6284 Results for: "DR+WEIGERT&pageNo=47&view=easy"

Supplier: Thermo Fisher Scientific

Suitable for even the most demanding and sensitive applications, the family of Thermo Scientific™ Barnstead™ GenPure™ water purification systems deliver ultrapure 18,2 MΩ.cm water with consistent quality.

Supplier: FRISTADS KANSAS

Hard-wearing jacket made from 65% polyester, 35% cotton, with napped inner.

Supplier: ERGOMAT

The Ergomat Softline is made from nitrile rubber and is designed to increase comfort while reducing tripping hazards, body aches, quality issues, and sick leaves. It is designed for areas where resistance to oil, petrochemicals and heat is important. Ideal for wet environments, in case of excessive volumes of fluids, the Softline can be die-cut to allow for drainage.

Supplier: FRISTADS KANSAS

Short trousers made of 65% polyester and 35% cotton, with soft nap on reverse side.

Supplier: FRISTADS KANSAS

Overalls made from 65% polyester, 35% cotton, with soft nap on reverse side.

Supplier: Sartorius

These filter papers are used for routine analyses like clarification, determination of substances, but also as discs with a center hole for technical applications. Grades with a wet burst resistance >30 kPa are referred to as wet-strengthened and are therefore
suitable for pressure or vacuum filtration.

Supplier: FRISTADS KANSAS

Tubular knit T-shirts made from 100% ring-spun cotton (single jersey). The grey melange shirt is made from 85% cotton and 15% viscose, while the yellow version is made from 65% polyester and 35% cotton.

Supplier: VWR Collection

Routine inverted fluorescence microscopes for transmitted brightfield, darkfield, phase contrast and fluorescence observations. Ideal for tissue culture research in clinical and biotechnology laboratories.

Supplier: FRISTADS KANSAS

Working trousers made of FAS®, Fristads best navy twill manufactured from 100% cotton.

Supplier: FRISTADS KANSAS

Overalls made from 65% polyester and 35% cotton, with soft nap on reverse side.

Supplier: MACHEREY-NAGEL

NUCLEODUR® C18 Isis is a specially crosslinked octadecyl modified silica phase for HPLC with multi-endcapping.

Supplier: bimos

Neon supports the forward leaning sitting position that is often necessary in lab work. Its modern design matches the high-tech laboratory environment perfectly and has all the characteristics you would expect of a good laboratory chair. It is seamless, easy to clean, washable, and resistant to disinfectants making Neon the ideal solution for the laboratory when a really comfortable ergonomic chair is needed.

Supplier: DUPERTHAL

Safety cabinets with storage shelves (CLASSIC line standard) or pull-out shelves (CLASSIC line pro) for the storage of hazardous substances in working spaces. Complete carcass, interior fittings and wing doors are made of powder-coated sheet steel.

Supplier: Sartorius

Minisart® NML with surfactant-free cellulose acetate (SFCA) is the best choice for all aqueous solutions and oils with a pH of 4 - 8. With a pore size of 0,2 µm that can be used for sterile filtration and has a male luer lock outlet. Only available in the EU/EEA and registered countries

Supplier: bimos

Neon supports the forward-leaning sitting position that is often necessary in lab work. Its modern design matches the high-tech laboratory environment perfectly and of course it has all the characteristics you would expect of a good laboratory chair. It is seamless, easy to clean, washable, and resistant to disinfectants. So, Neon is the ideal solution for the laboratory, when a really comfortable ergonomic chair is needed.

Supplier: VWR Collection

Agilent OpenLab CDS is the next generation chromatography data system, designed for ease of use and productivity. OpenLab CDS offers the most comprehensive instrument control and data acquisition for Hitachi HPLC and amino acid analysers. In addition, it supports an expanded array of instrumentation from other vendors, for example Agilent LC, GC and LC/MS. Whether you like to control a single instrument or a huge network of different analytical instruments, OpenLab CDS grows with your needs.

Supplier: LABCONCO

This HEPA-filtered glove box has inlet and outlet HEPA filters and provides a leak-tight physical barrier to protect the operator from hazardous airborne particulates and powders.

