You searched for: Cleanroom Wipes

Supplier: VWR Collection

Polyester, sealed-edge wipe for use in ISO 3 cleanrooms.

Supplier: VWR Collection

These cleanroom wipes are made of polyester and cellulose.

Supplier: VWR Collection

Microfibre, sealed-edge wipe for use in ISO 3 cleanrooms.

Supplier: VWR Collection

Absorbent, non woven wipe for use in ISO 6 cleanrooms.

Supplier: VWR Collection

Double ply polyester sealed-edge wipe for use in ISO 5 cleanrooms.

Supplier: VWR Collection

Excellent for cleaning rough, abrasive, or irregular surfaces, yet soft enough for delicate surfaces. Appropriate for pharmaceutical and biotechnology industries.

Supplier: VWR Collection

2 ply polyester sealed-border wipe for use in ISO 3 cleanrooms.

Supplier: VWR Collection

Designed for cleaning laminar flow benches, cleanroom surfaces, quartzware and general process equipment. Appropriate for electronics, pharmaceutical, biotechnology, chemical and petroleum, environmental and education industries. Non textured.

Supplier: VWR Collection

These wipes are made from 100% continuous filament, double-ply, ultrasonically-sealed polyester to provide better absorbency.

Supplier: VWR Collection

Polyester wipe for use in ISO 4 cleanrooms.

Supplier: VWR Collection

These are 100% continuous-filament, double-knit polyester fabric wipes.

Supplier: VWR Collection

Polyester, sealed-border wipes for use in ISO 3 cleanrooms.

Supplier: VWR Collection

These wipes are made from 100% continuous filament, double-ply, ultrasonically-sealed polyester to provide better absorbency. The wipe's size is perfectly suitable for usage on a mop frame for floor, ceiling and wall cleaning.

Supplier: VWR Collection

These wipes are made from double-woven polyester fabric, with close-cut edges, and are washed in an ISO Class 4 cleanroom to minimise contamination by particles and extractables.

Supplier: VWR Collection

These non woven wipes, made from 45% polyester and 55% cellulose, are designed for cleaning laminar flow benches, cleanroom surfaces and general process equipment. The wipe is pre-saturated with semiconductor grade solvent (70% IPA/30% DIW) for safe storage, mixing and dispensing.

Supplier: VWR Collection

Ideal for cleaning rough or uneven surfaces, yet still soft enough for use on sensitive surfaces. Use these 100% double-knit, polyester wipes where minimum particle and fibre contamination is essential.

Supplier: PGI NONWOVEN

These wipes are ideal for use in critical production processes, such as semi-conductors, pharmaceuticals, biotechnology and all other environments where contamination is a possibility.

Supplier: CONTEC

Polynit wipes are made of 100% knitted textured polyester with knife cut edges for a very soft wipe.

Supplier: CONTEC

Recycled 100% knitted polyester cleanroom wipes, providing a sustainability story in a single-use world.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with sealed edges.

Supplier: CONTEC

100% rayon non woven wipes for cleaning high-temperature process equipment.

Supplier: CONTEC

Absorbent, non woven cellulose/polyester wipes, feature enhanced sorbency while being economical due to their light weight.

Supplier: CONTEC

These absorbent non abrasive wipes consist of long staple cellulosic fibres which are wet laid in a paper making process to form an extremely clean sheet.

Supplier: CONTEC

Pre-saturated knitted polyester wipes made with Polynit Heatseal material. The wipes are pre-saturated with 70% IPA and 30% DI Water. They are therefore ideal for cleanroom applications, surface preparation and critical manufacturing processes.

Supplier: CONTEC

Amplitude™ Lambda™ wipes are made from hydroentangled blend of 58% cellulose and 42% polyester. This hydroentangled fabric provides low levels of particles and extractables.

Supplier: CONTEC

Ideal for wiping exterior surfaces of products and cleaning interior surfaces of process tools or other equipment. Made from 100% textured polyester no-run knit.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with sealed edges and increased sorbency.

Supplier: CONTEC

SATWIPES® Sigma™ consists of a perforated roll of saturated wipes which are dispensed through a center-pull canister. The wipes are made of 55% cellulose and 45% polyester presaturated with IPA and DI water.

Supplier: CONTEC

100% interlock knit lightweight polyester wipes with sealed edges.

Supplier: CONTEC

Hydroentangled split microfibre wipes pre-saturated with 70% IPA and 30% DI water.