You searched for: Swabs

Supplier: 3M Food Safety

Water hygiene test to measure free ATP in a sample.

Supplier: DELTALAB

Sterile swabs sterilised by ethylene oxide for use when samples do not need to be transported.

Supplier: CONTEC

The SF-2 swab consists of 100 pore/inch sealed closed-cell foam head with a PP handle.

Supplier: CONTEC

The SF-12 sealed foam swab consists of polyurethane foam bonded to a PP handle without the use of adhesives or binders.

Supplier: CONTEC

CONSTIX® SF-11 swabs consist of a foam head formed over the end of a 152 mm cotton-tipped applicator with wood handle. The foam head is an 100ppi sealed closed-cell polyurethane foam.

Supplier: CONTEC

SC-7 sharp point, double-ended cotton swabs consist of high quality, long staple length cotton, tightly wrapped and shaped on both ends of high strength, wound paper handles.

Supplier: CONTEC

The SF-19 sealed foam swab consists of a 100 PPI sealed closed-cell polyurethane foam head formed over the cotton bud of a 6” applicator with wooden handle.

Supplier: HYSERVE

This Swab System is designed for sampling on surfaces in the production environment. It consists of a sterile swab in a tube with 10 ml sterile PBS buffer for sampling, transport, and subsequent quantitative detection of present microorganisms in combination with Compact Dry and Easy Plate culture medium plates.

Supplier: CONTEC

The SP-8 sealed polyester swab consists of 100% knitted polyester fabric that is thermally bonded to a PP handle with a large paddle.

Supplier: CONTEC

The SF-7 swab consists of 100 PPI polyurethane foam adhesive-bonded to a flexible nylon tip. The tip is mechanically secured in a tubular PP handle.

Supplier: CONTEC

SC-1 double-ended pointed cotton swabs consist of high quality, long staple-length cotton, tightly wrapped and shaped on both ends of high strength, wound paper handles.

Supplier: DELTALAB

This is a variation of the traditional Amies media swab where the media is presented on liquid form without agar.

Supplier: CONTEC

This static-safe swab consists of a pointed-tip sealed foam head attached to a conductive polymer handle.

Supplier: Texwipe

This ESD-safe stick with micro tips is a double-ended cleaning and prepping tool.

Supplier: CONTEC

SC-4 consists of high quality, long staple length cotton, tightly wrapped and shaped on both ends of high strength, wound paper handles.

Supplier: CONTEC

The SF-13 swab consists of 100 PPI open-cell foam tightly sealed around the tip of a glass-filled PP handle.

Supplier: VWR Chemicals

Surface sampling sponges in two forms: Dry sponge sterile sampling bag with write-on strip, containing a dry, biocide-free cellulose sponge, or wet sponge sterile sampling bag, with a foil-sealed, pre-moistened cellulose sponge, and 10 ml of sterile neutralising buffer.

Supplier: MERCK LIFE SCIENCE

The ideal swab for microbial monitoring of isolator and clean room surfaces – Requires opening only once for sampling. The ICR Swab is a unique system for environmental monitoring of dry surfaces, such as filling needles, equipment recesses, uneven surfaces and tubing in clean rooms and isolators. It is a qualitative presence/absence test for microbiological contamination. This ‘all-in-one’ heipha ICR Swab System requires opening only once for sampling. All further steps, such as addition of broth, incubation and detection of turbidity, are performed within the closed system, thus minimizing the risk of potential contaminations due to handling.

Supplier: MEDICAL WIRE EQUIPMENT

These dry swabs are ideal for collecting specimens or samples for analysis or for transferring materials during a diagnostic procedure.

Supplier: Copan

Our Swab Rinse Kits line includes comprehensive tailor-made collection and devices for the detection of environmental microbial contamination in a broad range of environments, such as food production, pharmaceutical sites, and hospital wards. Inspectors and Quality Assurance personnel can use SRK® products for routine surface monitoring within manufacturing areas, hospital surfaces, and equipment.

Supplier: MEDICAL WIRE EQUIPMENT

Preimmersed swabs for use with a self standing tube and a high visibility blue cap and swab, which is easy to find and retrive if accidentally dropped.

Supplier: BAILLY

Plain swabs suitable for a wide range of applications.

Supplier: MEDICAL WIRE EQUIPMENT

Swabs with 45 mm breakpoint, dry or pre-moistened with sterile diluent.

Supplier: 3M Food Safety

3M™ Dry-sponge with gloves is a biocide-free cellulose sponge that includes two polyethylene gloves and a sample bag.

Supplier: MEDICAL WIRE EQUIPMENT

Individual labelled sterile tubes with polyester bud, standard plastic shaft.

Supplier: 3M Food Safety

3M™ Sponge-Stick in sample bag with 10 ml D/E neutralising broth uses simplified packaging to minimise handling and preparation, and reduces waste.

Supplier: 3M Food Safety

The 3M™ Dry-Sponge is a biocide-free cellulose sponge that comes with a printed sample bag.

Supplier: MEDICAL WIRE EQUIPMENT

Each transport tube contains Amies medium preferred because the inorganic buffer ensures maintenance without overgrowth.

Supplier: MEDICAL WIRE EQUIPMENT

Flocked swabs are ideal for PCR, molecular assays, forensic applications, food applications, and direct antigen testing. The bud is formed by a layer of tiny multi-filament polyester fibres of varying lengths, increasing the effective surface area of the swab.

Supplier: MEDICAL WIRE EQUIPMENT

Transwab with a narrow shaft and bud for nasopharyngeal or urethral sampling.