Supplier: GENLAB

A range of efficient, reliable, cost effective incubators ideal for biological analysis, research and general laboratory applications. The INC has a horizontal style with the controls fitted to one side of the door. All the models listed below feature an exterior of sheet steel, finished in an easy clean powder coated paint and a stainless steel inner chamber. Units are heated by means of Incoloy sheathed elements; positioned below the chamber floor for natural convection units and fitted around the fan on the back or side wall of the chamber for fan assisted units (200 L only).

Supplier: Thermo Orion

Use the Orion Star T930 ion titrator for dedicated ion titrations including salt in foods, chloride in drinking and wastewater, ammonia and Total Kjeldahl Nitrogen (TKN) of wastewater, surfactants in consumer products and total hardness of water.

Supplier: EUTECH

This waterproof tester is designed with advanced microprocessor technology to give you up to ±2 mV of accuracy across a wide measuring range. User-replaceable double-junction sensor with a wide platinum band provides highly accurate results even in wet and rugged environments. Ideal for measurements in electroplating rinse tanks, swimming pools, drinking water, waste water, chemical processing, cyanide destruction and chromate reduction.

Supplier: EUTECH

This water- and dust-proof tester is ideal for quick and accurate pH checks in pools and spas, aquariums and hydroponics operations, cooling towers, food processing water and process/wastewater. The double junction electrode makes the tester ideal for dirty water and solutions with heavy metals or contaminants, while increased reference gel volume offers significantly longer electrode life. Also suitable for educational purposes in schools.

Supplier: Corning

The robust organoid counting software package is designed to meet the unique needs of customers as 3D populations are known to vary in
morphologies dependent on numerous environmental factors or protocols.

Supplier: Thermo Fisher Scientific

The Thermo Scientific™ IntelliStack™ CO₂ Incubator shaker is a versatile laboratory instrument used for incubating and agitating samples simultaneously. It combines the functions of an incubator and shaker, providing a controlled environment for cell culture, microbial growth, and various other applications. With adjustable temperature, speed, and CO₂ concentration settings, it offers precise control over experimental conditions. A large, easy-to-use 10" colour touchscreen display with alarms, alerts, real-time monitoring of key parameters, and data logging with export via USB or Ethernet allows for easy operation.

Supplier: Ahlstrom-Munksjö

Ahlstrom-Munksjö’s qualitative grades of filter paper are recommended for use in analytical methods which determine or identify particulate constituents of a mixture irrespective of the amount present. Qualitative filter papers are often used in routine separation work that still requires high purity and consistent performance. These filter papers covers a wide range of laboratory applications, as liquids clarification, qualitative analytical separations for precipitates and buffers filtration, and are also used for soil analysis and in food and beverage testing. Standard qualitative filter papers are suitable for quadrant folded or gravity flow applications.

Supplier: FRISTADS KANSAS

Working trousers made of 65% polyester and 35% cotton, with mechanical stretch. Brushed inside.

Supplier: FRISTADS KANSAS

Work trousers made from 65% polyester and 35% cotton, in a luxury fabric. With rubber-free, elastic straps and adjustable waist.

Supplier: GA

Permanent cryogenic laser labels for long-term storage in liquid phase and vapor phase liquid nitrogen (−196 °C), lab freezers (−80 °C), and on dry ice. Supplied in A4 sheet format for printing in standard desktop laser printers, these cryogenic labels do not jam printers and withstand UV and gamma irradiation.

Supplier: MACHEREY-NAGEL

NUCLEODUR® C18 ec is a medium density monomeric octadecyl modified silica phase for HPLC.

Supplier: TOSOH BIOSCIENCE

SkillPak™ BIO pre-packed columns are designed for a fast method development and scale-up of multi-column chromatography (MCC) or continuous chromatography processes. They are pre-packed with TOYOPEARL® process chromatography media for bioseparations.

Supplier: Whatman products (Cytiva)

Whatman chromatography papers are widely used across the world, reflecting their purity, high quality and consistency. They are made from specially selected cotton cellulose and rigorously quality controlled to ensure uniformity within the grade.