You searched for: Microplate Seals

Supplier: Corning

Porous film seals PP and PS culture plates, 96 and 384-well plates, and other assay plates.

Supplier: Corning

Silicone septa mat for capillary sequencing of 96-well PCR plates. Mat forms a tight seal on wells but is easily accessible through septa in each well. Ideal for work on ABI multi-capillary sequencing instruments.

Supplier: Corning

Polyester based with uniformly and consistently applied acrylic adhesive to eliminate the edge effect in ELISA assays. Suitable for sealing tissue culture plates, for short-term storage and incubation, for transport and the containment of biohazardous solutions.

Supplier: Corning

Multiple formats for specific and precise fit on 96-well and 384-well plates and blocks.

Supplier: Thermo Fisher Scientific

Made from thermoplastic elastomer (TPE), except pre-slit silicone well cap. For sealing 96-well plates, particularly 1,3 ml and 2,0 ml U96 DeepWell™ plates. TPE well caps are resistant to DMSO, ethanol and methanol. Silicone well cap is solvent resistant, but is not suitable for 100% DMSO.

Supplier: Corning

For sealing 96 and 384-well PCR plates.

Supplier: Thermo Fisher Scientific

Polyester film with acrylic adhesive. Provides an effective seal for all MicroWell™ plates used in PCR and cell culture.

Supplier: Corning

Axygen AxyMat sealing mats can be used in a wide range of temperatures for PCR and storage applications.

Supplier: Thermo Fisher Scientific

Polyester tape with acrylic adhesive. Easy peel, easy seal general-purpose tape with a faster application time than normal tape in loose sheets.

Supplier: Corning

Silicone sealing mats suitable for deep well plates and for thermal cyclers with screw down lids.

Supplier: Thermo Fisher Scientific

Vinyl film with pressure sensitive acrylate adhesive. For application to plate top or bottom, to protect light sensitive samples.

Supplier: Thermo Fisher Scientific

WebSeal™ 7 mm diameter Round 96-well plate Sealing mats are designed to ensure high quality data with an uninterrupted workflow for high-throughput applications using GC and HPLC/UHPLC and are ideal for regulated labs that use water and polar solvents.

Supplier: iST Scientific Ltd

Transparent peelable film for storage. Suitable for aqueous sample storage.

Supplier: Simport Scientific

Amplitube™ domed cap strips ensure a perfect closure and a positive seal during thermal cycling and prevent evaporation.

Supplier: iST Scientific Ltd

Pierceable foil seal with good solvent resistance. Suitable for PCR, compound storage, and sample shipping.

Supplier: Simport Scientific

Amplate™, Microplate seal, Mat (96 wells), Single sheet/mat/strip, Sealing mat for 96-well PCR plates, Santoprene™, Blue

Supplier: Brand

Cover mats reduce the maximum volume of wells.

Supplier: iST Scientific Ltd

Pierceable, peelable barrier foil for PCR and sample storage.

Supplier: Brand

Aluminium sealing film can be pierced easily with a pipette tip for sample removal. Temperature range: −80 to +120 °C.

Supplier: Simport Scientific

Adhesive sealing films reduce sample-to-sample or well-to-well contamination and/or spill over. SecureSeal™ has the differential advantage of perforated end tabs and a multiple split backing which allow for easier and more accurate positioning and more secure sealing. The polyester based film with acrylic adhesive is inert and thus compatible with almost all microplate procedures. SecureSeal™ is less than 0,001% moisture permeable under high humidity conditions and less than 0,01% oxygen permeable.

Supplier: G-Biosciences

Acetate film with acrylic adhesive. This self-adhesive microplate sealing tape is suitable for sealing both 96-well and 384-well plates. The precut, pressure-senstive tape seals and reseals the surface of the plates during incubations to prevent evaporation and allow more vigorous mixing. The tape will reseal the plates 2 to 3 times.

Supplier: iST Scientific Ltd

Peelable DMSO resistant foil for polypropylene plates. Suitable for low temperature and ambient temperature storage with DMSO and other solvents.

Supplier: iST Scientific Ltd

Non woven gas permeable and peelable seal for PP and PS plates. Suitable for short term incubation, agriculture and seed storage, insect storage, cell culture.

Supplier: Brand

Transparent PP film allows the visual inspection of the samples. Temperature range: −40 to +125 °C.

Supplier: Brand

Black sealing film made of vinyl is highly suitable for fluorescence measurements because of its light-absorbing characteristics. Temperature range: −40 to +80 °C.

Supplier: Thermo Fisher Scientific

Microplate sealing tape consisting of pre-cut, pressure-sensitive sheets for sealing the surface of standard 96-well or 384-well microplates during incubation steps.

Supplier: Brand

Polyester flims suitable for PCR and Real-Time PCR measurements. Temperature range: –40 °C to +120 °C.

Supplier: Simport Scientific

Superflex™, Microplate seal, Adhesive film/foil/tape (96/384 wells), Single sheet/mat/strip, Closure for SuperFlex™ 96-well PCR plates, PP, Clear, Non sterile

Supplier: Brand

Chemical resistant PE/PP film offers adhesive-free areas over the wells to avoid contamination. Furthermore, it can be pierced easily with a pipette tip (for sample removal). Temperature range: −40 to +90 °C.

Supplier: Brand

White light-reflecting film made of vinyl should be used in luminescence measurements. Temperature range: −40 to +80 °C.