Supplier: Industrial Physics

Cylindrical film applicator with four application sides for applying paint films of four different predefined thicknesses in film width 60 or 80 mm. Suitable for applying a host of different products onto flat and relatively solid substrates. Made from high grade stainless steel, the film applicator will not be affected by acid or base elements.

Supplier: Industrial Physics

This automatic adhesion tester measures the adhesion of coatings applied on metal, wood, concrete and similar substrates.

Supplier: Industrial Physics

Dip cups can be used to provide a quick 'break-thread' flow time comparative measurements on site in a manufacturing environment.

Supplier: Industrial Physics

The Automatic Film Applicator Standard provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors.

Supplier: Industrial Physics

This high precision destructive hygrometer is designed for applications in concrete, sand cement, and other construction materials. The water present in the sample chemically reacts with calcium carbide produces pressure in the vessel, which is proportional to the residual moisture content.

Supplier: Industrial Physics

These coated metal calibration standards consist of a set of four calibration plates.

Supplier: Industrial Physics

Electronic coating gauges use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals with all PosiTector 6000, 200, DPM, UTG, RTR and SPG probes.

Supplier: Industrial Physics

Bird-type film applicators feature one flat edge and one application side for applying a pre-defined coating thickness. Bird-type applicator single gap is available in film width 50 and 75 mm and can be customised for applying a host of different products onto flat and relatively solid substrates. All Bird-type film applicators are made from high grade stainless steel and are not affected by acid or base elements.

Supplier: Industrial Physics

Combination gauge equipped with two different tips: Sharp needle for surface roughness and round tip for coating thickness.

Supplier: Industrial Physics

RAL 840-HR are the basic collection for matt colour shades and RAL 841-GL for glossy colour shades. Contains safety and signalling colours with the colour requirements of DIN regulations.

Supplier: Industrial Physics

The PosiTest DFT measure coatings on all metals - The DFT Fe measures non-magnetic coatings on steel while the DFT Combo measures both non magnetic coatings on steel and non conductive coatings on aluminum and brass.

Supplier: Industrial Physics

profi LIGNO are moisture meters specifically designed for wood and building materials such as screed or gypsum.

Supplier: Industrial Physics

mini LIGNO classic+ is a wood moisture meter that provide four wood groups and 16 single species of wood.

Supplier: Industrial Physics

mini LIGNO duo is a wood moisture meter that provides four different base-wood groups, eight building materials, such as gypsum or screed.

Supplier: Industrial Physics

Lory viscosity cup designed for quick measurements on location or during production processes.

Supplier: Industrial Physics

Drying time recorder tool can be used as an optional test tool for the automatic film applicators. This device allows the user to accurately define the drying time of various types of coatings within the time range of 1 minute to 48 hours. The drying time recorder option can be easily clamped on any standard automatic film applicator with firmware 2,01 and above.

Supplier: Industrial Physics

These Bend Test Mandrels are designed to bend coated panels over a conical shaped mandrel in order to assess the elasticity or resistance of a coating, paint or varnish to cracking, elongation and/or detachment from a metal test panel.

Supplier: Industrial Physics

Surface profile roughness gauge for ultrafast measurement of the peaks and valleys of a surface.

Supplier: Industrial Physics

RAL book colours for hotels.

Supplier: Industrial Physics

Accessory for microscopes, For: USB digital microscope, Stainless steel microscope holder with three strong magnets

Supplier: Industrial Physics

Test charts are used for testing physical properties of coating, lacquers, and inks.

Supplier: Industrial Physics

This replica tape is specifically designed to measure blasted surfaces. By placing the Tqc replica tape on the surface and rubbing over it, the Rt (total roughness) or peak-to-valley height of the profile can be taken and measured.

Supplier: Industrial Physics

Fully waterproof, floating pH tester with large display. The modular design makes it extremely easy to change electrodes.

Supplier: Industrial Physics

The GasAlert MicroClip offers simultaneous monitoring of two gasses (O₂, LEL) in a rugged compact case for confined areas.

Supplier: Industrial Physics

This thickness gauge is designed for the measurement of non magnetic coatings include paint, enamel, plating, hot-dip galvanising on steel. A small magnet can be placed with pin-point accuracy on small parts and on peaks and valleys.

Supplier: Industrial Physics

The quality of pretreatment prior to application of the coating is essential to the quality of the coating. This pretreatment set is designed for all the parameters during the pretreatment of steel prior to painting.

Supplier: Industrial Physics

Ring-type surface probes to measure object temperature.

Supplier: Industrial Physics

Magnet probes to measure object temperature, fitted with an ultra strong magnet, but still with a very low mass and size.

Supplier: Industrial Physics

Accessory for coating tester, For: Colorbox, Light tube "day light" D65, 1200 mm

Supplier: Industrial Physics

These hardness tests are pocket instruments for testing the hardness and wear/scratch resistance of materials such as coatings, lacquers, plastics or related products.