- Description:LabTower RO 40
- Seq:02
- Environmentally Preferable:
- Model:LabTower RO 40
- Inorganics @ 25°C:>98% rejection
- Bacteria:>99%
- Feed water:Potable tap water (softened or hardness stabilised)
- Production flow rate:40 L/h
- Particles:>99%
- W×D×H:450×580×1500 mm
- Pk:1
This RO system with controller provides easy-to-read system parameters. Completely drainable, integrated 100 L high-purity water reservoir has a low-noise pressure booster as a standard component. The compact LabTower RO system is ideally suited as a feed water source for dishwashers, autoclaves and general laboratory use. It serves as a built-in pretreatment unit, consisting of a hardness stabilizer for protection of reverse osmosis module from hardness formers. An activated carbon/5 μm combi-cartridge protects the system against free chlorine and particles which ensures the long service life of downstream purification stages.
- Two system options with permeate flows of 20 or 40 L/h
- Stand-alone design with integrated 100 L tank takes up ZERO bench space
- Casters allow for easy relocation
- Developed to fulfill GLP requirements
- Recorded and traceable data can be obtained by print out via the RS232 interface
- Highly qualified and precise measurement of the conductivity is ensured by the cell constant of 1,6/mm
The system comes with an integrated 100 L reservoir made of high-purity polyethylene. Adjustable reservoir volume can be programmed for times of low demand. Resistivity/conductivity is clearly displayed on large back-lit control panel that tilts for optimum viewing. Status of current operating mode are clearly indicated as 'production', 'stand-by', or 'cleaning' modes. System parameters are code-protected to prevent accidental changes to set points.