6816 Results for: "Magnesium+tert-butoxide&pageNo=37&view=easy"

Supplier: MEMMERT

Humidity chambers which have corrosion resistant, stainless steel inner chamber and housing for long-term climatic tests at constant temperature and humidity. Ideal for food processing, cosmetics, pharmaceutical, biotechnology and electronics industries. Units feature an auto diagnostic system with fault indication for temperature and humidity control. The working chamber is heated on all six sides; this together with electronic humidity control prevents condensation forming in the chamber. Distilled water is supplied from an external 2,5 litre tank by means of a self priming pump. lnternal log memory 1024 kB (ring buffer) for all relevant data, capacity is approximately three months at one minute intervals. GLP/GMP compliance is assisted by the USB interface and 'Celsius' software for programming and documentation.

Supplier: Bohlender

Safe collection of hazardous waste is an important part of the laboratory work routine. b.safe waste caps connect waste lines from your HPLC/UHPLC leak-tight with your waste container. The waste caps are available in various sizes to fit your specific waste container safely.

Supplier: Thermo Orion

Use the Orion Star T940 all-in-one titrator for flexible pH, redox and ion concentration titrations including equivalence point titrations, preset pH or mV endpoint titrations plus multiple known addition (MKA) mode for automated known addition of various ions.

Supplier: VWR Collection

VWR® incubating/refrigerating 5000I/5000IR orbital shakers are designed for a variety of shaking and incubating applications, such as cell culture, solubility studies, bacterial suspensions and extraction procedures. Large capacity platform holds up to 22,7 kg. Variable speed, microprocessor control provides consistent, uniform mixing action. Microprocessor will display last set point and will restart if power is interrupted. Ramping feature slowly increases speed to set point for added safety. The Accu-drive shaking system delivers exceptional speed control, accuracy, safety and durability. System continuously monitors shaking speed and will maintain set point even under changing loads. Displayed speed is accurate to 1% of set speed (when speed is above 100 min⁻¹), below 100 rpm, ±1 rpm.

Supplier: JULABO GmbH

High temperature circulators can be used for temperature applications up to 400 °C; units provide powerful heating capacities for shortest heat-up times and rapid compensation of endothermic reactions. Applications include use with reactors, autoclaves, distillation columns, mini plant installations, pilot plants and production facilities. Because of the closed circuit system oxidation is reduced and unpleasant odours and vapours do not escape, even at high temperatures.

Supplier: RPB SAFETY

The RPB T-Link respirator is a lightweight, multi-purpose TH3 respirator designed specifically for a range of industries, including healthcare, pharmaceutical, and industrial painting and coating. The advanced cradle provides unmatched comfort for the wearer, and keeps the lens and hood mounted solidly.

Supplier: ZEISS

Digital microscope 'Axiovert 5 digital' with integrated color camera; suitable for transmitted light brightfield, phase contrast Ph1 and reflected light fluorescence "RGB-UV". Eyepieceless technology, for use with tablets and computers.

Supplier: FRISTADS KANSAS

Thanks to its durability and high degree of comfort, the PR54 jacket is perfectly suited to workshops and industrial and service enterprises. The material is made from 65% polyester and 35% cotton. The inside is brushed and as a result conveys a pleasantly comfortably cotton feeling. The outside is also resistant to the roughest demands and will not fade even after countless washes.

Supplier: Ahlstrom-Munksjö

These syringe filters are suitable for convenient sample preparation and fluid sterilization. The syringe filters for highly loaded aqueous solutions including a glass fiber prefilter and a cellulose acetate membrane are also available with MBS housing and male Luer lock outlet.

Supplier: FRISTADS KANSAS

Thanks to its durability and high degree of comfort, the PR54 jacket is perfectly suited to workshops and industrial and service enterprises. The material is made from 65% polyester and 35% cotton. The inside is brushed and as a result conveys a pleasantly comfortably cotton feeling. The outside is also resistant to the roughest demands and will not fade even after countless washes.

Supplier: LAUDA

Cooling thermostats with menu navigation in plain text for user friendly operation. Various interface modules are available as accessories. All models are available as air or water-cooled versions. They are similar in specifications with the ECO model thermostats, in addition these models comes with natural refrigerant.

Supplier: FRISTADS KANSAS

Thanks to its durability and high degree of comfort, the PR54 jacket is perfectly suited to workshops and industrial and service enterprises. The material is made from 65% polyester and 35% cotton. The inside is brushed and as a result conveys a pleasantly comfortably cotton feeling. The outside is also resistant to the roughest demands and will not fade even after countless washes.

Supplier: FRISTADS KANSAS

Thanks to its durability and high degree of comfort, the PR54 jacket is perfectly suited to workshops and industrial and service enterprises. The material is made from 65% polyester and 35% cotton. The inside is brushed and as a result conveys a pleasantly comfortably cotton feeling. The outside is also resistant to the roughest demands and will not fade even after countless washes.

Supplier: FRISTADS KANSAS

Thanks to their durability and comfort, these trousers are perfectly suited to workshops, and industrial and service enterprises. The material is made from 65% polyester and 35% cotton. The inside is brushed, ensuring a pleasantly comfortable cotton feel. The outside can withstand the roughest demands and will not fade, even after countless washes.

Supplier: HUBER

The compact mini chillers are a cost-effective and environmentally friendly cooling solution for numerous laboratory applications.

