You searched for: Lubricants

Supplier: Borer Chemie

Silicone-free laboratory grease for sealing and lubricating fixed and rotary ground glass joints and for greasing fittings made of plastics and metall. Withstands vacuum conditions.

Supplier: GLASS PRECISION ENGINEERING

Nuboid Waxes are high temperature lubricants for glass manufacturers and glassblowers.

Supplier: EDWARDS HIGH VACUUM METTLER

Fomblin® perfluoropolyether oil for use in oil sealed rotary vacuum pumps and are practically a direct replacement for mineral oil in terms of viscosity and vapour pressure. Also it contains Drynert fluid which contains anti-rust and anti-wear additives soluble in Fomblin®. These additives cover metallic surfaces with a protective, corrosion resistant film.

Supplier: EDWARDS HIGH VACUUM METTLER

Gas Ballast Oil Return Kit:
Returns oil continuously to the gas ballast of the pump. The kit mechanism allows 80% fresh air to mix with 20% of returning oil, giving a gas ballast effect equivalent to gas ballast 2.

Supplier: EDWARDS HIGH VACUUM METTLER

ULTRAgrade® 15 and 19 oils result from a new process. Most manufacturers use a solvent refining process, whereas these oils are produced by a unique hydrotreating process. This process eliminates nitrogen, sulphur and oxygen and the aromatic hydrocarbons, leaving a clear base stock essentially free of impurities.

Supplier: GREEFF RW SILICONES LUBRICAN

Air-curing dry film lubricant in solvent.

Supplier: GREEFF RW SILICONES LUBRICAN

Molykote 111 is a valve lubricant and sealant with good resistance to most chemicals and a wide service temperature range.

Supplier: MARKET SOURCE PART PROCESS

SJ-27F oil is used in all lubricated JUN-Air compressors which helps prevent corrosion, assist in cooling and extends valve life. It has to be changed every two years. Used on M3, M4, M6, M12, M18, M24 and M36 models.