208 Results for: "LTE SCIENTIFIC"

Autoclaves, Touchclave®-Lab 'K' series

Supplier: LTE SCIENTIFIC

‘K’ series models are designed to operate using either a steam generator situated beneath the chamber, or via the customer's own direct steam supply. This arrangement maximises the usable chamber volume and provides a clean, unencumbered chamber, free from heaters and water.

Expand 10 Items

Accessories for incubators IP series

Supplier: LTE SCIENTIFIC

Shelf for 100-litre models

Expand 4 Items

Factory fitted options for ovens, OP series

Supplier: LTE SCIENTIFIC

Oven

Expand 4 Items

Ovens, OP series

Supplier: LTE SCIENTIFIC

Range of ovens with choice of either natural convection or forced convection by means of a fan. U (Uni-program) models offer single temperature selection/control at the push of a button. Following a mains power failure, the controller will automatically re-start. M (Multi-program) models will allow up to eight multiple-step cycles to be stored in the memory. Selectable temperature ramping function allows controlled temperature rates to be programmed into a cycle, repeated for a specified number of times or held continuously until interrupted. Following a mains power failure, recovery options include cycle hold, start cycle from the beginning or re start cycle from point of interruption.

Expand 16 Items

Drying cabinets with sliding doors, Unitemp

Supplier: LTE SCIENTIFIC

Simple compact cabinets, temperatures up to 85 °C can be obtained by means of an adjustable thermostat. All have fully adjustable shelves and toughened glass sliding doors. Models are available made either from polished stainless steel or from rust proofed steel finished in a textured, light grey, epoxy paint.

Expand 4 Items

Accessories for autoclaves, Touchclave® series

Supplier: LTE SCIENTIFIC

Condensate unit for Touchclave-R (not required if vacuum option is ordered)*, For: Autoclaves, Touchclave

Expand 14 Items

Autoclaves, Touchclave®-R series

Supplier: LTE SCIENTIFIC

The Touchclave®-R range of cylindrical-chambered autoclaves has been designed with a large range of standard features not seen before on this type of steriliser. These features ensure high productivity and performance, short cycle times, versatility and the reliability demanded by the busy laboratory.

Expand 7 Items

Large capacity ovens, Swallow™

Supplier: LTE SCIENTIFIC

Oven, Large Capacity, Swallow™ 750, Capacity: 750 L, Convection type: Forced convection, Temperature range: 40…250 °C, Temperature fluctuation (time): ±0,2 °C, Temperature variation (spatial): ±5,0 °C, Max. load per shelf: ~15-20 kg, Shelves supplied (max.): 3 (19), Int. W×D×H: 1120×670×1000 mm, Ext. W×D×H: 1270×865×1270 mm

Expand 3 Items

Freeze dryers, Lyotrap™ series

Supplier: LTE SCIENTIFIC

The Lyotrap™ series are designed for the majority of laboratory applications with a range of accessories and options to handle samples in flasks, on trays, in vials and in ampoules. Three models are available to match requirements of scale and control from 3 to 5 kg of ice capacity in the condenser.

Expand 3 Items

Autoclaves, Touchclave®-Lab 'F' series

Supplier: LTE SCIENTIFIC

The Touchclave®-Lab 'F' models have been designed to offer a good level of standard features at a more affordable price. In this range, steam is generated within the chamber, therefore water inside the chamber needs to be topped up periodically, either manually or automatically. Low-level water sensors will prevent the cycle from starting should there be insufficient water. All models are fitted with castors and will fit through standard doors.

Expand 2 Items

Shelves for swallow ovens and incubators

Supplier: LTE SCIENTIFIC

Shelves, Shelf for swallow oven 464-050, forced convection

Expand 3 Items

Drying cabinets with filtered air, Unitemp

Supplier: LTE SCIENTIFIC

This drying cabinet has a fine filter on the input side of the fan heater system, so washed equipment is not soiled by 'dirty' air entering the cabinet. A hydraulic thermostat allows control of the air temperature from 5 °C above ambient to 65 °C and permits controlled drying of heat sensitive substances including plastics. The front panel is fitted with a mains on / off switch, neon lamps to indicate 'mains on' and 'heaters on' and a temperature control knob.

Expand 1 Items

Incubators, IP series

Supplier: LTE SCIENTIFIC

The IP Series ™ of incubators is available in different sizes from 60 to 250 L. Fan circulated or natural convection options are avialable, plus there is a choice of PID control systems to suit most applications. Fast heat-up times, almost undetectable overshoot and superb accuracy table make the IP Series a class-leading product. These incorporate a manual reset over-temperature cut-out, in line with IEC1010-2-010.

Expand 16 Items

Drying cabinets

Supplier: LTE SCIENTIFIC

Floor standing drying cabinets made of rust proofed steel, finished in textured epoxy with four adjustable reinforced chromium plated shelves. The sheathed heating elements, situated below a perforated base plate are vented either by natural convection or, for more rapid drying, via a top mounted extraction system, temperature control is by means of an energy regulator.

Expand 4 Items

Accessories for autoclaves, Touchclave-ecotech

Supplier: LTE SCIENTIFIC

Morrison discard box for AE40H

Expand 17 Items

Large capacity incubators, Swallow™

Supplier: LTE SCIENTIFIC

The Swallow incubators are simple to operate and are controlled by means of a microprocessor system, offering precise temperature control, fast heat-up times and almost undetectable overshoot.