1256 Results for: "Cole Parmer"

Supplier: Cole Parmer

Designed for thorough end-over-end mixing of 1,5/2,0 ml microcentrifuge tubes. Four racks (included) can be held securely in the drum.

Supplier: Cole Parmer

Stainless steel, for use with choice of heads listed above.

Supplier: Cole Parmer

Shaker, Microplate Shaker, Tube holder

Supplier: Cole Parmer

Hybridisation bottles, Type: Stuart, PYREX® borosilicate glass, Ø×L: 40×260 mm

Supplier: Cole Parmer

The SI19 incubator is designed with laminar flow air circulation and a water tray to provide efficient and uniform heating whilst keeping the humidity high. These features make this equipment suitable for use with up to 24 microplates (48 if stacked in 2 layers) which may be difficult to incubate. An integral over-temperature protection system automatically tracks the set temperature and controls the heater in the event of a fault. Error codes are displayed if a fault has occurred or if the set temperature has been interrupted. Temperature fluctuation and variation ±0,5 °C.

Supplier: Cole Parmer

Designed for use with microtitre plates and microcentrifuge tubes. The aluminium tray is fitted with a specially designed mat that securely holds up to four microwell plates in place. High speed combined with a tiny orbit creates the vibrational shaking action required for mixing the very small volumes contained in the wells or in microcentrifuge tubes. Speed and time are easily set via the digital display.

Supplier: Cole Parmer

The compact SSM1 provides a smooth uniform circular motion, which is ideal for samples from 0,5 to 5 ml in multiwell plates, dishes and Petri dishes. For larger vessels, an optional accessory cradle system is available that can accommodate a variety of vessels including flasks, bottles or beakers via four rubber securing bars. It will hold up to 4×250 ml or 2×500 ml or 1×1000 ml Erlenmeyer flasks or bottles. Once set on the digital display, the shaking speed is effectively maintained even over long periods of time.

Supplier: Cole Parmer

Specifically designed to mix small volumes of liquid in a temperature-controlled environment.

Supplier: Cole Parmer

The SHM1 is a powerful, variable speed, handheld homogeniser. The high-speed, high-torque motor makes the unit ideal for most homogenising applications. During operation the rotor shaft, which is directly coupled to the motor, spins at up to 35000 rpm. The tube assembly that fits around the shaft remains static and as the rotor shaft spins, within the tube assembly, it creates a pumping action drawing the sample into the open end of the tube, or probe, and forcing it through the windows at the bottom of the tube assembly. This shearing action reduces the particle size of the sample.

Supplier: Cole Parmer

Shaker, Rocking/Rotating Shaker, stuart®

Supplier: Cole Parmer

Stainless steel.

Supplier: Cole Parmer

Shaker, Vortex Mixer, stuart®, Accessory kit (only for SA8), containing 1× plastic cradle for standard microtitre plate, 1× circular foam insert for beakers and flasks up to 500 ml, 1× rectangular foam insert (holds 8×0.2 ml, 8×0.5 ml and 16×1.5/2.0 ml microcentrifuge tubes) and 1× solid rectangular foam insert for custom drilling.

Supplier: Cole Parmer

No more reading glass thermometers.

Supplier: Cole Parmer

Shaker, Rocking/Rotating Shaker, stuart®

Supplier: Cole Parmer

Stand holder for probe

Supplier: Cole Parmer

Mini vortex mixer with a vigorous mixing action is ideal for re-suspension of cells and pellets. It is a simple device, commonly used in laboratories to mix small vials of liquid, such as reagents of an assay.

Supplier: Cole Parmer

Save money by conserving reagents.

Supplier: Cole Parmer

Reduce drying time and contain spilled liquids with this chemical resistant containment tray. Holds one ¹/₄ L of spilled liquid. Easy to clean simply lift off the white grid and empty.

Supplier: Cole Parmer

Impervious to chemical attack, even concentrated acids.

Supplier: Cole Parmer

Battery operated, ideal for use almost anywhere.

Supplier: Cole Parmer

Compact, powerful, and programmable microcentrifuge.

Supplier: Cole Parmer

Shaker and incubator combination makes these devices ideal for cell culture procedures.

Supplier: Cole Parmer

Powerful magnets for strong magnetic coupling.

Supplier: Cole Parmer

Versatile - features both rotisserie and rocking motions.

Supplier: Cole Parmer

Strong stirring and precise heating for large-volume requirements.

Supplier: Cole Parmer

Spirit filled thermometer, 0 to 250 °C, 0...250 °C, For: Compatible with melting point apparatus 03013-61

Supplier: Cole Parmer

Pyrex® bottle, amber glass, 1000 ml, GL 45, stuart®, For: Pressmatic® R bottle top dispensers

Supplier: Cole Parmer

Electronic temperature controller for CC162 and SC162 magnetic hotplate stirrers.

Supplier: Cole Parmer

The all glass construction and silica sheathed heating element ensure exceptionally high quality pyrogen-free distillate (although distillate should be tested). Fitted with two independent thermostats to prevent overheating in the event of cooling water supply failure; one is mounted in the condenser vent tube to quickly detect water supply failure and the second is mounted inside the boiler. Either will turn off the heater if the water supply becomes too Low. The second thermostat also acts as a backup to the first for extra security. As there is no metal in contact with the water, the Distinction D4000 eliminates the risk of metal ions Leeching out into the water causing contamination to the distillate. The unit is also fitted with a Level control device that will automatically turn off the heater when the reservoir is full. This allows the still to run unattended without risk of the reservoir overflowing.

Supplier: Cole Parmer

Shaker, Rocking/Rotating Shaker