7792 Results for: "Potassium+dihydrogen+phosphate&view=easy"

Supplier: PEAK SCIENTIFIC

Peak scientific’s Solaris XE nitrogen generator offers a reliable, compressor-free gas solution that can comfortably meet the demands of most mass spectrometers within Waters’ portfolio of instruments. Using our tried and tested membrane technology, Solaris XE can operate with varying flow rates (up to 35 L/min of high purity nitrogen), purity (up to 99,5%) and outlet pressure can be adjusted down from 8 bar.

Supplier: KARTELL

μAir™ technology ensures high precision, exceeding ISO 8655 standards, by minimising dead air space between the piston and liquid in the tip. This technology reduces the air compression and allows the user to achieve greater precision during laboratory practices.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: Thermo Fisher Scientific

Thermo Scientific™ Pierce™ Quantitative Fluorescent Peptide Assay is a sensitive, mix-and-read fluorescent microplate assay for the quantitative measurement of peptides and peptide mixtures.

Supplier: Portwest

These overalls are perfect for the demands of the petrochemical industry. The highly technical fabric provides flame, heat, iron splash, chemical, electric arc and anti-static protection. The high collar and studded flaps on each pocket provide maximum protection.

Supplier: Binder

With forced convection, the Avantgarde.Line heating and drying chambers offer quality and process reliability. The wide temperature range of up to 300 °C, mean these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ pre-heating chamber technology gives homogeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: MOLNLYCKE HEALTH CARE

These sterile cleanroom gloves with beaded cuffs and curved fingers are suitable for use in aseptic and Class 100 (ISO 5)/EU GMP Grade A environments. Recommended to be worn in combination with the Biogel® NeoTech Indicator® Underglove to form a Breach Indication System.

Supplier: Portwest

PW3 Hi-Vis baffle features HiVisTex Pro reflective tape for greater freedom of movement. The polyester ripstop outer combined with lightweight Insulatex thermal insulation offers an ultrasoft, water resistant solution for outdoor wear. Clever features include Ezee zip fastening and zipped pockets for secure storage.

Supplier: 3M

Premium performance 3M™ PTFE glass cloth tape 5453 has a brown woven glass cloth backing impregnated with PTFE (polytetrafluoroethylene). This tape provides a slick surface on process machinery and offers an extremely low coefficient of friction which, in combination with a pressure sensitive silicone adhesive, creates a non-stick surface that performs at elevated temperatures.

Supplier: Cytiva

NHS-activated Sepharose™ 4 Fast Flow is composed of cross-linked 4% agarose beads, NHS activated for coupling amino-containing proteins and peptides in process-scale applications. NHS (N-hydroxysuccinimide) coupling forms a chemically stable amide bond with ligands containing primary amino groups. The resin provides a spacer arm to the coupled ligand and suitable for immobilising smaller protein and peptide ligands.

Supplier: Integra

In the laboratory small volumes of liquid need be disposed of on a daily basis. This includes the removal of excess liquids from reaction tubes, aspiration of supernatant after centrifugation steps, removal of washing solutions from microplates and much more. This is often accomplished by self-made systems consisting of a trap flask, a rudimentary aspiration tool and an external vacuum source.

Supplier: LAUDA

The PRO cooling circulation thermostats are ideal for external applications where rapid temperature changes are required. Their cooling output of 0,6 to 1,5 kW, combined with a very small filling volume enable these rapid temperature changes.

Supplier: EUTECH

This rugged, user-friendly tester enables you to measure multiple parameters with just one meter. It simultaneously displays pH and conductivity/TDS/salinity with temperature.

Supplier: Portwest

This stylish coverall provides comfort and all over protection. Winning features include knee pad pockets, hook and loop for cuff and hem adjustment and multiple pockets.

Supplier: Cole-Parmer

Run multiple reactions in a single station, saving time and money.

Supplier: Simport Scientific

PP urine container with leak resistant PE screw cap, ideal for collecting, storing and transporting urine samples.

Supplier: EUTECH

This bench meter comes with a large, one-glance-sees-all screen. Users can view pH or ORP readings, with temperature, electrode status, calibration points, date and time all at once.

Supplier: VACUUBRAND

The VP 2 Autovac chemistry pumping unit, with vacuum controller, meets the demands of modern rotary evaporation. The hysteresis-free vacuum control prevents boiling retardation and foaming, therefore, ensuring consistently high process safety and an exceptionally high performance, even at low vacuum. This control enables detection of vapour pressure and fully automatic adjustment of the vacuum level to the process requirements without any user programming or intervention.

Supplier: Thermo Fisher Scientific

The Pierce Glycoprotein Staining Kit is a convenient, fast, and sensitive colorimetric kit for staining glycosylated proteins in polyacrylamide gels or nitrocellulose membranes using the periodic acid-Schiff (PAS) method.

Supplier: Thermo Fisher Scientific

The Pierce™ NHS-activated magnetic beads enable covalent, amine-based conjugation of proteins to magnetic beads in a simple mix-and-go format for use in custom affinity purification experiments.

Supplier: Thermo Scientific

The Midi 40 CO₂ incubator is designed specifically for people who require a compact culturing workspace to handle small workloads, perform personal use applications, or have limited workspace. The unit has the same performance and capabilities as full sized incubators and is a good solution to avoid shared-use environments that can present potential contamination risk through unnecessary sample handling and repeated door openings.

Supplier: Thermo Orion

This portable conductivity meter is ideal for a wide range of applications and advanced conductivity analysis in the field. The meter is suitable for use in the most demanding locations thanks to its IP67-rated housing.

Supplier: FRITSCH

aus gehärtetem Stahl premium line 1 * 1 items

Supplier: PHARSOL

The CryoHolder is a tool that enables you quick, more efficient and safe transfer of frozen cryovials. The tool is made out of aluminium so it can withstand big temperature changes; from –196 °C in liquid nitrogen up to 121 °C in the autoclave.

Supplier: SenseAnywhere

The SenseAnywhere AccessPoint is an economic and reliable plug and play device that connects SenseAnywhere’s wireless Sensors to the Cloud service of SenseAnywhere.

Supplier: Essity

Tork floor protector for Tork hand sanitiser dispenser stand black S1, discreet elevated design. It prevent hand sanitiser spills with this floor protector, which is designed for use with Tork hand sanitiser dispenser stands.

Supplier: FRITSCH

80 ml grinding bowl made of agate with special lid and transmitter null

Supplier: VELP SCIENTIFIC

The OHS Series overhead stirrers are the ideal solution for the most demanding applications: The powerful brushless motor and microprocessor ensure excellent performance and make the VELP OHS Series overhead stirrers unlike any conventional stirrer.

Supplier: LEICA MICROSYSTEMS

Ivesta 3 – For inspection and rework only, but no camera for documentation is needed.
Ivesta 3 with C-mount – Gives you the flexibility to add a camera if needed and thus turn it into a digital microscope solution.
Ivesta 3 with integrated camera – For digital image sharing directly on different devices, such as, a monitor, mobile device, or computer.

Supplier: VWR Collection

These semi-micro balances with 5" colour touch screen display and built-in ioniser ensure accurate sample preparation. Static charges accumulate in different samples that are routinely weighed in the laboratory. These static charges can build up and alter the weighing value. By blowing ions, the built-in ioniser neutralises static electricity and within seconds the sample is ready to be weighed. The balance calibration system automatically calibrates the balance when there is a temperature change or at a set period of time (factory settings), this ensures accurate measurements even if the user has not manually calibrated the balance.