You searched for: Electrophoresis Reagents

Supplier: PanReac AppliChem

The CheLuminate-HRP PicoDetect is a complete kit with ready to use reagents for chemiluminescent detection of immobilised proteins (Western blot) or immobilised nucleic acids (Southern or Northern blot), conjugated with horseradish peroxidase (HRP) directly or indirectly.

Supplier: Thermo Fisher Scientific

The Fast Western Blot Kits, SuperSignal™ West Dura provide reagents and protocol for reliable and rapid, 1 hour chemiluminescent Western blotting at femtogram levels of sensitivity. These complete Fast Western Blot Kits requires minimal hands on time and yield results comparable to classical Western blotting with SuperSignal™ West Dura Chemiluminescent Substrate. This substrate produces a signal that is detectable using photographic or other imaging methods. The developed blots can be repeatedly exposed and stripped of the primary antibody and reprobed. The complete kit contains all the reagents necessary to block and probe a Western blot with mouse or rabbit primary antibody.

Supplier: AAT BIOQUEST

ReadiUse™ 1 kb Plus DNA ladder is a ready-to-use DNA ladder, which is pre-mixed with loading dye for direct gel loading.

Supplier: AAT BIOQUEST

The Gelite™ 100 bp to 1 kb DNA ladder is designed to help size and estimate the mass of double-stranded DNA and PCR products within the 100 to 10000 base pair range on agarose or polyacrylamide gels.

Supplier: Thermo Fisher Scientific

For chemiluminecent HRP-based detection of western blotting systems. It is soluble in most polar organic solvents but is insoluble in water.

Supplier: G-Biosciences

The Apoptotic DNA Ladder Kit contains the reagents necessary for the preparation of cellular fractions for the production of apoptosis nucleosomal DNA ladders. The kit does not require toxic phenol and DNA ladder is prepared either with or without genomic DNA.

Supplier: EDVOTEK

20 µg for 20 gels.

Supplier: LONZA

Lonza SimplyLoad™ DNA ladders are ready to load directly onto the gel to maximise time and convenience. Each band has an ideal 50% G-C content for rapid, precise sizing and sharp resolution. Free from contaminating plasmid DNA so they have minimal background.

Supplier: AAT BIOQUEST

The Gelite™ 1 kb DNA ladder is designed for sizing and estimating the mass of double-stranded DNA and PCR products within the 250 to 10000 bp range on agarose or polyacrylamide gels.

Supplier: AAT BIOQUEST

The Gelite™ 100 bp DNA Ladder is designed for sizing and estimating the mass of double-stranded DNA and PCR products within the 100 to 1500 bp range on agarose or polyacrylamide gels.

Supplier: Cytiva

The appearance of streaks that distort 2-D electrophoresis maps is a common problem, occurring most frequently when running gels that contain regions greater than pH 7,0. Increased sample load, increased length of the IPG strip, or using a narrower pH gradient worsens the problem. Extra spots on 2-D gels, caused by non specific oxidation of proteins, is another difficulty encountered when running gels containing basic regions. Both streaking and non specific oxidation result in poorly resolved protein patterns and reduced reproducibility between electrophoresis runs.

Supplier: Cytiva

Amersham ECL Select is a high sensitivity reagent for chemiluminescent Western blotting detection.

Supplier: Cytiva

CypHer5E is a red-excitable, pH-sensitive cyanine dye derivative that is minimally fluorescent at a basic pH and maximally fluorescent at an acidic pH.

Supplier: Cytiva

Enhanced chemiluminescence (ECL) detection reagents for reliable detection of medium and high expression proteins.

Supplier: Cytiva

Cy™ fluorescent amidites for incorporation of Cy3, Cy3,5, Cy5, Cy5,5 fluorescent dyes at any position in an oligonucleotide during synthesis.

Supplier: Cytiva

Chemiluminescence detection reagent for detection of high to medium abundant proteins.

Supplier: Cytiva

Pharmalyte® carrier ampholytes, prepared by the co-polymerization of glycine, glycylglycine, amines and epichlorohydrin, are available in five broad-range and four narrow-range pH intervals.

