You searched for: Bags

Supplier: Portwest

Aesthetic styling and functional design make this travel trolley bag a must have item. Internally the bag is split into three sections with hook and loop strip dividers, making it ideal for separating your items.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Reduce the number of janitorial steam sterilisation loads by using gamma irradiated mop bucket liners. Instead of before every cleaning, the mop bucket system is typically autoclaved only once per week, but with each cleaning, a new sterile mop bucket liner pack is opened, the bucket is lined, and cleaning solution is added to it for cleaning.

Supplier: KEYSTONE CLEANROOM PRODUCTS

BHD autoclave bags with Tyvek® drawstrings can be used as either the inner, or outer bag for the steam sterilisation of pharmaceutical change parts.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Tyvek® 1073B/HDPE autoclave bags are ideal for steam sterilisation of pharmaceutical components such as vial and syringe stoppers and caps. Also a good choice for heavy equipment parts where visibility into the bag is required.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Gamma irradiation sterilisation bags can be used as the primary, secondary, or tertiary packaging of items that will go through gamma irradiation processing, or sterilisation.

Supplier: VWR Collection

Sturdy, temperature resistant bags, ideal for disposing of non hazardous waste or hazardous waste that must first be autoclaved.

Supplier: INTERSCIENCE

These non-filter sample preparation bags are ideal for homogenising samples.

Supplier: VWR Collection

LDPE Micronova BinLiners™ are ideal for the collection and disposal of waste, collection and transportation of parts or raw materials, and storage in cleanrooms and controlled environments. Thickness of 1 to 6 mm available for a variety of applications; including covering equipment, holding production waste, document storage, lining large production totes and so on.

Supplier: Portwest

The bag made of highly durable 600D polyester fabric with a side zip pocket for stacking boots or helmet.

Supplier: NEW PIG

These chemical resistant bags are an ideal way to handle hazardous or contaminated waste while providing temporary storage or disposal in a safe manner. Polyethylene.

Supplier: RATIOLAB

Autoclavable PP bags for the disposal of contaminated labware.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Pre-sterilised and packaged in multiple layers of Tyvek peel pouches and poly bags to gain access into the aseptic area without excessive spraying and wiping with sanitisation agents. The bags are used for the removal and transport of media plates from the aseptic area to QC laboratories.

Supplier: THERMO BIOPROCESS DIVISION

The liners are designed to fit 'out-of-the-box'. It is applicable to all open- and closed-top mixing applications.

Supplier: Sampling Systems

PureBag for sealing powders or liquids.

Supplier: Thermo Fisher Scientific

Ideal for small lab items, botanical samples and other specimens. Not recommended for storing liquids. LDPE, 101 µm.

Supplier: Brady

These duffle bags are made of 600 denier polyester that are used for lock out kits.

Supplier: VWR Collection

3D cubic bags can fit in existing support containers. These support containers are available in either High Density Polyethylene (HDPE) and Polypropelene (PP), or stainless steel material.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Tyvek® 1073B bags are ideal for steam sterilisation of pharmaceutical components such as vial and syringe stoppers and caps as well as heavy equipment parts with sharp edges.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Tyvek® 1422A autoclave bags with drawstrings can be used as either the inner, or outer bag for the steam sterilisation of pharmaceutical change parts.

Supplier: VWR Collection

Bucket liners create an impermeable barrier between the disinfectant and receptacle.

Supplier: B. Braun

Urinocol® urine bags are PVC-free with protective film for better peeling and attachment by dividing the film possible and is latex-free with better adhesive properties for paediatric use.

Supplier: KEYSTONE CLEANROOM PRODUCTS

These bags protects needles from accidental touching after they are removed from the primary sterilisation packaging.

Supplier: MICRONOVA

These low density polyethylene Hazard BinLiner™ bags are designed for containing biomedical and hazardous waste in aseptic and controlled environments.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Eliminate the risk and expense of investigating the root causes of false positives with Keystone Cleanroom Products Sterile media plate transport and incubation bag system.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Protect your filling needles from accidental touching after they are removed from the primary sterilisation packaging. Also creates secondary level of protection during aseptic presentation.

Supplier: HEATHROW

These biohazard waste bags are for personal or general lab use, sizes to suit all needs.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Self-sealing Tyvek® 1073B bags are ideal for steam sterilisation of pharmaceutical components such as vial and syringe stoppers and caps as well as heavy equipment parts with sharp edges. No need to use or validate a heat sealing machine.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Easy-Tear Tyvek bags from Keystone Cleanroom Products are designed to satisfy the most stringent requirements in the sterilisation of critical pharmaceutical equipment and components.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Tyvek® 1422A autoclave bags with steam indicators can be used as either the inner, or outer bag for the steam sterilisation of pharmaceutical change parts.

Supplier: Seward (FermionX)

Blender Bag, Simplettes®, Simplettes® (250 mm), Packed: 1000 in 20 (sachets of 50)