11389 Results for: "Adhesion+Testers"

Supplier: Industrial Physics

Mandrels, For: SP1822, Mandrel, 3/4"

Supplier: 3M

The Scotch-Weld™ EPX manual applicator is designed to process 38 ml to 50 ml cartridges. With the EPX system, the adhesive is dosed, mixed and applied to the materials to be bonded.

Supplier: DOW CORNING

A grease-like silicone material, thickened with heat conductive metal oxides.

Supplier: VWR Collection

30 or 60 layer adhesive entrance mats manufactured from low density polyethylene. These mats control contamination by removing debris from the soles of shoes, and the wheels of transport containers. When one layer is dirty, simply remove by the numbered corner tab, leaving a fresh layer ready for use.

Supplier: Industrial Physics

Taber H18 wheels

Supplier: 3M

4300 contamination control mats consist of 40 layers of adhesive-coated clear polyethylene sheets attached to a vinyl backing. For use at cleanroom entrances, hospitals, semi-conductor, medical device, pharmaceutical, biological and nuclear industries, also at factory to office entrances and other work areas requiring high levels of cleanliness.

Supplier: PURUS

A choice of either 30 or 60 layer adhesive entrance mats are manufactured from low density polyethylene. The mats control contamination by removing debris from the soles of shoes and the wheels of transport containers. When one layer is dirty, simply remove by the numbered corner tab, leaving a fresh layer ready for use.

Supplier: NEW PIG

Prevent slips, trips and falls in high traffic areas with our easy to clean, adhesive backed commercial floor mat.

Supplier: Texwipe

Adhesive coated contamination control mats capture particulates from foot traffic and equipment wheels, providing the most effective dirt and dust removal method available in a mat.

Supplier: VWR Collection

Silane (aminoalkylsilane) coating provide permanent adhesion, which can bind tissue sections to glass slides with a sticky surface.

Supplier: Industrial Physics

This Karsten tube penetration test is a simple test for measuring the degree or water penetration into building materials such as concrete, stone and plaster. The test kit consists of a glass tube filled with water, bonded to the test material with plastiline. Water pressure is then exerted on the surface. A graduated scale indicates, over time, the amount or water penetrated into the surface.

Supplier: Industrial Physics

This coating thickness gauge uses automatic magnetic and eddy current principles.

Supplier: Industrial Physics

This inspection gauge is a destructive precision tool for inspection and thickness measurement, on single or multiple coats, on virtually all substrates, including wood, plastics, metals.

Supplier: GREEFF RW SILICONES LUBRICAN

Non-flowing adhesive, high tensile strength and elongation, enhanced thermal stability, MIL-A-46146

Supplier: Thermo Fisher Scientific

A conductive epoxy which bonds well to metal, ceramics, plastics, glass and graphite
Expiration date provided

Supplier: Nitritex

Supatac™ Access Mats are made from LDPE with Polyacrylate adhesive and consist of 30 sheets. They prevent contamination and particulate matter from entering controlled and critical working environments. Manufactured with an anti-bacterial finish, they represent the most advanced technology for significantly reducing the level of traffic-borne contaminants.

Supplier: VWR Collection

Silane coated (aminoalkylsilane) glass slides producing a sticky surface, which can bind tissue sections to glass.

Supplier: Industrial Physics

This linear wear resistance tester is designed to test virtually any size or shape specimen. Ideal for testing material properties of contoured surfaces and finished products.

Supplier: ERGOMAT

Ergomat Sticky Mats provide a fast, convenient, reliable way to clean shoe soles, or other items, before entering a clean and sanitary area. They significantly reduce traffic-borne contaminants, and have proven themselves effective in a wide variety of industries, such as microelectronics, aerospace, pharmaceuticals and food processing. These disposable sticky mats consist of a stack of tear-off polyethylene films (full adhesive sheets) that effectively capture dirt and dust.

Supplier: PerkinElmer

Calibration supplies for DMA 8000.

Supplier: Industrial Physics

Quality steel set of feeler gauges.

Supplier: Industrial Physics

Equipment developed to measure the resistivity of paints, varnishes and liquids in a fast and precise way. Indispensable for the correct functioning of electrostatic paint installations.

Supplier: Industrial Physics

The quality of pretreatment prior to application of the coating is essential to the quality of the coating. This pretreatment set is designed for all the parameters during the pretreatment of steel prior to painting.

Supplier: Industrial Physics

The Colorbox is used to provide the illumination conditions for any visual inspection at a 45° angle.

Supplier: Industrial Physics

Hammer used to test the quality of concrete, as well as other construction materials, for analysing resistance.

Supplier: Industrial Physics

These thickness gauges are designed for the measurement of coatings of painting, enamel, galvanizing, metalising and plating on steel.

Supplier: Industrial Physics

This replica tape is specifically designed to measure blasted surfaces. By placing the Tqc replica tape on the surface and rubbing over it, the Rt (total roughness) or peak-to-valley height of the profile can be taken and measured.

Supplier: Industrial Physics

Dust test kit allows assessment of the quantity and size of dust particles on surfaces prepared for painting.

Supplier: Industrial Physics

Hexagonal/octagonal precision measuring comb made of heavy stainless steel - The high-grade stainless steel will not be affected by acid or base elements.

Supplier: VWR Collection

These linen testers are widely used in industrial electronics and laboratories, as well as for photography.