Supplier: SHERWOOD SCIENTIFIC INSTRUMENT

Measurements of salt concentration (sodium chloride) are required throughout the food industry (dairy products, frozen goods, salted meats, beverages, etc) as well as in clinical situations.

Supplier: Agilent

This full-range meter measures conductivity, resistivity, total dissolved solid (TDS), salinity, and present solution temperature. Ideal for use in environmental, petrochemical, biological and food applications.

Supplier: Testo

The testo 206 series is ideal for pH measurements in liquid and semi-solid media. The instruments offer a combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free and insensitive to dirt.

Supplier: Cole-Parmer

3505: Simple to use laboratory pH/mV/°C meter for use in general purpose and educational applications. It utilises rotary controls for mode selection and pH calibration. A novel design feature ensures that inadvertent movement of the calibration controls has no effect during sample measurement.

Supplier: BEHR

Conductivity meter with connection hoses for water deionisers B10dN, B22dN, B45dN.

Supplier: HORIBA

These waterproof pocket meters directly measure calcium, potassium or sodium concentrations in 0,3 ml sample (or 0,05 ml sample with sampling sheet B). The unique flat sensor allows measurement of viscous liquids, solids, and even powder samples. The sensor does not need to be dipped into the sample, a few drops are sufficient.

Supplier: Thermo Orion

This resistor calibration kit can be used to verify the performance of Thermo Scientific™ Orion™ Versa Star conductivity meters, Thermo Scientific™ Orion™ Star A series conductivity meters and legacy Orion™ Star series conductivity meters.

Supplier: HORIBA

This waterproof meter features a unique flat sensor that enables quick, accurate and direct measurements of micro samples as small as 0,12 ml. The sensor does not need to be dipped into the sample, a few drops are sufficient.

Supplier: HORIBA

These pocket meters directly measure nitrate ion and nirate-nitrogen concentrations in 0,3 ml sample (or 0,05 ml sample with sampling sheet B). The unique flat sensor allows measurement of viscous liquids, solids, and even powder samples. The sensor does not need to be dipped into the sample, a few drops are sufficient.

Supplier: VWR Collection

This meter accurately provides results in conductivity (micromhos/cm and microsiemens/cm), resistivity (megohms), and dissolved solids (parts per million).

Supplier: HORIBA

These meters feature a unique flat sensor that enables quick, accurate and direct measurements of micro samples as small as 0,12 ml. The sensor does not need to be dipped into the sample, a few drops are sufficient.

Supplier: HORIBA

This meter directly measures sodium ion concentration in 0,3 ml sample (or 0,05 ml with sampling sheet B) and converts it into salinity or NaCl salt concentration. The replaceable flat sensor utilises a sodium ion selective electrode (ISE) that requires only a few drops to enable quick and accurate analysis.

Supplier: Lovibond

The SD 60 ORP meter is a compact, easy to use meter for the measurement of OPR or redox potential.

Supplier: Lovibond

The SD40 Multi meter is a compact, easy to use handheld meter for the measurement of pH/Con/TDS/Salt/T.

Supplier: WTW ONLINE

Universal monitor DIQ/S 281. The new system 281 - the digital and cost-efficient single parameter measuring point with proven IQ Sensor Net technology and IQ sensors for the standard parameters. Low-cost alternative to analog measuring points

Supplier: Greisinger

For comfortable measurements of pH value and temperature.

Supplier: MOINEAU

This pH tester in pen format is used to measure the pH of a solution.

Supplier: Hanna

pH tester supplied with interchangeable pH combination electrode.

Supplier: HORIBA

These waterproof meters can measure and display up to 11 parameters simultaneously with one single probe. Thanks to their rugged design and their field replaceable sensors they are ideal for outdoor use, for example, when testing ground or surface water. Their compact size and the hand strap enable one-handed operation.

Supplier: HORIBA

These pocket meters incorporate a flat sensor technology, using the same measurement principle as traditional glass electrodes but in a small and compact flat format. The flat electrode enables quick and accurate direct measurements of solid or liquid micro samples as small as 0,1 ml μl (0,05 ml when using the sampling sheet). Large volume samples can also be measured easily by immersing the sensor.

Supplier: CONSORT

Robust, dust- and splash-proof benchtop meters for several parameters.

Supplier: Lovibond

The SD 20 ORP meter is a compact, easy to use handheld meter for the measurement of ORP.

Supplier: Lovibond

The SensoDirect 150 is designed for multi purpose operation and measures pH/Redox, dissolved oxygen and conductivity/TDS.

Supplier: Greisinger

This meter is a simple handheld instrument for measuring pH, mV, temperature and relative humidity (0,0 to 70,0).