You searched for: Ovens

Supplier: Binder

With forced convection and enhanced timer functions, the Avantgarde.Line heating and drying chambers offer quality and process reliability. With a wide temperature range up to 300 °C, these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ preheating chamber technology gives homegeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: Binder

With natural convection, Avantgarde.Line heating and drying chambers offer quality and process reliability. With a wide temperature range up to 300 °C, these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. APT.line™ pre-heating chamber technology gives homegeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. These units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: Thermo Fisher Scientific

Heating and drying ovens with stainless steel chambers, which are designed for routine applications. Units with natural convection are ideal for gentle drying and heating, to protect delicate samples. Units with forced convection are suitable for faster drying and heating, and superior temperature uniformity.

Supplier: Thermo Fisher Scientific

Heratherm™ large capacity ovens were designed for larger samples or high sample volume. All models have a large, easy to view, vacuum fluorescence display and simple to use touch button operation which is controlled by a microprocessor and automatic over-temperature alarm system to protect samples. All units are available in convenient 230 V version - no special connection required.

Supplier: Thermo Fisher Scientific

Heating and drying ovens with coated or stainless steel exterior (SS models). The timer allows the oven to be turned on or off after a pre-set time, with a choice between weekly, hourly or real time settings. Units with natural convection are ideal for gentle drying and heating, to protect delicate samples. Units with forced convection have adjustable fan speed and are suitable for faster drying and heating, and offer superior temperature uniformity.

Supplier: UVP ULTRA VIOLET PRODUCTS

The ultimate oven for multiple motion options, the Multidizer oven comes with both a rotary wheel (in the lower chamber) and a reciprocating shaker tray (in the upper chamber). It also offers a rocker tray and/or orbital motion tray as options. These are to accommodate different containers and usages. The lower chamber of the unit is the same as for the HB-1000 and operates independently of the top chamber.

Supplier: Thermo Fisher Scientific

Heating and drying ovens with coated or stainless steel exterior. The timer allows the oven to be turned on or off after a preset time, with a choice between weekly, hourly or real time settings. Units with natural convection are ideal for gentle drying and heating, to protect delicate samples. Units with forced convection have adjustable fan speed and are suitable for faster drying and heating, and superior temperature uniformity.

Supplier: Thermo Scientific

Vacuum drying ovens with stainless steel chambers, vacuum fittings, tubing and ball valve. Units are designed for gentle drying of heat-sensitive samples and have adjustable temperature limit protection, protection Class 2 (DIN 12880, Part 1).

Supplier: Thermo Fisher Scientific

Lindberg/Blue M Moldatherm box furnaces are versatile selection for a variety of industrial and laboratory applications.

Supplier: Thermo Fisher Scientific

Thermolyne™ muffle furnaces offer heating solutions for a number of application needs, from general laboratory use to industrial applications. Units are ideal for fast heat up and temperature control up to 1200 °C. The furnaces are used for chemical analysis, materials testing, determination of volatiles in waste water treatment plants, industrial plants, pharmaceutical and cosmetic companies, environmental laboratories, agriculture laboratories and paper manufacturers.

Supplier: BOEKEL SCIENTIFIC

RapidFISH slide hybridisation oven was designed to simplify fluorescent in-situ hybridisations procedures for FFP samples, cell suspensions, and other tissue preparation procedures.

Supplier: BOEKEL SCIENTIFIC

Hybridisation and wash methods vary according to application and personal choice. Boekel Scientific offers a range of hybridisation incubators with features that include digital display for ease and reproducibility of temperature setting; microprocessor or proportional temperature control; rapid heat-up, optimised heater power and natural or forced air convection.

Supplier: Cole-Parmer

Use and recover volumes as low as 5 ml, ensuring preservation of precious samples.

Supplier: Thermo Scientific

The LUT ovens are designed for drying paint and other coatings where solvents in the air can form explosive atmospheres, where there is a restriction on the maximum quantity of solvent*. The LUT 6050 F is for installation in areas subject to fire hazards, e.g. where laquers are handled. The inner chamber and all fittings are made of 1,4301 stainless steel, and insulating materials are free of surface active substances (no silicone is used). The formation of vapour pockets is avoided by a well directed air supply system, fresh air is filtered and pre-heated before it enters the chamber, a radial fan ensures the heated fresh air and solvent vapours mix efficiently.

Supplier: NABERTHERM

Ovens that are designed for drying and evaporation of solvent-containing materials. Furnace based technology utilised for ovens, units have a 1.4301 (DIN) stainless steel chamber, which is rust-resistant and easy to clean, they feature horizontal forced convection.

Supplier: Cole Parmer

Versatile - features both rotisserie and rocking motions.

Supplier: BOEKEL SCIENTIFIC

The Shake ‘N’ Bake hybridisation oven is ideal for hybridising and pre hybridising membranes used in Southern and Northern blotting techniques. The gentle rocking motion provides washes that are less messy than a shaking water bath and more convenient than a shaker inside a conventional incubator. The small footprint conserves valuable bench space.

