473 Results for: "Laboratory Environments"

Supplier: Texwipe

These 100% continuous filament polyester wipe with thermally sealed borders have been designed to control particle and fibre contamination. They are pre-wetted with 70% USP Isopropyl Alcohol (IPA) and 30% Water for Injection (WFI).

Supplier: Mettler - Toledo

These portable meters provide high quality conductivity measurements with the simple click of a button. The robust and waterproof design makes the FiveGo instruments the perfect companion to get reliable measurement data even in harsh conditions. Ideal for mobile applications in the laboratory, at-line, or outdoors.

Supplier: JULABO GmbH

Environmentally friendly recirculating coolers that save tap water, units are rapid and powerful, and offer short cool-down times and high efficiency. Due to the compact design, the coolers fit either on or under laboratory benchtops. FC units feature two separate multi-displays (LED) for actual and set point values.

Supplier: Brady

The B-494 polyester label is a reliable sample identification and traceability solution. The label will stay attached and remain legible, even when exposed to chemicals or stored in liquid nitrogen.

Supplier: VWR Collection

These USB Traceable® memory loc LN₂ data logging thermometers monitor the temperature in liquid nitrogen Dewars, covering cryo needs for sensitive, irreplaceable biological samples. These devices can be used in 21 CFR 11 environments.

Supplier: Texwipe

SterileWipe™ AS 10 is a 2 ply, double knit construction, 100% continuous filament polyester wipe that offers high sorbency in a sealed-border wipe to prevent particle and fibre release.

Supplier: OHAUS

This digital waving shaker provides precise speed control and a smooth, low foaming, three dimensional, 'wave' motion. Ideal for use in a wide range of laboratory applications and designed to be used in a variety of environmental conditions. Tray includes a non-skid rubber mat that is suitable for holding Petri dishes.

Supplier: VWR Seradigm

Ultimate grade FBS offers the ultimate in product quality and viral safety, undergoing additional BVD virus testing using qPCR technology. Premium grade FBS is widely used by cell culturists requiring high quality, high performance FBS for a wide variety of applications.

Supplier: Ansell

Hand-specific, ergonomically designed gloves with a beaded cuff. Ideal for use in laboratories, pharmaceutical, biotech and medical device manufacturing.

Supplier: Endress+Hauser

Digital all-round ORP sensor with low maintenance requirements and long service life.

Supplier: Sartorius Balances

Cubis® II MCA analytical balances with advanced user interface offer maximum weighing capacity between 120 and 520 g in combination with readability of 0.1 mg.

Supplier: MOLECULAR DEVICES

The SpectraMax® iD5 multi-mode microplate reader is a complete laboratory solution to increase your research capabilities and comes with built-in absorbance, fluorescence, luminescence, time-resolved fluorescence (TRF) and tuneable fluorescence polarisation (FP) read modes. In addition, the SpectraMax® iD5 can be expanded to include bottom-read luminescence, TR-FRET, HTRF®, BRET, dual luciferase reporter assays with injectors and Western blot detection.

Supplier: Azbil Telstar Technologies

The ergonomically designed BiOptima Class I microbiological safety cabinets ensure optimum efficiency and high-level energy savings. Telstar BiOptima ONE is a range of high quality Class I biological safety cabinets, ensuring the highest level of protection for operator and environment. The principle of BiOptima ONE is total extraction of the air through a HEPA filter. Ambient air is drawn from the front opening and extracted through the H14 HEPA filter, to ensure no harmful particles are released into the environment. BiOptima One is standard available in 90 and 120 cm approx. (3 and 4 ft.) widths.

Supplier: KCL by Honeywell

These disposable gloves made of special nitrile offer a high level of chemical resistance and excellent comfort.

Supplier: SCIENTIFIC INDUSTRIES ELMIS

Bead Genie™ is ideal for bead beating, lysing, extraction, or homogenisation applications.

