7792 Results for: "3-Chlorobenzophenone&view=easy"

Supplier: Biosensis

Fluoro-Jade stain is a fluorochrome derived from fluorescein, and is commonly used in neuroscience disciplines to label degenerating neurons in ex vivo tissue of the central nervous system.

Supplier: Portwest

Eco-conscious high visibility fleece jacket offers great wearer warmth and comfort. Using 100% recycled polyester, with a high-quality, anti-pill finish maintaining the look of the garment for longer.

Supplier: OHAUS

These multi-tube vortexers are ideal for high throughput sample processing. Interchangeable foam racks for vortexing tubes with diameters from 10 to 29 mm are available. Vortexing action is created by securing the top of the sample in place while allowing the bottom to rotate freely in a 3,6 mm orbit.

Supplier: Thermo Fisher Scientific

myImageAnalysis™ Software is a full-featured, multifunction computer program to analyze and edit digital images of electrophoresis gels and blots that were acquired using gel documentation imagers or scanners.

Supplier: Portwest

Contemporary cut jacket has a sporty fit and is 3-in-1 totally waterproof, windproof and breathable with taped seams. The dual-fabric outer shell has Oxford reinforced panels for additional durability.

Supplier: Retsch GmbH

The SR 300 mill is suitable for coarse and fine size reduction or de-agglomeration either in batches or continuously. It is a high throughput mill that can process soft and medium hard materials. The mill is used for applications in the environmental, chemical, pharmaceutical and agricultural sectors. The design includes a number of safety features such as an interlock on the quick action door that activates the motor brake, bringing the rotor to a halt in less than 0,5 seconds. It also features an access barrier and splash back protection in the hopper.

Supplier: Portwest

This two-tone jacket made from lightweight Sealtex™ Ultra fabric (high technology PU coated fabric on a flexible 100% polyester Tricot knit) offers breathability as well as waterproof and windproof protection. The attached hood and studded storm flap are great features in bad weather.

Supplier: IKA

Regardless of whether samples are hard, soft or fibrous this MultiDrive crusher can perform a wide range of crushing tasks involving coarse and fine crushing. MultiDrive basic is ideal to mix or grind the samples.

Supplier: Avantor Fluid Handling

Networking drives offer either native EtherNet/IP™ or Profibus communication-no additional hardware or firmware required.

Supplier: VWR Collection

The low profile 3-D rotator waver provides precise speed control and a smooth, low foaming, three dimensional, wave motion. The cast aluminium base offers durability and added stability, the spill resistant design channels fluids away from internal components. The microprocessor control provides electronic tilt angle adjustment which allows user to easily and accurately adjust waving angle from 0 to 20° while unit is operating. Precise speed control provides smooth, low speed waving motion down to 1 min⁻¹.

Supplier: VWR Collection

Designed for the preparation of buffers, tissue culture media, microbiological media and other biological fluids. These vacuum filtration systems feature large diameter high performance PES membranes for guaranteed performance and maximum throughput. The full assembly includes a filtration unit and a receiver bottle with an ergonomic shape, moulded finger grips and a patented bottle cap. The centrifuge tube and funnel system allows the user to filter fluids directly into a 15 or 50 ml tube.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: Corning

Corning® DeckWorks™ pipette tip system is designed to allow you to maximize storage space and help reduce the production and waste of plastic materials.

Supplier: Portwest

These overalls are perfect for the demands of the petrochemical industry. The highly technical fabric provides flame, heat, iron splash, chemical, electric arc and anti-static protection. The high collar and studded flaps on each pocket provide maximum protection.

Supplier: BioTool

PetriSwiss PS 20 fills 20 dishes directly in the PetriRack. There is no need for manual stacking or any other manual operations. It is ideal for production of small, special-purpose agar batches. The dishes are safely stacked in the PetriRack and can even be transported, chilled or incubated in the rack. The rack can also be fully autoclaved. The dishes can be taken continuously from the rack. All program data, parameters and operating states are displayed clearly and understandably on a graphic display. The unit is very operator-friendly and is operated using a state-of-the-art touch screen.

