38095 Results for: "Disinfection+Systems"

Supplier: Merck

Elix® Essential delivers Type 2 water customised to fit a broad range of research areas. It is designed to be fed from potable water and is the ideal feed for any laboratory equipment, including ultrapure water systems such as Milli-Q® systems.

Supplier: Merck

External solenoid valve for XL systems, For: Water purification systems, Milli-Q® HX 7040/7080/7120/7150 SD

Supplier: Merck

Multi system installation kit, Milli-Q®

Supplier: Merck

Economical water system, producing CLRW (Clinical Laboratory Reagent Water) quality with a dispensing flow rate to analyser up to 2 l/min. For clinical analysers with pure water needs up to 480 L daily

Supplier: VWR Collection

This compact system produces EDI-based Type II water directly from tap water. Quality of Type II water meets or exceeds water quality as defined by ASTM, CAP, CLSI and ISO 3696 / BS 3997, and also complies with the purified water requirements from the European and U.S. Pharmacopoeia.

Supplier: BTX

The ECM 399 system is an economical electroporation system for gram negative bacteria and yeast applications. Ideal for basic transformation in research and academic labs.

Supplier: CONTEC

Contec ProChlor is a fast acting innovative sporicidal biocide designed for use in pharmaceutical cleanrooms. A blend of hypochlorous acid in purified water. Ready-to-use format.

Supplier: VWR Collection

The shiroGEL vertical 20 offers application flexibility and is distinguished by its ease of gel casting and set-up, requiring only four screws to secure up to four 20×20 cm gels. This vertical screw clamp technology distributes pressure evenly along the height of gel rather than in the centre to eliminate plate bowing and gel compression, while maintaining a leakproof seal during casting. A built-in inner buffer chamber within the PAGE insert allows set up to be completed without inclusion of an upper buffer chamber. These systems are ideal for 1D and 2D SDS-PAGE, native, preparative, gradient and high resolution nucleic acid electrophoresis.

Supplier: Cytiva

Horizontal gel electrophoresis system

Supplier: VWR Collection

This 'two in one' lab water system produces ultrapure (Type I) and RO (Type III) water from tap water. Quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards.

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Vacuum aspiration system. A plastic supporting plate with carrying handles and attachments for holding the vacuum-proof suction flask make the system compact and mobile at any time.

Supplier: Thermo Fisher Scientific

KingFisher™ Duo Prime magnetic particle processor is a compact, flexible purification system that is ideal for laboratories requiring nucleic acid purification, and is easily modified for use in proteomics and cell isolation. It provides excellent reproducibility with minimal hands-on time, and has a small footprint in the laboratory. Either small-volume (10 to 50 µl) or large-volume (300 to 500 µl) samples can be processed on the KingFisher™ Duo Prime, due to its interchangeable magnetic rod design.

Supplier: Merck

Foot pedal, For: Ultrapure water system, Milli-Q IQ 7000

Supplier: Merck

This system is a very compact solution designed for low volume analysers. It efficiently combines reverse osmosis (RO) technology with deionisation (DI) resins to produce CLSI® Special Reagent Water. With high resistivity and low TOC (typically >10 MΩ.cm at 25 °C and <50 ppb before storage), this product water is of higher quality than either water produced by stills or service DI water.

Supplier: VWR Collection

Vertical gel electrophoresis system, VWR®

Supplier: CONTEC

Contec Sterile Denatured Ethanol is a blend of 70% v/v denatured ethanol with 30% water for injection or purified water. Contec’s ethanol is only denatured with IPA creating a very low residue product.

Supplier: Thermo Fisher Scientific

Cryopreservation system, 88,9 mm riser, for CryoPlus 4, : N/A

Supplier: CONTEC

Contec® ProChlor is a ready to use sporicidal biocide based on stabilised hypochlorous acid with purified water and is specifically designed for cleanroom environments.

Supplier: Merck

Milli-Q® CLX 7000 analyser feed systems produce up to 3000 L/day of pure water from tap.

Supplier: Dräger

Aerotest Alpha allows the quality of breathing air supplied by a compressor or compressed gas cylinder to be determined.

Supplier: Merck

The Milli-Q® SQ 200 water purification system delivers ultrapure (Type 1) water from an SQ Switch 3,5 L tank filled with pure reverse osmosis (RO) water.

Supplier: Dräger

Configurator for Dräger X-am® 2800 consisting of basic device with data logger, delivered with manufacturer and calibration certificate.

Supplier: THERMO OWL SCIENTIFIC

Vertical gel electrophoresis system, accessory, Heat sink, For: Adjustable electrophoresis system, OWL ADJ1

Supplier: Merck

Synergy® ultrapure water systems are ideal for laboratories with access to purified water that needs a 'point of use' supply of high quality ultrapure water. The Synergy® system is suitable for users needing 2 to 20 L/day. The system produces Type I water from pre-treated water at a flow from 1 to 1,5 L/min. The water produced is suitable for the preparation of buffers for liquid chromatography, biochemical experiments, isocratic or gradient solutions for HPLC analysis, culture media for bacteriological analysis or cell cultures and solutions for spectrophotometry, spectroscopy and other analytical techniques.

Supplier: Corning

Horizontal gel electrophoresis system

Supplier: EDVOTEK

Single 6-tooth comb, For: Edvotek systems

Supplier: VELP SCIENTIFIC

BOD measurement system, Dark glass bottle 500 ml for BOD systems

Supplier: Merck

The Milli-Q® SR 240 water purification system delivers pure reverse osmosis (RO) water to a mobile SQ Switch 3,5 L tank. This tank is easily transferred to the Milli-Q® SQ 200 Purification System to produce fresh ultrapure water anywhere in the lab. Thanks to the mobile SQ Switch tank, this water system adapts to any lab configuration: the RO water production unit is placed next to a potable water source, while unlimited ultrapure dispensing modules can be positioned anywhere in the lab or building with an electrical outlet. This allows for a flexible installation that can be easily adapted and scaled according to changing lab requirements.

Supplier: VWR Collection

Horizontal gel electrophoresis system, VWR®

Supplier: THERMO OWL SCIENTIFIC

Horizontal gel electrophoresis system