Supplier: Texwipe

TechniCloth II wipes are made from a hydroentangled, non woven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fibre with the cleanliness and strength of a synthetic wipe. TechniCloth II features proprietary ULP (ultra low particulate) treatment, giving it significantly lower particle generation than TechniCloth.

Supplier: Texwipe

This soft 100% melt-blown PP wipe is pre-wetted with a 0,2 µm filtered, 70% isopropyl alcohol/30% deionised water solution.

Supplier: Texwipe

Alpha® 1 Microfibre cleanroom wipes are made from a 80% polyester/20% nylon material with a sealed edge, and are cleanroom manufactured.

Supplier: Texwipe

These wipes constructed from a hydroentangled polyester/cellulose blend are pre-wetted with 70% isopropyl alcohol and 30% DIW (filtered through a 0,2 μm filter). Each package is gamma irradiated to 10⁻⁶ Sterility Assurance Level.

Supplier: Texwipe

This wipe is constructed from a non woven blend of 55% cellulose and 45% polyester that offers both durability and absorbency. The blue tint indicates exposure to liquid which makes the wipe ideal for alerting the user to the exposure of liquids and/or dangerous spills.

Supplier: Texwipe

SterileWipe™ AS 10 is a 2 ply, double knit construction, 100% continuous filament polyester wipe that offers high sorbency in a sealed-border wipe to prevent particle and fibre release.

Supplier: Texwipe

Sterile TexTra™ is a single-ply, double-knit, 100% continuousfilament polyester wipe that offers high-capacity sorption in a heavyweight, large surface area wipe. It is an economical alternative to two-ply polyester wipes and ideal for spill control as well as for cleaning pharmaceutical aseptic fill areas, biotechnology manufacturing facilities, and microbiological laboratories.

Supplier: Texwipe

Cut-edge polyester single ply wipe that is ideal for floor cleaning and for applying cleaning solutions and disinfectants on floors.

Supplier: Texwipe

These wipes are constructed from a 100% melt-blown PP substrate that is pre-wetted with 70% isopropyl alcohol and 30% DIW (filtered through a 0,2 μm filter).

Supplier: Texwipe

These single-ply, heavyweight polyester sealed-border wipes offer the same capacity sorption as a two-ply wipe. They are suitable for all general purposes as well as for applying and removing large volumes of cleaning solutions and disinfectants.

Supplier: Texwipe

Revolve™ wipes, sustainable wipes made for the cleanroom industry, are made from 100% upcycled polyester material with a sealed edge, processed on Texwipe’s fully automated manufacturing system. Revolve™ wipes contribute to sustainability goals, reducing the amount of post-consumer water bottles going into landfills and reducing the level of carbon emissions.

Supplier: Zellstoff-Vertriebs-GmbH & Co. KG

These wipes have point-to-point micro-embossing.

Supplier: Texwipe

PolySat® is constructed from a 100% melt-blown polypropylene substrate that is pre-wetted with 70% isopropyl alcohol and packaged in a resealable FlexPack. PolySat® is convenient for cleaning sensitive surfaces and polishing equipment in controlled environments.

Supplier: Texwipe

AlphaSorb® HC is a cleanroom laundered, 2 ply, 100% polyester wipe made from continuous-filament polyester knitted in a double-knit interlock pattern.

Supplier: Zellstoff-Vertriebs-GmbH & Co. KG

These high-quality non woven wipes are suitable for moist and dry cleaning applications.

Supplier: KIMBERLY CLARK

The WypAll® X80 Range has been specially designed for heavy-duty, rough surface wiping, where strength and bulk are key requirements. WypAll® X80 cloths do not tear and maintaining consistency in quality and size.

Supplier: Texwipe

SterileWipe™ LP 10 is a 100% continuous-filament polyester wipe with thermally sealed borders that have been designed to control particle and fiber contamination. The wipe is suitable for cleaning sterile environments such as pharmaceutical aseptic fill areas, biotechnology manufacturing facilities, microbiological laboratories, sterile suites and prep rooms.

Supplier: NEW PIG

Strong and solvent-resistant wipes made of a cellulose/polyester blend. Ideal for daily heavy duty jobs, such as wiping machines and rough parts. Also soft enough for cleaning skin or preparing surfaces.

Supplier: Texwipe

The sealed-border technology used for these wipes produces four fully sealed borders to prevent the release of fibres and particles. The fabric is a no-run interlock, double knit from 100% continuous-filament polyester.

Supplier: Texwipe

This 100% continuous filament polyester wipe with thermally sealed borders is engineered to have the lowest level of releasable particles and fibres for critical and sterile environments. The wipe is pre-wetted with 70% USP IPA.

Supplier: Portwest

These PP wipes remove wet paint, oil, grease and grime. For use on hands, tools and surfaces.

Supplier: Zellstoff-Vertriebs-GmbH & Co. KG

These layered cellulose wipes feature a rectangular shape, the surface is therefore particularly large. This makes them ideal for general use in nursing and care facilities.

Supplier: Texwipe

Double-knit 100% continuous-filament polyester wipe is ideal for removal of process residues and broken wafer segments.

Supplier: Zellstoff-Vertriebs-GmbH & Co. KG

These high-quality viscose fleece wipes with textile characteristics are suitable for wet and dry cleaning. The wipes are very soft and yet lint-free, they can absorb large amounts of liquid, remain tear-resistant and meet food safety requirements.

Supplier: Zellstoff-Vertriebs-GmbH & Co. KG

These high-quality non woven wipes are suitable for moist and dry cleaning applications.

Supplier: Texwipe

Revolve™ sustainable wipes are made for the cleanroom industry and are composed of 100% upcycled polyester material with a sealed edge, processed on Texwipe’s fully automated manufacturing system. Revolve™ wipes contribute to sustainability goals, reducing the amount of post-consumer water bottles going into landfills and reducing the level of carbon emissions.

Supplier: Essity

High quality kitchen roll for wiping and cleaning. A flexible alternative in many kitchen environments.

Supplier: Texwipe

TechniScrub™ dry wipes are made from a 50% polyester/50% cellulose non woven material with a cut edge. They are cleanroom manufactured.

Supplier: Texwipe

SterileWipe™ LP is a 100% continuous-filament cut edge polyester wipe that is low in particle generation and extractable levels. It provides excellent cleaning performance in critical sterile environments such as pharmaceutical aseptic fill areas, biotechnology manufacturing facilities, microbiological laboratories, sterile suites and prep rooms.

Supplier: Texwipe

SterileWipe™ HS II is a non woven cellulose/polyester-blend wipe offering both durability and absorbency. It is an excellent general purpose sterile wipe in areas where economy and cleanliness are of critical importance. Designed for cleaning and polishing equipment and environmental surfaces during and following production flow.