6919 Results for: "PCR+Cyclers&pageNo=39&view=list"

Supplier: ProSci Inc.

STK39 is a serine/threonine kinase that is thought to function in the cellular stress response pathway. The kinase is activated in response to hypotonic stress, leading to phosphorylation of several cation-chloride-coupled cotransporters. The catalytically active kinase specifically activates the p38 MAP kinase pathway, and its interaction with p38 decreases upon cellular stress, suggesting that this kinase may serve as an intermediate in the response to cellular stress.This gene encodes a serine/threonine kinase that is thought to function in the cellular stress response pathway. The kinase is activated in response to hypotonic stress, leading to phosphorylation of several cation-chloride-coupled cotransporters. The catalytically active kinase specifically activates the p38 MAP kinase pathway, and its interaction with p38 decreases upon cellular stress, suggesting that this kinase may serve as an intermediate in the response to cellular stress. Publication Note: This RefSeq record includes a subset of the publications that are available for this gene. Please see the Entrez Gene record to access additional publications.

Supplier: Q BIOANALYTIC

OneCup it‘s so easy! The OneCup assay comes along with a minimum of pipetting steps. Everything is included in the mix. You only need to combine 20μl of the mix with 2 μl of your DNA sample and everything is ready. You have a minimum of hands-on time and you avoid mistakes during pipetting. You can run the test on all common block cyclers. Application: Detection of Listeria monocytogenes in food samples and environmental samples subsequent to a pre-enrichment step according to DIN EN ISO 20837 and 20838.Test principle. The test is dedicated to detect DNA of Listeria monocytogenes in a sample using Real-Time PCR in compliance with the ISO method mentioned below. The kit uses the TaqMan® principle. Thus the requirements of the standard, that an amplification product has to be confirmed by a hybridization step, is fulfilled. Each reactions contains an internal amplification control. Therefore, false negative results due to inhibition of the reaction can be excluded. The test included the UNG enzyme to prevent re-amplification of contaminating amplicons.

Supplier: LMS

LMS Series 1A cooled incubators are temperature controlled cabinets with fan assisted air circulation via a pre-mixing chamber. The units have a white enamelled sheet steel exterior, white pre-coated aluminium interior and polyurethane foam insulation, and feature a door lock and magnetic door gasket. The inner chamber is easy to clean, disinfection procedures are detailed in the user manual.

Supplier: bimos

Apart from special hygiene features, a laboratory chair must always be ready for use at changing places of work. It should take up a minimum of space yet still offer maximum ergonomics and seating comfort so as to guarantee precise and concentrated work over longer periods of time. Labster is ideal for everyday use in the laboratory.

Supplier: LMS

LMS Series 2 cooled incubators are temperature controlled cabinets with fan assisted air circulation via a pre-mixing chamber. The units have a white enamelled sheet steel exterior, high impact plastic interior and polyurethane foam insulation, and feature a door lock and magnetic door gasket. The corrosion resistant inner chamber is easy to clean, disinfection procedures are detailed in the user manual.

Supplier: GRANT INSTRUMENTS

The Grant Optima™ range consists of both general purpose and advanced performance thermostats combined with premium stainless steel baths (drain tap on 12, 18, 26 and 38 litre baths). Stirred circulation within the bath ensures excellent temperature stability and uniformity. Units can also be used with accessory C1G and C2G immersion coolers for operation below ambient temperatures.

Supplier: MOTIC

Microscopes for basic work in biology life science. Fixed Koehler set-up gives adequate power resources for upgrading the microscope with contrast methods like phase contrast, polarisation or darkfield. The Motic BA 210 is a robust, ready to use with pre-installed set-up of optics and 3 W LED illumination.

Supplier: LEICA MICROSYSTEMS

The Leica DM IL is a fluorescence-ready digital imaging solution designed for use in a variety of laboratory settings including cell culture, micromanipulation, immuno staining and routine live imaging.

