Supplier: Retsch GmbH

The DM 200 disc mill is used for batch-wise or continuous preliminary and fine size reduction of medium-hard to hard-brittle solids. The robust design, including a hinged grinding chamber for easy cleaning, makes the mill suitable for a wide range of materials and applications in laboratories and pilot plants.

Supplier: Retsch GmbH

Parallel section rotor, stainless steel, For: SM 100/SM 200/SM 300

Supplier: Retsch GmbH

The GRINDOMIX GM 300 is suitable for the rapid and gentle size reduction and homogenisation of food and feed materials. They can process substances with a high water, oil or fat content just as quickly and reliably as dry, soft and medium-hard products.

Supplier: Retsch GmbH

The Cross Beater Mill SK 300 is used for batchwise or continuous primary and fine size reduction. This robust mill can be operated in laboratories but also in production environments under rougher conditions.

Supplier: Retsch GmbH

304 stainless steel, ISO 3310-1:2001-09.

Supplier: Retsch GmbH

Ultrasonic Baths are especially for fast cleaning of test sieves and grinding tools.

Supplier: Retsch GmbH

The ZM 200 is a powerful ultra-centrifugal mill for both demanding grinding tasks and efficient routine work. ZM 200 reduces the size of soft to medium-hard and fibrous materials. Ideal for rapid yet gentle preparation of analytical samples of materials such as chemicals, drugs, spices, coal, synthetic resins, plastics, pharmaceutical raw materials and finished products, plant constituents and surfactant determination in washing powders. For grinding larger amounts the use of a paper filter bag or a cyclone with 3 or 5 litre collecting receptacle is recommended. The sample is then cooled by the airstream and discharged more rapidly from the grinding chamber via the passage receptacle.

Supplier: Retsch GmbH

Sieves made from 304 stainless steel are individually laser engraved with clear and precise labelling for full traceability. They are fully compatible with Retsch's existing products and can be combined with other sieves without problems.

Supplier: Retsch GmbH

Stainless steel, according to DIN/ISO 3310/1.

Supplier: Retsch GmbH

Grinding ball, PTFE, Ø: 12 mm, For use with: MM 200/MM 400

Supplier: Retsch GmbH

Sieves made from 304 stainless steel are individually laser engraved with clear and precise labelling for full traceability. They are fully compatible with Retsch's existing products and can be combined with other sieves without problems.

Supplier: Retsch GmbH

Bottom cone with 1 quick-release sample outlet, slot width 159 mm, adjustable dividing ratio maximum 1:5, For: PT 200

Supplier: Retsch GmbH

Filter bag for clamping lid “comfort”, For: Fluid bed dryer, TG 200