Supplier: Avantor

These filters are made from 100% PEEK.

Supplier: Avantor

These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.

Supplier: Avantor

The Last Drop™ eluent filter utilises a flat element, which sits parallel to the bottom of the reservoir, allowing the filter to draw all but the last 2% of the eluent without drawing air into the system. The filter consists of a 316 stainless steel or PTFE filter element in an inert housing.

Supplier: Bohlender

Filter candle made of porous PE.

Supplier: ROBU GLASFILTER

This solvent filter is made of pure borosilicate glass.

Supplier: ROBU GLASFILTER

These filters are suitable for degassing and filtration of solvents e.g. in chromatography.

Supplier: Bohlender

Suction Filter with PTFE membrane.

Supplier: Bohlender

These PTFE suction filters consist of a receiver with a female thread and an easily exchangeable frit. They are ideal prefilters in front of pump systems for protecting gaskets, pistons or column packings against premature wearing due to contaminations.

Supplier: IDEX RHEODYNE

Inlet filters are used to extract particles from the sample between the injector and the column.

Supplier: Sartorius

The arium® CellPlus is a sterile packed, point-of-use ultrafilter for efficient removal of endotoxins, RNase, DNase, microorganisms and particles. Retrograde contamination is prevented by the protective bell design made up of polycarbonate. It offers high safety for critical cell culture applications.

Supplier: MICROSOLV

Biocompatible, last drop, PEEK and polypropylene mobile phase filters. PTFE filter element and will provide very high filter capacity and throughput while using a maximum amount of solvent. The unique design allows for this flat filter to vacuum up to the last drop of liquid in the reservoir bottle.

Supplier: PerkinElmer

Solvent reservoir sparger, Titanium, Pore size: 10 µm

Supplier: Agilent

It prevents the formation of spurious peaks within the detector due to solvent outgassing at the low-pressure end of the chromatograph.

Supplier: VARIAN

This mobile phase inlet filter operates up to 500 °C and is compatible with halogenated solvents.

Supplier: VICI JOUR RESEARCH

This safety air outlet filter regulates the pressure during helium sparging.

Supplier: UPCHURCH SCIENTIFIC

Stainless steel, PEEK or UHMWPE

Supplier: VICI JOUR RESEARCH

With flat filter element which allows the maximum amount of mobile phase to be drawn from the reservoir without introducing air into the system.

Supplier: VICI JOUR RESEARCH

The No-Met polyethylene filter is designed for applications involving the separation of biomolecules, with inert polymeric fittings for 1/8" tubing and a 20 µm filter effectively eliminating metal contamination from the fluid path.

Supplier: VICI JOUR RESEARCH

The air inlet valve has a check valve which blocks vapours of the solution in a bottle, preventing the vapours from escaping into the lab. The safety air outlet filter regulates the pressure during helium sparging.

Supplier: UPCHURCH SCIENTIFIC

Thes filters with stems are 100% 316 stainless steel. Filters with threaded fittings have threaded Kel-F® (PCTFE) caps.

Supplier: VICI JOUR RESEARCH

These filters made from stainless steel 316L protect HPLC systems from small particles in the mobile phase.

Supplier: Mettler - Toledo

EasyFrit turns EasySampler into a selective solution phase sampling tool for data-rich collection throughout a controlled crystallisation.

Supplier: VICI JOUR RESEARCH

The Last Drop filter/sparger combines filtration and sparging in a single unit. The PTFE housing contains a mobile phase filter with either a stainless steel or PTFE filter element. Connect the solvent line to the stepped connector, which accommodates 1,5, 2,2, and 3,5 mm ID tubing. A 1/4"-28 fitting connector connects a 1/8" helium line connects to the 10 µm sparger. Both connectors are PEEK.