Supplier: Dräger

To measure the 'spot concentrations' of hydrogen peroxide for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of hydrogen sulphide for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, measurement of personal exposure in the inhalation area, detection of leaks in, for example, pipelines or gas installations, and air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of ammonia including determination of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces. For use with an Accuro® pump. Other basic substances such as organic amines are indicated as well. For Ammonia 2/a, 5/a, 5b, the indication is not affected by :

Supplier: Dräger

Different gases and vapours can be detected and measured such as concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

The X-plore® 1300 series offers models in all three EN protection classes: FFP1, FFP2 and FFP3. Available with or without CoolMax™ exhalation valve for reduced exhalation resistance and to avoid a build-up of heat. Odour models for tackling unpleasant odours are equipped with an additional activated carbon layer.

Supplier: Dräger

To measure the 'spot concentrations' of carbon dioxide for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of sulphur dioxide for use with an Accuro® pump.

Supplier: Dräger

Ergonomic pump for use with short-term tubes.

Supplier: Dräger

The X-plore® 1700 series offers models in all three EN protection classes: FFP1, FFP2, and FFP3. Available with or without CoolMax™ exhalation valve for reduced exhalation resistance and to avoid a build-up of heat. Odour models for tackling unpleasant odours are equipped with an additional activated carbon layer.

Supplier: Dräger

Calibration gas with nitrogen background in non refillable cylinder.

Supplier: Dräger

To measure the 'spot concentrations' of carbon dioxide for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of nitrous fumes for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of mercaptan for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of phosgene for use with an accuro® pump - Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, and air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

Mask, reusable, Half mask

Supplier: Dräger

The single gas detector is designed for manufacturing petrochemical products, aseptic packing or handling of rocket fuel and for handling hydrogen fluoride (HF), hydrochloric acid (HCl), hydrogen peroxide (H₂O₂) or hydrazine.

Supplier: Dräger

Specifically designed for fast measurements with one hand, this gas detector pump allows to use tested tubes under extreme conditions.

Supplier: Dräger

This combined fire and industrial escape hood was developed with users, placing the focus on the fastest possible escape. Optimised operation and wearing comfort, a robust housing and a tested ABEK CO P3 filter ensure protection from toxic industrial and fire-related gases, vapours and particles for at least 15 minutes.

Supplier: Dräger

The X-am® 2500 was especially developed for use as personal protection. The 1 to 4 gas detector reliably detects combustible gases and vapours, as well as O₂, CO, H₂S, NO₂ and SO₂. Reliable and fully mature measuring technology, durable sensors and easy handling ensure a high degree of safety with extremely low operating costs.

Supplier: Dräger

The powered air-purifying respirator (PAPR) X-plore 8000 offers a number of user friendly standard and specialised carrying systems for standard and decontamination applications. Dräger has also developed a wide range of tight- and loose-fitting headgear such as half and full-face masks, short and long hoods and helmets with visor and protective visor. Standard and enhanced flexibility hoses are available and compatibility is ensured. Modular components: A wide range of components for every application.

Supplier: Dräger

This gas detection system without sensor reliably measures combustible gases and vapours as well as oxygen, harmful concentrations and organic vapours.

Supplier: Dräger

These chips are suitable for the gas analyser with chip measurement. They are calibrated for up to two years.

Supplier: Dräger

To measure the 'spot concentrations' of carbon monoxide for use with an Accuro pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of chlorine for use with an Accuro® pump.

Supplier: Dräger

To measure the 'spot concentrations' of acetone for use with an Accuro pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

Configurator for Dräger X-am® 2800 consisting of basic device with data logger, delivered with manufacturer and calibration certificate.

Supplier: Dräger

To measure the 'spot concentrations' of perchloroethylene for use with an Accuro pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

This air flow indicator for special applications can be used in all operations relating to draught detection.

Supplier: Dräger

The X-plore® 3300 and 3500 half masks are low maintenance and affordable. They are equipped with two lateral bayonet connections that enable a whole range of bayonet filters to be used.

Supplier: Dräger

To measure the 'spot concentrations' of nitrogen dioxide for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.