Supplier: LMS

LMS Series 4 cooled incubators are temperature controlled cabinets with fan assisted air circulation via a pre-mixing chamber. The units have a stainless steel exterior, stainless steel lined interior with polyurethane foam insulation, and feature a door lock and magnetic door gasket. Corrosion resistant inner chamber is easy to clean, disinfection procedures are detailed in the user manual.

Supplier: G-Biosciences

Plasmid Screening ToothPick™ allows the rapid screening of bacteria for transformed plasmids. Simply pick a colony, add to Plasmid Screening ToothPick™ reagents and then analyse using restriction enzymes.

Supplier: MIELE

The PLW 8617 large laboratory glasswasher can accommodate 216 laboratory flasks, 588 vials, or 294 pipettes. The large glasswasher is flexible and simple to use, it has modular load carriers and EasyLoad system. This efficient unit has a single door, 1150 mm wide, a usable capacity of 351 litres. PLW 8617 provides reliable results, high pump performance with a variable-speed pump and features spray arm monitoring and a conductivity meter.

Supplier: Binder

The VD series of vacuum drying chambers provide fast gentle drying of non flammable solvents, delivering impressive performance through their precise temperature control and gentle drying. Expansion rack technology also ensures optimal heat transfer, shelves provide flexible placement, and the interior of the chamber is easy to clean. The VDL series of safety vacuum drying chambers ensures maximum safety when drying flammable organic solvents, and have been safety tested by a state recognised test institute (GS mark). VD/VDL units can also be purchased as modular options with vacuum pump and pump chamber to form a complete system.

Supplier: Cytiva

Ettan™ IPGphor™ 3 is a fully integrated isoelectric focusing (IEF) system optimised to deliver high throughput, speed, reproducibility, and high protein-loading capacity. Ettan™ IPGphor™ 3 is optimised for easy handling of CyDye™ labelled proteins and other light-sensitive samples, and provides temperature control critical for reproducibility in 2-D DIGE experiments.

Supplier: Hach

Robust and intuitive portable meters, instilling confidence in reporting and managing your results.

Supplier: LABORIAL

Innovative interactive worktop for laboratories, cleanrooms and healthcare. A hygienic design based on GMP guidlines which consists of a continuous, tempered glass surface on phenolic resin laminate in which is embedded a touch control screen, to provide an interactive worktop, all supported on a metallic structure. At the same time, it works as a regular worktop and solves the disinfection and contamination problems associated with the use of tablets, notebooks, PCs, keyboards and mouse in cleanrooms and other controlled environments. It allows access to any laboratory software such as electronic notebooks, LIMS, Wikis, analysis software, Office and others, on the laboratory workbench, whilst maintaining an aseptic environment. The interactive worktop can help to reduce traffic, in and out of critical areas in which the use of handheld computer devices are restricted or prohibited.

Supplier: Thermo Scientific

Thermo Scientific CultiMaxx Shelving Systems are designed for use in Heracell VIOS 250i or Heracell Vios 250i Cleanroom CTS Series CO₂ incubators to support scale-out of Thermo Scientific™ Nunc™ Cell Factory™ systems in cell therapy production and are ideal for use with Wilson Wolf G-Rex® 500M-CS bioreactors, standard Nunc Cell Factory system or the Thermo Scientific™ Nunc™ EasyFill™ Cell Factory™ system, both with 4 layers.

Supplier: THERMO LABSYSTEMS LIFE SCIENCE

Varioskan™ LUX comes equipped with a range of measurement technologies including absorbance, fluorescence intensity and FRET as standard, and with optional luminescence, AlphaScreen and time-resolved fluorescence (TRF) modules. The instrument selects the measurement wavelength using filters or monochromators, depending on which is optimal for each measurement technology.

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life; diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: HAMILTON ROBOTICS

Hamilton CO-RE tips were designed for MICROLAB pipetting workstations in order to solve the problem of sealing and alignment plagued by press-fit tip attachment techniques. Each CO-RE disposable tip has a circular groove inside the attachment orifice. An o-ring on the pipetting channel is expanded to fit this groove precisely providing an air-tight seal and straight alignment between tip and pipetting channel.