Supplier: Binder

With forced convection, the Avantgarde.Line heating and drying chambers offer quality and process reliability. The wide temperature range of up to 300 °C, mean these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ pre-heating chamber technology gives homogeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: IKA

Multi-position digital magnetic hotplate stirrers with 5, 10 or 15 stirring positions, designed for synchronous heating and stirring, suitable for continuous operation. The wear-free magnetic coils provide noiseless and consistent stirring at all positions. Screening can be performed under reproducible conditions. The surface temperature is infinitely adjustable up to 120 °C, producing a maximum medium temperature of 70 °C (depending on type of vessel). Speed remains constant, even when load changes.

Supplier: PEAK SCIENTIFIC

Peak scientific’s Solaris XE nitrogen generator offers a reliable, compressor-free gas solution that can comfortably meet the demands of most mass spectrometers within Waters’ portfolio of instruments. Using our tried and tested membrane technology, Solaris XE can operate with varying flow rates (up to 35 L/min of high purity nitrogen), purity (up to 99,5%) and outlet pressure can be adjusted down from 8 bar.

Supplier: Thermo Fisher Scientific

Thermo Scientific™ Pierce™ Quantitative Fluorescent Peptide Assay is a sensitive, mix-and-read fluorescent microplate assay for the quantitative measurement of peptides and peptide mixtures.

Supplier: IKA

The magic LAB® is a unique and multi-functional small-scale laboratory machine. It is designed for mixing, dispersing, wet milling and incorporation of powders into liquids. The magic LAB® is most frequently used for the development of new products or for optimizing of existing process techniques, particularly in the chemical, cosmetic, pharmaceutical and food industries.

Supplier: Portwest

The KX3 hooded softshell jackets is precision engineered using a revolutionary breathable, waterproof and windproof ripstop fabric.

Supplier: 3M

Premium performance 3M™ PTFE glass cloth tape 5453 has a brown woven glass cloth backing impregnated with PTFE (polytetrafluoroethylene). This tape provides a slick surface on process machinery and offers an extremely low coefficient of friction which, in combination with a pressure sensitive silicone adhesive, creates a non-stick surface that performs at elevated temperatures.

Supplier: MOLNLYCKE HEALTH CARE

These sterile cleanroom gloves with beaded cuffs and curved fingers are suitable for use in aseptic and Class 100 (ISO 5)/EU GMP Grade A environments. Recommended to be worn in combination with the Biogel® NeoTech Indicator® Underglove to form a Breach Indication System.

Supplier: Portwest

PW3 Hi-Vis baffle features HiVisTex Pro reflective tape for greater freedom of movement. The polyester ripstop outer combined with lightweight Insulatex thermal insulation offers an ultrasoft, water resistant solution for outdoor wear. Clever features include Ezee zip fastening and zipped pockets for secure storage.

Supplier: KARTELL

μAir™ technology ensures high precision, exceeding ISO 8655 standards, by minimising dead air space between the piston and liquid in the tip. This technology reduces the air compression and allows the user to achieve greater precision during laboratory practices.

Supplier: PHOENIX BIOMEDICAL

Clear PS. Ideal for colony counting.

Supplier: KARTELL

μAir™ technology ensures high precision, exceeding ISO 8655 standards, by minimizing dead air space between the piston and liquid in the tip. This technology reduces the air compression and allows the user to achieve greater precision during laboratory practices.

Supplier: KARTELL

μAir™ technology ensures high precision, exceeding ISO 8655 standards, by minimising dead air space between the piston and liquid in the tip. This technology reduces the air compression and allows the user to achieve greater precision during laboratory practices.

Supplier: Portwest

Designed for working in hazardous conditions both off-shore or on-site, this jacket combines style with performance. The special blend of FR polyester in the fabric provides unbeatable durability in the toughest conditions.

Supplier: Thermo Fisher Scientific

The T7 cell-free expression vectors (pT7CFE1) are cloning plasmids optimised for use with the Thermo Scientific™ 1-Step Human In Vitro Protein Expression System. They are used for the in vitro translation (IVT) of genes into functional proteins when used in combination with the 1-Step Human IVT system. The pT7CFE1 vector is available with single or tandem affinity tags at the N- or C- terminus to facilitate protein purification and detection. The pT7CFE vectors are suitable for insertion of cloned genes, cDNAs, ORFs or PCR products for in vitro transcription and translation.