Supplier: GENLAB

Reliable, efficient, general purpose ovens, to suit most drying, warming and general laboratory applications. These units from Genlab have a sheet steel exterior finished with an easy to clean powder coated paint. The interior chamber is made from mild steel coated with aluminium (CLAD). They are heated via Incoloy sheathed elements fitted around the fan on the rear of the chamber. Ovens have fixed shelf runners and removable chrome plated wire grid shelves. The top vent is fitted with a clip to hold a glass immersion thermometer.

Supplier: GENLAB

A range of efficient, reliable, cost effective ovens ideal for most drying, warming and general laboratory applications. The exterior is sheet steel finished in an easy-to-clean powder coated paint and the inner chamber is made from mild steel coated with aluminium (CLAD). The top vent is fitted with a clip to hold a mercury-in-glass thermometer. Heated by means of Incoloy sheathed elements; positioned below the chamber floor for natural convection units and fitted around the fan on the back or side wall of the chamber for mechanical convection units. The control system comprises of a direct reading thermostat and over-temperature thermostat both with calibrated scales and tamper-proof locks. They also include an illuminated mains switch with heat and overheat indicators.

Supplier: GENLAB

Genlab Premier ovens (PRO) are a range of efficient, reliable, cost effective units to suit the majority of drying, warming and general laboratory applications.

Supplier: GENLAB

A range of efficient, reliable, cost effective ovens ideal for most drying, warming and general laboratory applications. The exterior is sheet steel finished in an easy-to-clean powder coated paint and the inner chamber is made from mild steel coated with aluminium (CLAD). The top vent is fitted with a clip to hold a mercury-in-glass thermometer. Heated by means of Incoloy sheathed elements; positioned below the chamber floor for natural convection units and fitted around the fan on the back or side wall of the chamber for mechanical convection units. The control system comprises of a direct reading thermostat and over-temperature thermostat both with calibrated scales and tamper-proof locks. They also include an illuminated mains switch with heat and overheat indicators.

Supplier: LTE SCIENTIFIC

Range of ovens with choice of either natural convection or forced convection by means of a fan. U (Uni-program) models offer single temperature selection/control at the push of a button. Following a mains power failure, the controller will automatically re-start. M (Multi-program) models will allow up to eight multiple-step cycles to be stored in the memory. Selectable temperature ramping function allows controlled temperature rates to be programmed into a cycle, repeated for a specified number of times or held continuously until interrupted. Following a mains power failure, recovery options include cycle hold, start cycle from the beginning or re start cycle from point of interruption.

Supplier: LTE SCIENTIFIC

Oven, Large Capacity, Swallow™ 480, Capacity: 480 L, Convection type: Forced convection, Temperature range: 40…250 °C, Temperature fluctuation (time): ±0,2 °C, Temperature variation (spatial): ±4,0 °C, Max. load per shelf: ~15-20 kg, Shelves supplied (max.): 3 (19), Int. W×D×H: 720×670×1000 mm, Ext. W×D×H: 870×865×1270 mm

Supplier: LTE SCIENTIFIC

Oven

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Stainless steel exterior and interior.

Supplier: NABERTHERM

These compact tube furnaces with a SiC rod heating and integrated switchgear with controller can be used universally for many processes. They represent an inexpensive variant in the high-temperature range. The standard mounting options for accessories make them flexible for use in a wide range of applications.

Supplier: NABERTHERM

These compact bench top tube furnaces with integrated controllers can be widely used for a variety of processes. Equipped with a standard C 530 ceramic working tube and two fibre plugs they have an unbeatable price/performance ratio. Units feature rust-free, textured stainless steel exteriors. R models feature Tmax 1200 or 1300 °C, RD models have Tmax 1100 or 1300 °C.

Supplier: NABERTHERM

These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, make these tube furnaces suitable for integration into existing process systems.

Supplier: GENLAB

These Genlab drying cabinets are suitable for general purpose warming applications and drying glassware or instruments. Made from sheet steel finished in an easy to clean powder coated paint. Fitted with adjustable shelf runners, removable plated wire grid shelves and ventilation holes. Insulated models (IWC) give energy savings of over 30% compared to the non-insulated range (DC). Heated by Incoloy sheathed elements in the base of the unit. The 500 and 1000 litre models have fan assistance as standard. All units have toughened glass doors; 125 and 250 litre models have sliding doors and the 500 and 1000 litre models have hinged doors. Units are controlled via a direct reading thermostat with calibrated scale and tamper-proof lock. The units also have an illuminated mains switch with heat indicator.

Supplier: GENLAB

These Genlab E3 drying cabinets are suitable for general purpose warming applications and drying glassware or instruments. All models in this range are fully insulated for improved efficiency and energy savings.