Supplier: VWR Collection

Designed to hold multiple test tubes, test tube racks, vials or cylinders. Vortexing action is created by securing the top of the vessel in place while allowing the bottom to move freely in a defined orbit. Two stainless steel posts hold the support plate securely in place for quiet, rattle-free mixing. The support plate is easily adjustable by loosening knobs and moving the support plate up and down. The circular groove around the top of the taller post allows the support plate to be swung away from the tray for easy removal of samples. The suction cup feet dampen motion and prevent the unit from moving along the work bench. Made from stainless steel with corrosion resistant paint. Equipped with a powerful, permanent magnet motor with sealed ball bearings. Motor is rated for continuous duty.

Supplier: Avantor Fluid Handling

Versatile piston pump systems for high-accuracy fluid delivery and dispensing with an intuitive touch-screen interface.

Supplier: GILSON

Designed for performance and comfort, PIPETMAN® L comes in a comprehensive range of models, adapted to your needs in the lab. PIPETMAN L air-displacement pipettes cover a full volume range. Comfortable, precise, accurate, and reliable, use PIPETMAN L pipettes confidently in your applications.

Supplier: ProSci Inc.

Slc37A2 Antibody: The Slc37 gene family consists of four members which have 10-12 predicted transmembrane domains and belong to the sugar-phosphate transporter superfamily. Recent experiments have demonstrated that Slc37A2 is a macrophage-specific gene selectively expressed in obese white adipose tissue. Its transcript is also expressed in spleen and thymus and the cell lines RAW264.7 and THP-1. Compared to wild-type mice, Slc37A2 mRNA is expressed at nine-fold higher levels in abdominal epididymal fat deposits of ob/ob mice, suggesting that it may be required to limit the contribution of macrophages to the inflammatory state present in obesity. Slc37A2 protein is post-translationally modified with the addition of N-linked glycans and migrates as a heterogeneous species of 50-75kDa.

Supplier: FRISTADS KANSAS

Thanks to its durability and high degree of comfort, the PR54 jacket is perfectly suited to workshops and industrial and service enterprises. The material is made from 65% polyester and 35% cotton. The inside is brushed and as a result conveys a pleasantly comfortably cotton feeling. The outside is also resistant to the roughest demands and will not fade even after countless washes.

Supplier: Portwest

Slim fitting cargo trouser made from durable cotton stretch fabric that delivers long lasting comfort and freedom of movement. Packed full of features to offer enhanced performance including pre-bent knees, a high rise back waistband and an adjustable leg length for added convenience.

Supplier: FRISTADS KANSAS

Thanks to its durability and high degree of comfort, the PR54 jacket is perfectly suited to workshops and industrial and service enterprises. The material is made from 65% polyester and 35% cotton. The inside is brushed and as a result conveys a pleasantly comfortably cotton feeling. The outside is also resistant to the roughest demands and will not fade even after countless washes.

Supplier: SIOEN

Multifunctional and anti-static ARC trousers that provide excellent protection against arcs, heat, and metal splashes.

Supplier: MP Biomedicals

HEPES (N-2-hydroxyethylpiperazine-N-2-ethane sulfonic acid) is a general purpose zwitterionic organic chemical buffering agent which does not bind magnesium, calcium, manganese(II) or copper (II) ions.

Supplier: HAMILTON BONADUZ

PRP-1 polymeric HPLC columns are designed for broad ranging uses, similar to C8 or C18 HPLC materials. They combine the best characteristics of silica-based and polymeric columns resulting in highly inert and long-lasting columns. These columns are ideal for applications that require a high degree of column to column and batch to batch consistency (quality assurance, clinical trials). Unlike C8 or C18 columns, PRP-1 has no stationary phase coating. Since there is no stationary phase to hydrolyse, the column maintains its performance characteristics longer than many C8 or C18 columns.

Supplier: FRISTADS KANSAS

Thanks to its durability and high degree of comfort, the PR54 jacket is perfectly suited to workshops and industrial and service enterprises. The material is made from 65% polyester and 35% cotton. The inside is brushed and as a result conveys a pleasantly comfortably cotton feeling. The outside is also resistant to the roughest demands and will not fade even after countless washes.

Supplier: Whatman products (Cytiva)

Whatman chromatography papers are widely used across the world, reflecting their purity, high quality and consistency. They are made from specially selected cotton cellulose and rigorously quality controlled to ensure uniformity within the grade.

Supplier: LABCONCO

Clean benches provide product protection from environmental contaminants for applications requiring a particulate-free work area, including plant tissue culture, electronic part inspection, syringe filling, medical device assembly, media plate preparation, and PCR.

Supplier: 3M

The 3M Speedglas Heavy-Duty Welding Helmet G5-01 builds on the 9100 series. Having more adjustable features than ever - from the colour as seen through the welding filter to the direction of the airflow and the level of coverage.

Supplier: Priorclave

These autoclaves combine a huge internal capacity with a small floor area and are ideally suited for use in a wide range of sterilising applications such as media preparation, liquids and diluent, waste, glassware, instruments and apparatus. They are extensively used within many industries, including food, drink, dairy, pharmaceutical, agricultural, education, healthcare, research establishments and industry. All Priorclaves come complete with Biomaster antimicrobial coating, helping improved laboratory hygiene; it is effective against all bacteria and fungi including MRSA and therefore helps minimise the risk of cross contamination.