You searched for: Cooling Circulators

Supplier: VWR Collection

Stainless steel baths with user friendly MX temperature controller plus three control buttons and on-screen prompts. Baths can be used for external closed loop circulation. The controller rests on a chemically resistant DuraTop™ deck, which is cool to the touch, even when working at high temperatures, and units feature LidDock™ lid stowing system. Cool Command™ technology regulates the amount of cooling required, saving energy while providing rapid cooling and precise control at elevated temperatures.

Supplier: VWR Collection

These circulating chillers are an environmentally friendly, water-conserving and reliable means of controlling the temperature of liquids in open tanks or closed loop systems. They provide high cooling performance at low cost. With a temperature range from −10 to +40 °C, they are ideally suited for many process and routine applications.

Supplier: VWR Collection

VWR® recirculating chillers are ideal for use with rotary evaporators, as they ensure constant, reproducible cooling conditions and avoid wasting tap water thereby increasing cost savings. Designed to be user friendly, the units have an easily accessible filling port on top of the unit and a drain tap at the back. The chillers have a stainless steel reservoir, operate using R134 refrigerant and can be used in the permitted ambient temperature range of 15 to 32 °C.

Supplier: QSONICA LLC

Sonication generates heat which may be detrimental to some applications. Attempting to control temperature with ice and/or repeatedly changing out water is tedious and no longer necessary. This chiller automates the sample cooling process.

Supplier: VWR Collection

Stainless steel circulating baths with choice of Advanced Programmable or Advanced Digital temperature controller. Both are easy to navigate with large, intuitive displays and multiple communication options, including USB-A and B, RS232/485, Ethernet and external temperature probe. The reservoir drain can be accessed by removing the front panel. All models feature user-adjustable, high temperature safety cut-off points, as well as over-temperature protection. The surface is cool to the touch, even when operating at high temperatures.

Supplier: SI Analytics

The flow-through cooler CK 310 is the perfect complement to bath thermostats of CT 72 series to extending their temperature range to below ambient temperature.

Supplier: JULABO GmbH

VALEGRO recirculating coolers are environmentally-friendly all-rounders for a wide range of temperature control tasks. They are characterised by a good ratio between cooling capacity and unit size as well as optimal usability. They work with natural refrigerant and can be adapted to application requirements thanks to their adjustable pump.

Supplier: JULABO GmbH

Compact refrigerated/heating circulators which can be used on benchtop or in a fume hood, ideal for temperature control of distillation apparatus or mini plant installation. All four models feature pump connections for external temperature applications and a bath opening for temperature control of small objects directly in the circulator bath. The maximum ambient temperature of +40 °C and air cooled ventilation means the units can be positioned alongside other units or directly in a fume hood.

Supplier: JULABO GmbH

Ultra-low temperature refrigerated circulators for heating and cooling. The units are suitable for external temperature applications with simultaneous operation in the bath tank. The units provide particularly high heating and cooling capacities for rapid heating and cooling times even for large volume, external systems. FP models offer proportional cooling control to ensure energy saving performance and to reduce heat generation to the environment. Models with the designation W are water cooled. All models have handles and castors which allow easy transportation and drain ports for conveniently draining the bath fluid. The units offer an improved insulation to prevent ice formation and have a filling level display. Typical applications: Temperature control of jacketed reaction vessels, autoclaves, mini plant installations, kilo labs, freezing point determination, calibration at low temperatures and petroleum testing.

Supplier: JULABO GmbH

The compact AWC100 air to water recirculating cooler is designed to remove small heat loads from external systems where cooling water can be above ambient and where temperature control is secondary. Coolers which do not have a refrigeration unit are ideal for use in circuits with Peltier elements, analytical devices, polarimeters, refractometers and CCD cameras. The ventilator speed (i.e. the cooling capacity) can be adjusted in two stages, cooling capacity depends on the temperature difference between return line temperature and ambient temperature. The cooling principle: Warm bath fluid is pumped through the heat exchanger. The heat exchanger is cooled by a ventilator motor and thus removes the produced heat.

Supplier: JULABO GmbH

FD flow through coolers are used for cooling a loop circuit of a closed system, the unit must be connected in the return line of a heating circulator. The compact, easy to use units are suitable for a variety of cooling applications.

Supplier: JULABO GmbH

Recirculating coolers can handle virtually any cooling requirements in laboratories or industrial environments efficiently.

Supplier: JULABO GmbH

Compact, ergonomically designed chillers which have integrated stainless steel tanks with large volumes. Models can be either air or water cooled. Applications include use with rotary evaporators, autoclaves, reaction vessels and for routine laboratory cooling. All units have an LED temperature display for actual/set point integrated into a splash-proof keypad and recessed grips for easy relocation integrated in the housing. A hinged tray serves as a compartment for the operating manual and other documents. The removable venting grid allows for easy cleaning of the condenser. Venting slots are located on the front and back, allowing units to be placed directly next to each other. Models FL2503 to FLW11006 have an early warning function with sensor monitoring to signal if the condenser is dirty, and online diagnostics with 'BlackBox' function.

