You searched for: Bottle Closures
Bottle closures allow for safe transfer of liquid media by securely closing jars or roller bottles. Various liners offer additional solvent resistance while permeable styles successfully filter during gas exchange and media sterilization procedures. Protect samples even under harsh freeze-drying lyophilization or autoclaving conditions with temperature tolerant caps. Compression caps for microscale reaction containers support stable observations. Disposable and reusable threaded caps are offered in many colours with or without septas.
Caps for Woulff's bottle
Supplier: Sartorius
Screw cap, with silicone seal and tube inlet, For: Woulff's bottles, Thread: GL 18, PP
Expand 2 Items
Replacement fittings for quick filling/venting closure, Nalgene®
Supplier: Thermo Fisher Scientific
PP plug connectors with hose barb.
Expand 4 Items
GLS 80® wide mouth connection transfer cap system, DURAN®
Supplier: DWK Life Sciences
PP and PTFE.
Expand 1 Items
Multiple distributors for bottles with GL 45 thread, BOLA
Supplier: Bohlender
PPS screw cap, black, distributor body made from PTFE or PFA.
Expand 2 Items
Screw cap, GL 45, PMP, DURAN® YOUTILITY®
Supplier: DWK Life Sciences
A highly transparent and ergonomic polymethylpentene cap for GL 45 DURAN® laboratory bottles.
Expand 1 Items
Caps with Aperture, GL 45
Supplier: ROBU GLASFILTER
ROBU® caps with aperture, complete set with silicone washer.
Expand 3 Items
Distributors for reaction vessels (S), BOLA
Supplier: Bohlender
PP screw cap, blue and PTFE body.
Expand 3 Items
Stretchable silicone lids for laboratory vessels, DURAN®
Supplier: DWK Life Sciences
These stretchable silicone lids are used to close round and square vessels and are available in three sizes and colours, as well as a set of three.
Expand 21 Items
Distributors for bottles
Supplier: Bohlender
Black screw cap made of PPS and available with or without stopcocks. Distributor body made of PTFE with 2 or 3 ports with female thread UNF 1/4" 28 G on upper and lower sides and stopcock made of FEP for each port.
Expand 8 Items
Screw caps for laboratory bottles, DURAN®
Supplier: DWK Life Sciences
PBT, red, with PTFE coated seals.
Expand 5 Items
Multiple distributors for bottles with GL 45 thread, BOLA
Supplier: Bohlender
PPS screw cap, black, distributor body made from PTFE.
Expand 5 Items
Screw Cap GL 40
Supplier: RIXIUS
Screw cap made of black PP with ALU laminated PE foam insert for thread GL 40.
Expand 1 Items
Multiport connector caps, GL 32, DURAN®
Supplier: DWK Life Sciences
The reusable GL 32 caps allow the smaller 50 ml round or 100 ml DURAN® square bottles to be used be used for sampling, liquid feeding or transfer. Flexible options of 2, 3, or 4 stainless steel tubing connectors.The barbed male tubing connector are suitable for tubing with a 3,2 mm inner diameter such as BPT peristaltic pump tubing.
Expand 3 Items
Seals for threaded connection caps, double sided, BOLA
Supplier: Bohlender
Silicone ring with double-sided PTFE washer. After assembly, the product is only exposed to PTFE.
Expand 7 Items
Screw Closures for Narrow Neck Bottle Series 301 and 302, LDPE
Supplier: Kautex
LDPE screw closures are packaged in polyethylene bags.
Expand 1 Items
Screw Caps for Bottles
Supplier: RIXIUS
Original closure, tamper-evident, with cone and 6 bars, Colour: Blue, PP, Thread: GL 80, Colour: Blue, PP
Expand 35 Items
Screw caps for bottles with GL threads, BOLA
Supplier: Bohlender
Screw cap with handy knurl, made of PTFE.
Expand 5 Items
Multiple distributors for bottles, BOLA
Supplier: Bohlender
Blue screw cap and distributor body both made of PTFE.
Expand 1 Items
HPLC distributors for bottles
Supplier: Bohlender
Green screw cap, made of glass-fibre reinforced PP, and distributor body made of PP.
Expand 1 Items
Aluminium screw closures, GL 45, DURAN®
Supplier: DWK Life Sciences
DURAN® GL 45 aluminium screw closures are made from high quality aluminium. They are available as a closed-top cap with a PTFE coated cap liner, or as an open-top GL 45 cap for use with septum or stopper.
Expand 2 Items
Multiple distributors for bottles, BOLA
Supplier: Bohlender
Screw cap and distributor body both made of PP.
Expand 2 Items
Seals for threaded connection caps, BOLA
Supplier: Bohlender
Silicone with PTFE washers.
Expand 14 Items
Flexible distributors for bottles, BOLA
Supplier: Bohlender
PP screw cap, green, distributor body and tubing connectors made from PP
Expand 3 Items
Multiple distributors for bottles with GLS 80 thread, BOLA
Supplier: Bohlender
PPS screw cap, blue, distributor body made from PTFE.
Expand 2 Items
Screw caps, WHEATON®
Supplier: DWK Life Sciences
Rubber lined caps feature a non-toxic white styrene-butadiene rubber liner ideal for cell culture work.
Expand 62 Items
Over-caps, 45 mm, black phenolic, DURAN®
Supplier: DWK Life Sciences
The 45 mm phenolic over-cap screws down over the open-top aluminium GL 45 cap covering and protecting the septum or stopper.
Expand 1 Items
Gas washing bottles heads
Supplier: Lenz Laborglas GmbH & CO.KG
Borosilicate glass 3.3.
Expand 2 Items
Supplier: GRANT INSTRUMENTS
Supplier: BOCHEM
Supplier: VWR Collection
Supplier: OMEGA BIO-TEK
Supplier: DWK Life Sciences
Supplier: Thermo Fisher Scientific
Supplier: VWR Collection
Supplier: Oxford Nanopore Technologies
Supplier: Integra
Supplier: Industrial Physics
Supplier: AAT Bioquest
Supplier: Integra
Supplier: Palbam
Supplier: VWR Collection
Supplier: VWR Collection
Supplier: FACELLITATE
Supplier: NANOENTEK
Supplier: Greiner Bio-One