Supplier: LABCONCO

WaterPro PS Polishing Stations deliver Type I, 18,2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1,8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

Supplier: LABCONCO

For use with Basic™ 47, Basic 70, Fiberglass 30, Protector® XStream®, Protector Premier™, Protector ClassMate®, Protector PVC perchloric acid, protector stainless steel perchloric acid, logic+, logic, cell logic, puriCare procedure stations and protector radioisotope laboratory hoods.

Supplier: LABCONCO

These glove boxes with stainless steel liner provide inlet and outlet HEPA or ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials. Available with two or four glove ports (double version).

Supplier: LABCONCO

Fast-Freeze® flasks for FreeZone® freeze dry systems are designed to be easier to handle, faster to load, and more convenient to use in the laboratory for freeze drying.

Supplier: LABCONCO

Organic carbon filter, trace odor, for 0,6 m models, 3 kg, 457×457×25,4 mm

Supplier: LABCONCO

Evaporator, centrifugal, 12-13 mm rotor, 40 holes for 1,5 ml microcentrifuge tubes, 16 holes for 12×55 mm tubes, and 92 holes for 12×75 mm tubes

Supplier: LABCONCO

XPert weigh boxes have inlet and outlet HEPA filters and provide a leak-tight physical barrier to protect the operator from hazardous airborne particulates and powders.

Supplier: LABCONCO

Purifier®, Aluminum bead bath

Supplier: LABCONCO

These fume adsorbers are for light duty histology cover slipping and staining areas. Activated carbon media adsorb organic odours and noxious vapors released by solvents like xylene and toluene while clean air is recirculated into the laboratory. These enclosures are low profile, completely portable and require no ductwork. They easily accommodate shallow countertops or those with overhanging cabinets.

Supplier: LABCONCO

General chemistry/UF polishing kit

Supplier: LABCONCO

PVC elbows 90° are compatible with thermoplastic duct.

Supplier: LABCONCO

The Basic™ hood is ideal for rooms with ceilings below 2,4 m, 203,2 mm and for shallow countertops with 200 V,50 Hz

Supplier: LABCONCO

SteamScrubber™ glassware washers are designed to wash and dry general purpose labware. They have stainless steel top and bottom racks that accommodate basket inserts for a wide variety of glassware shapes and sizes, primarily beakers and other wide-mouth glassware. Specialised inserts for BOD bottles, petri dishes, culture tubes and small utensils enhance the SteamScrubber's versatility. Also accommodates upper and lower spindle racks.

Supplier: LABCONCO

The Logic® Vue is a specialised class II enclosure providing personnel and product protection for large automated instruments such as liquid handlers. The Logic® Vue provides laminar ISO 5 air.

Supplier: LABCONCO

XPert TXE Equipment Enclosures are designed to address the needs of pharmaceutical research and quality control laboratories.

Supplier: LABCONCO

Ductless ventilation systems with glass tops and sides and low profiles are well suited for educational settings. Clean-Sweep air foil and zone-perforated rear baffle maximise containment.

Supplier: LABCONCO

CentriVap® vacuum concentrators are available as complete systems or system packages. The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, and so on). Other models feature Heat Boost, which surrounds the chamber wall, to further speed evaporation of high boiling point solvents.

Supplier: LABCONCO

Rotor for 12×15 ml vials (Ø 20 mm × 70 mm), PTFE coated aluminium

Supplier: LABCONCO

The PVC acid digester Protector® laboratory hoods are strong acid resistant. Their liners are made up of unplasticised polyvinyl chloride.

Supplier: LABCONCO

6-Pin communication cable, AtmosPure™

Supplier: LABCONCO

Kjeldahl digestion units are designed for laboratories that require separate digestion stations.

Supplier: LABCONCO

These glove boxes provides a leak-tight environment to perform work with contamination-sensitive materials under vacuum or in an inert environment.

Supplier: LABCONCO

Solid epoxy work surface, flat, no cupsink cutout for 3 inch width hood, enclosures, glove boxes, 910×760×30 mm, 45 kg

Supplier: LABCONCO

Protector® work stations are specifically designed for the needs of pathologists and histotechnologists. Like a traditional fume hood, these enclosures have a front air foil and rear baffle to direct the inflow air across the work area and away from the operator. Ideal for cramped or crowded labs, protector work stations have a low profile so they fit easily under standard upper cabinets. Designed with a built-in blower which use specially treated carbon filters.

Supplier: LABCONCO

FreeZone® benchtop shell freezers provide a compact system for prefreezing samples for lyophilization.

Supplier: LABCONCO

Blower foot switch (foot pedal and power cord), provides a hands-free means to temporarily shut off power to the blower when obtaining sensitive balance readings or manipulating fine powders

Supplier: LABCONCO

FreeZone® console freeze dryers with or without stoppering tray dryers are designed for lyophilising moderate to large loads and stoppering vials or serum bottles under vacuum. The console features a front viewing window and interior space for a vacuum and accommodation for a full size tray dryer such as the FreeZone® stoppering tray dryer pump (sold separately).

Supplier: LABCONCO

Evaporator, centrifugal, PTFE-coated aluminium block for 110 tubes Ø 12 mm, max. height 150 mm

Supplier: LABCONCO

Gloves for glove boxes, Neoprene, Black, Thickness: 0,015 gauge, Glove size: 8,5

Supplier: LABCONCO

This HEPA-filtered glove box has inlet and outlet HEPA filters and provides a leak-tight physical barrier to protect the operator from hazardous airborne particulates and powders.