Supplier: Cytiva

Amersham™ ECL™ Prime is a highly sensitive Western blotting detection reagent characterised by stable signal emission, allowing for the possibility of repeated exposures and making it easier to process several blots in the same experimental run. Amersham™ ECL™ Prime delivers a detection system that is sensitive, stable, precisely quantitative across a wide dynamic range of protein levels, and conservative in its consumption of expensive antibody reagents. The high performance of Amersham™ ECL™ Prime is due to the presence of an enhancer in the reagent, increasing enzyme turnover, and thereby significantly increasing both signal intensity and duration. The light signal is further intensified by the addition of a catalyst.

Supplier: Cytiva

Amersham ECL Blocking Agent is for blocking nitrocellulose and PVDF membranes to be used with Amersham ECL, Amersham ECL Prime and Amersham ECL Select Western Blotting Detection Reagents

Supplier: G-Biosciences

DNAmark™ 100 bp Plus ladder consists of 14 DNA fragments ranging in size from 100 to 3000 base pairs (bp). The 500 bp and 1200 bp fragment are present at increased intensity to allow easy identification. All fragments are precisely quantified and mixed during the production. For 5 µl loading, all fragments except 500 bp and 1200 bp are 40 ng. The 500 bp and 1200 bp fragment are 100 ng.

Supplier: G-Biosciences

DNAmark™ 100 bp ladder consists of 11 fragments ranging from 100 to 1500 base pairs (bp). The 500 bp fragment is present at increased intensity to allow easy identification. All fragments are precisely quantified and mixed during the production. For 5 µl loading, all fragments except 500 bp are 40 ng. The 500 bp fragment is 100 ng.

Supplier: G-Biosciences

DNAmark™ 500 bp ladder consists of 10 DNA fragments ranging from 500 bp to 5000 bp. The 2000 bp fragment is present at increased intensity to allow easy identification. All fragments are precisely quantified and mixed during the production. For 5 µl loading, all fragments except 2000 bp are 40 ng. The 2000 bp fragment is 100 ng.

Supplier: Cytiva

ECL Direct Nucleic Acid Labeling and Detection Systems are based on the direct labeling of DNA or RNA probes with horseradish peroxidase (HRP) in a simple 20 minute chemical reaction. The resulting probe can be used without purification. Detection is achieved by generation of light via the HRP-catalyzed breakdown of luminol.

Supplier: Thermo Fisher Scientific

From 250 to 5000 base pairs: 5 bands from 125 to 1000 bp; four bands from 1500 to 5000 bp. Recommended load volume 20 µl.

Supplier: Merck Millipore (Novagen)

PCR Molecular Size Marker contains a mixture of eight defined DNA fragments ranging from 50 to 2000 bp at convenient size intervals for characterising small DNA products. The markers are supplied in gel loading buffer containing two tracking dyes that do not interfere with UV illumination of ethidium bromide-stained bands. A separate vial of 6X Loading Buffer is included. Each vial of markers is sufficient for 50 lanes on TBE or TAE agarose stained with ethidium bromide. The recommended amount for loading (5 µl) produces bands of even intensity that are bright, sharp and easy to photograph.

Supplier: Thermo Fisher Scientific

DNA ladders are used in gel electrophoresis to determine the size and quantity of testing DNA fragments of genomic, plasmid, and PCR DNA. They are commonly used in the studies of plasmid DNA and PCR products.

Supplier: Cytiva

Amersham ECL Prime Blocking Reagent is blocking Amersham Protran NC and Amersham Hybond PVDF membranes used with Amersham ECL start, Amersham ECL, Amersham, ECL Prime, Amersham ECL Select and Amersham ECL Plex.

Supplier: Cytiva

ECL Direct Nucleic Acid Labeling and Detection Systems are based on the direct labeling of DNA or RNA probes with horseradish peroxidase (HRP) in a simple 20 minute chemical reaction. The resulting probe can be used without purification. Detection is achieved by generation of light via the HRP-catalyzed breakdown of luminol.

Supplier: Biotium

A visible three- colour protein marker for SDS-PAGE or western blotting, with 12 bands ranging from 8 to 245 kDa.

Supplier: Thermo Fisher Scientific

This wide range molecular weight marker contains 60 ng/μl of 21 fragments from 100 bp to 12000 bp. The bands appear in 100 bp increments from 100 to 1000 bp and in 1000 bp increments from 1 to 12 kb. Bands at 1 kb and 5 kb stain brighter to aid identification.