Supplier: JULABO GmbH

FT immersion coolers are primarily used for counter cooling when connected to a heating circulator, or for rapidly cooling fluids down to low temperatures. The compact, easy to use units are suitable for a variety of cooling applications.

Supplier: JULABO GmbH

Environmentally friendly recirculating coolers that saves tap water, these units were designed for simple cooling tasks where reliable continuous operation is important. Due to their compact design, the coolers can be positioned either on or under laboratory bench tops. Units can be used with water, water/glycol or Julabo Thermal G. They are ideal for cooling rotary evaporators, Kjeldahl instruments, measurement cells, automated analysis systems, CCD cameras, polarimeters, refractometers, calorimeters and Soxhlet apparatus.

Supplier: IKA

The CBC VISC lite heating and cooling bath circulator covers a wide temperature range from −25 to +125 °C and is designed to be combined with the IKA ROTAVISC viscometers.

Supplier: JULABO GmbH

Environmentally friendly recirculating coolers that save tap water, units are rapid and powerful, and offer short cool-down times and high efficiency. Due to the compact design, the coolers fit either on or under laboratory benchtops. FC units feature two separate multi-displays (LED) for actual and set point values.

Supplier: LAUDA

The Microcool range of circulation chillers includes five compact models providing cooling capacities from 0,25 to 1,2 kW with working temperatures from −10 up to +40 °C. An RS232 interface and alarm contact are integrated as standard, enabling system integration into processes without additional costs.

Supplier: LAUDA

The PRO cooling circulation thermostats are ideal for external applications where rapid temperature changes are required. Their cooling output of 0,6 to 1,5 kW, combined with a very small filling volume enable these rapid temperature changes.

Supplier: LAUDA

Integral T are process thermostats with an integrated cooling system for dynamic temperature control within external circuits.

Supplier: LAUDA

Cooling thermostats with menu navigation in plain text for user friendly operation. Various interface modules are available as accessories. All models are available as air or water-cooled variants.

Supplier: LAUDA

The PRO cooling bath thermostats for internal bath applications are equipped with a multi-stage adjustable pump. This ensures good mixing of the bath. It has 360º turnable and detachable control panel for remote control.

Supplier: LAUDA

Cooling thermostats with menu navigation in plain text for user friendly operation. Various interface modules are available as accessories. All models are available as air or water-cooled versions. They are similar in specifications with the ECO model thermostats, in addition these models comes with natural refrigerant.

Supplier: LAUDA

Ultracool circulation chillers provide precise temperature control in an extended operating temperature range from −10 to +35 °C and a temperature stability of ±0,5 K.

Supplier: LAUDA

The Alpha cooling thermostats have an easy to use control console featuring three button operation and large, clear LED display, ensuring easy navigation through the menu. The thermostats are suitable for use with non flammable liquids (water, water/glycol mixtures). Units can provide both internal and external thermostating. Temperature stability of ±0,05 K gives precise heating and cooling suitable for a wide range of applications. The automatic cooling system enables cooling throughout the entire temperature range of −25 to +100 °C. All cooling thermostats contain a compressor system which can be switched on or off as required, thus conserving energy and saving wear and tear on the compressor to give a longer working life.

Supplier: LAUDA

The Proline Kryomats units are floor-standing, compact cooling thermostats and are fitted with the Command control head as standard. This features a back-lit, graphic LCD display with actual values in 0,1/0,01 or 0,001 °C resolution, data input via either cursor keys or numerical soft keys. The display provides clear text messages and graphical representation of sequential temperature curves and is menu-driven in four languages (German, English, French and Spanish). With large bath opening and volumes of up to 40 litres, this range is particularly suitable for internal applications.

Supplier: LAUDA

The compact Variocool circulating chillers are ideal for demanding temperature control tasks in laboratories, mini plants and production. The units have a colour TFT screen and membrane keyboard, a USB interface and an integrated alarm which are easily accessable on the front of the unit. They also feature an electronic fill gauge on the display and low fluid level alarm. Models can be either air or water cooled, all have lockable castors. A wide range of factory fitted options and interfaces which can be retrofitted give the user greater flexibility and control. Options include high power pumps to allow higher supply pressure, heaters adapted to the cooling capacity to enable rapid heating as required, flow control, outdoor installation, use with deionised water and noise reduction. Optional interfaces including analogue module, RS232/485, contact modules, profibus and PT100/LiBus modules are all available to facilitate customisation of the unit to applications. For details of the options and interfaces, please contact your local Avantor sales office.

Supplier: GRANT INSTRUMENTS

Grant low temperature circulators provide a source of precision cooling for most low temperature applications.

Supplier: HUBER

Unichillers® offer increased efficiency, stable pressure and delivery performance with a constant cooling water temperature compared to traditional tap water cooling.

Supplier: Cole Parmer

CBH-400 recirculator offers full-range cooling for quick ramp up and cool-down - saves valuable time.