You searched for: Electrophoresis Systems

Supplier: EDVOTEK

Six groups of students can load their own individual gels and the six gels can be run together in 30 to 40 minutes. No need for gel taping and gels can be poured quickly and easily using the gel tray sealing rubber end caps.

Supplier: EKSIGENT

he dsDNA 1000 Kit is designed for use on the PA 800 Plus and contains the supplies necessary to perform a high-performance separation and analysis of double-stranded DNA (dsDNA) fragments.

Supplier: Genscript

GenBox Gel electrophoresis system is designed to run 1 or 2 mini gels at the same time. GenBox mini tank is designed for ultimate convenience and consistent performance compared to traditional electrophoresis tanks. Discover the versatile and easy to use GenBox mini tank for your gel electrophoresis and blotting needs.

Supplier: Agilent

Capillary electrophoresis system (CE), accessory, Spare part, Capillary tubing cutter

Supplier: Agilent

Alignment interfaces are an integral part of the Agilent diode-array detection (DAD) system. These interfaces contain optical slits which are precisely matched to the capillary inner diameter for optimised sensitivity and linear detection range.

Supplier: Agilent

CE/MS sprayer kit and CE/MS adapter kit to couple an Agilent CE instrument with an MS system.

Supplier: Alpha Laboratories

A large selection of combs are available for all of our Clarit-E electrophoresis gel tanks. Selecting the right comb or combination of combs enables you to tailor the system to your precise requirements.

Supplier: Agilent

PVA coated capillaries contain a permanently adsorbed layer of polyvinyl alcohol. This coating minimises hydrophobic and electrostatic solute/wall interactions and eliminates electroosmotic flow (EOF). Using a proprietary deposition process, the PVA coating is stable over a wide pHrange, even under basic conditions from 2,5 to 9,5. This stability allows the use of many common CE buffers. Because the silica surface is covered, many proteins and amines can be analysed without the peak tailing found with uncoated capillaries. In addition, since EOF is eliminated, cumbersome washing procedures are unnecessary and migration time reproducibility may be improved.

Supplier: Agilent

Universal Bare Fused-Silica Capillaries have a window, 750 mm effective length and 363 μm Ext.Ø, fitting into any CE instrument.

Supplier: Agilent

CEP coated capillaries contain a permanently bonded polymer coating. This CEP coating shields the silanol functionality of the capillary surface and helps prevent sample adsorption. Additionally, EOF is nearly eliminated, making the capillary ideal for applications such as DNA separations with sieving polymer buffers.

Supplier: Agilent

Pre-aligned fused-silica capillaries from Agilent Technologies are designed and optimised for ease of use and reliability. All capillary ends are cut to a smooth, mirror-like finish. In addition, the polyimide outer coating is removed from the ends. These processes ensure minimal sample adsorption and help maintain sharp peak shapes. All capillaries have a pre-made detection 'window' and a built-in alignment stopper that allows rapid and precise insertion in the alignment interface.

Supplier: Agilent

Capillary electrochromatography is a hybrid of CE and LC and can be performed in the Agilent CE system. Using CE capillaries packed with LC stationary phases, CEC offers the loadability and selectivity of LC and the high efficiency of CE.

Supplier: Agilent

These fused silica capillaries are designed to analyte mixtures are separated and the components detected via UV-Vis absorption, allowing preliminary identification based on peak elution time and UV-Vis spectra or both, when compared to a standard.

Supplier: Agilent

µSIL-WAX capillaries with windows, featuring a modified, polyethylene oxide, hydrophilic coating.

Supplier: Agilent

A series of coated capillaries specifically designed for CE, which are prepared by cross-linking and bonding a novel, proprietary fluorocarbon (FC) polymer. μSIL-FC capillaries are chemically inert, hydrophobic, and stable from pH 2,5 to 10.

Supplier: CLEAVER SCIENTIFIC

The multiSUB midi is designed for routine horizontal gel electrophoresis. Simply with the extended width it allows more samples to be resolved per gel than the multiSUB mini, without a significant increase in buffer or gel volumes. Two tray options are available: 70×100 mm and 100×100 mm, and combs ranging from preparative up to 16 samples.

Supplier: Agilent

Agilent Technologies extended light path capillaries ('bubble' cell capillaries) can be used to improve sensitivity 3- to 5-fold over standard capillaries. With extended light path capillaries, the inner diameter is increased only at the detection window, offering the sensitivity of a wide inner diameter capillary and the low current generation of a narrow one.

Supplier: Roth Carl

Vertical gel electrophoresis system, Vertical dual plate electrophoresis, Mini vertical dual plate, Coolable, 200×140 mm, Capacity: 20 gels