You searched for: Blocks

Supplier: VWR Collection

Solid blocks: For use as a low temperature hotplate or for custom drilling.

Supplier: VWR Collection

Block heater block, VWR®, Aluminium block, For: Water bath block (115×73×38 mm), No. of holes: -

Supplier: VWR Collection

Constructed from a solid anodised aluminium block.

Supplier: VWR Collection

Block heater block, VWR®, Interchangeable tube block, Well size: Ø 16,8 mm, For: 9×5 ml Eppendorf tubes, No. of holes: 9, Depth: 49 mm

Supplier: VWR Collection

Block heater block, VWR®, Mini block with thermometer well, not suitable for use with mini block heaters with heated lid, Well size: Ø 17,1 mm, For: 15 ml tubes, No. of holes: 4, Depth: 72,4 mm

Supplier: VWR Collection

Block heater block, VWR®, Single block, Well size: Ø 25,8 mm, For: 25 mm vials, No. of holes: 8, Depth: 45,0 mm

Supplier: Thermo Fisher Scientific

Blocks for digital block heater to optimise flexibility and performance.

Supplier: GRANT INSTRUMENTS

Block heater block, Block for TS-DW, B-2BBI, For: One SSI Bio

Supplier: IKA

Block heater block, Double block, For: 96- or 384-well plate (1), Depth: 13,5 mm

Supplier: GRANT INSTRUMENTS

Block heater block, Grant-bio, Block, interchangeable for 2×Ø 48 mm tubes

Supplier: GRANT INSTRUMENTS

Grant blocks have a depth of 63 mm, ensuring precise temperature control for test tube applications.

Supplier: Cole-Parmer

Interchangeable heating blocks offer excellent thermal conductivity.

Supplier: NABERTHERM

Heating elements for N7 (1 Set).

Supplier: Thermo Fisher Scientific

Reacti-Block™ aluminium blocks are available with many hole configurations, machine-drilled to accommodate almost any size Reacti-Vial™ small reaction vial, test tube or microcentrifuge tube.

Supplier: IKA

Reaction blocks allow syntheses to be carried out in round-bottomed flasks at temperatures up to 180 °C, avoiding the use of oil baths. The system ensures optimum heat transfer from the heating plate directly into the medium. Uniform mixing is also guaranteed since there is no interference to the magnetic field from the aluminium blocks. Reaction blocks range from 100 to 5000 ml in size, and inserts accommodating round bottom flasks from 10 to 3000 ml are available. Due to the wide range of interchangeable inserts, this system can be used for a range of different applications with the RCT, RET and RH magnetic hotplate stirrers.

Supplier: Brand

Keep your samples and media cool for up to three hours with these Cooling Blocks from BRAND.

Supplier: EPPENDORF

Block heater block, Interchangeable thermoblock for 4 Eppendorf DualChip slides, with clamping plate, For: 70 °C max

Supplier: EPPENDORF

Exchangeable in just seconds. Individually sensor-controlled SmartBlocks are your solution for maintaining accurate, uniform temperatures. A wide variety of these flexible thermoblocks for all common laboratory vessels support a broad range of applications - for use with Eppendorf ThermoMixer® C and ThermoStat C.

Supplier: OHAUS

Solid blocks: For use as a low temperature hotplate or for custom drilling.

Supplier: OHAUS

Plexiglass cover reduces air flow for additional temperature stability in low temperature applications.

Supplier: Thermo Fisher Scientific

Block heater block, Aluminium, Aluminium block, For: 96-well microplate

Supplier: OHAUS

Modular blocks are constructed from a solid anodized aluminium block. The close contact of tubes-to-block walls allow for maximum heat retention. Each block has a thermometer well for measuring block temperature.

Supplier: Cole Parmer

Turn an existing 15,2×15,2 cm hotplate into a heating mantle.

Supplier: Heidolph Instruments GmbH & Co.KG

Safe, fast and efficient way of heating and stirring round bottom flasks from 10 ml to 5 litres, suitable for use with all makes of hotplates with diameter up to 145 mm. Heat-On blocks replace oil baths and heating mantles, manufactured from solid aluminium they provide excellent heat transfer, prevent hotspots and avoid spills making chemistry safer. Unique well design prevents flasks cracking whilst maximising surface area contact.

Supplier: LABCONCO

All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.

Supplier: JENCONS SCIENTIFIC

Interchangeable blocks are made of high grade, non porous, anodised aluminium. Except the blocks used for plates and slides, all other blocks include positions for a block lifter and calibration thermometer.

Supplier: ASYNT

The DrySyn® MAXI 2 L is a stand-alone 2000 ml version of the standard DrySyn MAXI Kit (which alternatively has a 3000 ml base and 2000 ml insert) which comes with heat resistant safety lifting handles.

Supplier: ASYNT

The DrySyn heating block range is the alternative to oil baths and heating mantles. The systems offer clean, safe synthesis for single or multiple reactions.