You searched for: Media for Microbiology

Supplier: 3M Food Safety

The 3M™ Petrifilm™ Aerobic count plate is a time-saving, sample-ready plate designed to determine total aerobic bacteria populations.

Supplier: DOEHLER GROUP

The concentrated LMC broth is based on Lactose-Peptone broth as described in the German Drinking Water Regulation (DEV, DIN 38411) and the Mineral- and Table Water Regulation (MwTVO) for the analysis of E.coli and coliform bacteria in water. LMC is 10-fold concentrated and a sample quantity of 250 mL water can be added directly into the original bottle. After mixing with the water sample, the broth attains the required concentration (double concentrated) and is ready for immediate incubation.

Supplier: LIOFILCHEM

Two-sided slide with agar-agar centre. Operating instructions: 1. Unscrew the cap containing the agar-agar slide. Hold the bottle in the other hand and lightly apply pressure to the sampling area using the agar-agar slide; or 2. Apply directly to the middle of the swab brush if you have completed a swab sample; or 3. Immerse the agar-agar slide in the liquid to analyse. 4. Insert the slide into the bottle and screw back on. Place in the oven at 37 °C for 24/48 hours. To detect yeasts, increase the incubation by 24/48 hours at 25/30 °C.

Supplier: VWR Chemicals

For various microbiological uses.

Supplier: VWR Chemicals

Modified tryptone soya broth with novobiocin

Supplier: VWR Chemicals

For various microbiological applications.

Supplier: VWR Chemicals

2XYT medium broth powder is used to prepare rich broth for the propagation of M13 bacteriophage.

Supplier: THERMO FISHER DIAGNOSTICS

MWLn agar, 500 g, Application: Universal media, Selective for: -, Standards: -

Supplier: VWR Chemicals

Lysogeny broth (LB) is a nutritionally rich medium used for the propagation and maintenance of E. coli. It is also widely used for the preparation of plasmid DNA and recombinant proteins.

Supplier: Thermo Fisher Scientific

YP Base Medium

Supplier: VWR Chemicals

A complete medium for the propagation and maintenance of yeast. The composition of YPD is (w/v) 1% yeast extract, 2% peptone, and 2% D-glucose.

Supplier: MP Biomedicals

This dehydrated medium is used for molecular biology applications.

Supplier: Apollo Scientific

A dried yeast autolysate with a high content of amino nitrogen and water soluble B-complex vitamins.

Supplier: MP Biomedicals

Rich medium for the growth of E. coli and certified for plasmid and other bacterial cultures in liquid medium.

Supplier: DOEHLER GROUP

Powder for the production of vegan AVM® broth to determine the microbiological load as part of a filling line validation under standardised conditions. AVM® is the Döhler trademark for Linden Grain Medium.

Supplier: DOEHLER GROUP

Agar for isolation yeast and moulds.

Supplier: VWR Chemicals

Available as 90 mm plates acc. to standards. TLHTh (Tween®, lecithin, histidine, thiosulphate) are used as disinfectant neutralisers. Bags are available double- or triple-wrapped. One pack per bag displays the irradiation indicator.

Supplier: MP Biomedicals

Tryptic Soy Agar is used for the isolation and cultivation of fastidious and non-fastidious micro-organisms. It supports the abundant growth of fastidious organisms such as Pneumococci, Streptococci, Neisserias, etc. Since it lacks carbohydrates, it is very useful in the study of hemolytic reactions and also in the preparation of chocolate agar.

Supplier: 3M Food Safety

3M™ Petrifilm™ Rapid coliform count plates are designed to provide fast, accurate results in detecting coliform contamination.

Supplier: LIOFILCHEM

Buffered NaCl Peptone Solution pH 7.0 is used for dissolving, suspending and diluting test samples.

Supplier: LIOFILCHEM

Mueller Hinton fastidious agar (Horse blood 5% + 20 mg/L β-NAD) is recommended by EUCAST for antimicrobial susceptibility testing of Streptococcus spp (including S. pneumoniae), Haemophilus spp and several other fastidious organisms.

Supplier: DOEHLER GROUP

Siebel-Instituts agar medium for the selective detection and quantitative determination of Saccharomyces wild yeast populations in samples from the brewing process.

Supplier: 3M Food Safety

3M™ Petrifilm™ Coliform count plates are sample-ready to identify coliform levels in - raw materials -in-process/finished food products - plant environment/equipment.

Supplier: Thermo Fisher Scientific

Yeast nitrogen base without amino acids and ammonium sulfate is used for classifying yeasts based on carbohydrate and amino acids requirements. Recommended for use in classifying yeasts based on carbon and nitrogen requirements. Contains all essential nutrients required for the growth of yeasts except amino acids, nitrogen and carbohydrate. Addition of nitrogen and carbon sources is required.

Supplier: VWR Chemicals

Validation of aseptic processing should include a simulation test using a nutrient medium, known as the media fill or media simulation test. The selection of the nutrient medium should be made based on the quantity of the product produced, and the selectivity, clarity, concentration and suitability for sterilisation. The process simulation test should imitate, as closely as possible, the routine aseptic manufacturing process, and include all the critical subsequent manufacturing steps. Normally process simulation tests should be repeated twice a year per shift and process. The number of containers used for media fills should be sufficient to enable a valid evaluation. For small batches, the number of containers for media fills should at least equal the size of the product batch.

Supplier: Cytiva (Formerly Pall Lab)

A wide variety of sterile ampoule media for common microbiological analyses, in clear glass or plastic ampoules. Supplied pre-measured for maximum efficiency and convenience. For public wastewater and drinking water: MF-Endo and M-FC (with and without rosolic acid for helping to increase the specificity of the medium for faecal coliforms) media are used when analysing water samples for total coliforms, faecal coliforms and E. coli. For food and beverage: M-TGE, HPC, M-Green YM, and orange serum broths are used in the food and beverage industry to QC final products (and fluids used in the manufacture of these products) to detect potential spoilage organisms. Trypticase soy broth, M-TGE, and HPC may be used to test final products and process waters for total bacteria in the pharmaceutical and microelectronics industries. Pseudomonas and KF-Streptococcal broths are highly selective media for organisms in these genera, and are used to monitor samples wherever contamination by these organisms must be prevented.

Supplier: Thermo Fisher Scientific

Terrific Broth

Supplier: THERMO FISHER DIAGNOSTICS

Culture media, ready to use, in plates

Supplier: DOEHLER GROUP

Ready-to-prepare dehydrated media for the detection and enumeration of diastatic wild yeast population in brewing culture yeast and beer samples.

Supplier: MP Biomedicals

Rich medium for the growth of E. coli and certified for plasmid and other bacterial cultures in liquid medium.