Supplier: Bohlender

Safe collection of hazardous waste is an important part of the laboratory work routine. b.safe waste caps connect waste lines from your HPLC/UHPLC leak-tight with your waste container. The waste caps are available in various sizes to fit your specific waste container safely.

Supplier: VWR Collection

The VWR® Traceable® memory loc, USB, data logging barometer simultaneously monitors barometric pressure, temperature and humidity. This device can be used in 21 CFR 11 environments.

Supplier: VELP SCIENTIFIC

The UDK Series distillers are designed to meet the most challenging demands and requirements for diverse applications, according to international standards: Kjeldahl nitrogen TKN, proteins, ammoniacal nitrogen, nitric nitrogen (Devarda), phenols, TVBN and volatile acids, cyanides, and alcohol content. Five different UDK models are available with different automation levels to match any laboratory requirement of automation and throughput. A complete range of distillers featuring exclusive technologies to meet any laboratory requirement for the determination of analytes in different fields of application.

Supplier: GA

Cryogenic direct thermal labels intended for labeling already frozen surfaces and containers under deep-freeze conditions, as low as (–80 °C).

Supplier: DuPont

Tyvek® 500 HP coveralls, model TY178S, are specifically designed for workers operating with a full-body harness in environments where hazardous particle or light liquid aerosol hazards are present. Designed to be worn over a full-body harness, the innovative, patent-pending garment design allows workers to access and utilise multiple D-rings on their full-body harness. This garment is compatible with a variety of full-body harness models, making it suitable for a wide range of applications including painting, cleaning, maintenance, and more.

Supplier: Sartorius Balances

The Cubis® II laboratory balances are modular, therefore they allow to choose between applications and configurations which suit the best to the needs. These balances can be configured at the level of display, draftshields, software applications and hardware functions.

Supplier: SCHOTT AG Lighting and imaging

The SCHOTT EasyLED portfolio for stereo microscopy delivers precise LED light for a wide variety of applications, such as laboratory and diagnostics, industrial applications, education, or forensic science. The series offers robust design and easy handling in a compact device, with a range of accessories for specific requirements.

Supplier: Sartorius Balances

Cubis® II MCA high-capacity toploading balances with advanced user interface offer a maximum load between 11,2 and 70,2 kg and readability between 0,1 and 1 g provide the ideal model for every application.

Supplier: WARTEWIG

The SteriMax basic infrared loop steriliser provides high speed annealing and sterilising without a flame.

Supplier: Sartorius Balances

The Cubis® II laboratory balances are modular, therefore they allow to choose between applications and configurations which suit the best to the needs. These balances can be configured at the level of display, draftshields, software applications and hardware functions.

Supplier: GA

This clear liner-less cryogenic tape for already frozen surfaces is provided with innovative GatorCUT technology, making it effortlessly hand-cuttable. Perfect for identifying frozen samples and containers without concealing their contents, ensuring they remain visible.

Supplier: Sartorius Balances

Semi-micro balances have a readability of 0,01 mg or 10 µg and a maximum weighing capacity of up to 220 g.

Supplier: Sartorius Balances

Cubis® II MCA semi-micro balances with advanced user interface offer readability of 10 µg and a maximum weighing capacity up to 220 g. Used for weighing small sample amounts down to the µg-range.

Supplier: Sartorius Balances

The Cubis® II laboratory balances are modular, therefore they allow to choose between applications and configurations which suit the best to the needs. These balances can be configured at the level of display, draftshields, software applications and hardware functions.

Supplier: DWK Life Sciences

The mini bottle bench top roller culture system is designed for small scale mixing and agitation using bottles that are too small to be accommodated by standard roller apparatus. It is ideal for 30 ml or larger serum bottles, 100 to 125 ml media bottles or 38×200 mm culture tubes for the growth and observation of single chicken or rat embryos. The compact size makes it suitable for laboratories with limited space and for use with standard incubators and cold rooms. Each single deck unit will accommodate a minimum of four bottles.