Supplier: HAMILTON BONADUZ

Gas tight syringes made of borosilicate glass or PTFE with Luer tip termination.

Supplier: HAMILTON BONADUZ

The Digital Syringe™ is a calibrated device composed of a serialised syringe and a serialised digital electronic holder.

Supplier: HAMILTON BONADUZ

These C-line syringes feature a direct attachment design of the needle to the barrel which eliminates contact between the sample solvent and adhesive, reducing carryover and ghost peaks. The inert plunger tip polymer provides enhanced solvent compatibility and longer lifetime.

Supplier: HAMILTON BONADUZ

These gas tight syringes are designed for HPLC autosamplers.

Supplier: HAMILTON BONADUZ

These syringes are used for Valco™ VISF-1 injection valves.

Supplier: Thermo Fisher Scientific

GC Autosampler syringes for use with Agilent GC instruments.

Supplier: HAMILTON BONADUZ

Gastight® syringes for the PSD/2 syringe pump are available with a standard PTFE-tipped plunger and a long life ultra-high molecular weight polyethylene (UHMWPE) plunger tip. The stroke length of a PSD/2 syringe is 60 mm.

Supplier: HAMILTON BONADUZ

These headspace syringes feature a unique Glue-Free (GF) needle attachment in combination with a High Dynamic (HD) plunger. They are designed specifically for PAL COMBI–xt® headspace autosamplers. Conventional headspace syringe needles are attached to the syringe glass body using glue (cement). Common problems are detached needles or ghost peaks due to low chemical inertness of the cement to solvents or limited resistance to higher temperature. These problems are addressed with the Glue Free High Temperature (HDHT) headspace syringes.

Supplier: HAMILTON BONADUZ

Universal injection syringes for GC. Similar to the 700 series but with a reinforced, protected plunger.

Supplier: HAMILTON BONADUZ

The 1000 series is a mid volume Gastight® syringe. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision machined PTFE plunger tip which creates a leak-free seal. With the tight fit, the tip essentially wipes the interior of the syringe barrel free of sample. This feature is particularly useful with heterogeneous samples as it reduces the chance that a deposit will occur and cause the plunger to freeze.

Supplier: HAMILTON BONADUZ

These syringes allow the collection, storage, transport and analysis of liquid or gaseous samples without the danger of evaporative loss or environmental contamination.

Supplier: HAMILTON BONADUZ

Suitable for applications such as GC, TLC and micro pipetting. Manufactured according to the principle of dead volume by positive pressure. A tungsten piston is introduced into the syringe as far as the tip of the needle. Needle and piston are calibrated against each other and must be changed at the same time in the event of replacement.

Supplier: Thermo Fisher Scientific

Syringe, chromatography, GC, Luer tip, gas tight, Volume: 1000 µl, Pk: 1

Supplier: HAMILTON BONADUZ

Adjustable multi-channel gel loading syringes simplify and speed sample loading of 96 lane gels. The adjustable gel loading syringe (AGLS) allows quick, easy transfer and loading of DNA samples. Eight samples at a time can be transferred directly from a microwell plate with 9 mm spacing to a 96-lane gel with 10,8 mm spacing.

Supplier: HAMILTON BONADUZ

Syringes are designed and tested to meet critical autosampler performance needs.

Supplier: HAMILTON BONADUZ

These syringes are the Gastight® version of the original 700 series syringes and are ideal for dispensing volumes from 1 µl up to 500 µl.

Supplier: HAMILTON BONADUZ

This adjustable Hamilton syringe delivers samples of identical volumes time after time, regardless of the pressure exerted on the piston by the operator. The micrometer control enables sample volumes to be chosen in increments as small as 0,05 µl. The locking bar serves to ensure that the sample volume always remains constant.

Supplier: HAMILTON BONADUZ

Multi-channel gel loading syringes are designed for multiplex DNA sequencing methodologies. They can rapidly transfer 1, 8, or 12 samples to sequencing gels, 96-well plates, or nylon membranes.

Supplier: HAMILTON BONADUZ

Microliter™ and gas/liquid tight syringes with reinforced plunger, ranging from 10 to 250 µl.

Supplier: HAMILTON BONADUZ

Syringes for the PSD/4 syringe pump are available with a standard PTFE tipped plunger and with a long life UHMWPE (Ultra High Molecular Weight Poly Ethylene) plunger tip. The stroke length of a PSD/4 syringe is 30 mm.

Supplier: HAMILTON BONADUZ

S-Line syringes are the cost-effective choice for CTC PAL autosampler applications. The Gastight® syringes have a precision-machined PTFE plunger tip which creates a leak-free seal that is an ideal choice for HPLC sample injections. Microliter syringes incorporate a hand-fitted stainless steel plunger with a finely bored syringe barrel.

Supplier: HAMILTON BONADUZ

Microsyringe pipettes with a special ³/₄" electrotapered needle for easy attachment of PTFE tips. The sample only wets the disposable PTFE tips, eliminating sample cross-contamination.

Supplier: HAMILTON BONADUZ

These GC syringes are suitable for Bruker Varian Chrompack autosamplers.

Supplier: Thermo Fisher Scientific

Syringe, chromatography, GC, Removable needle, gas tight, LVOC, Volume: 250 µl, Type of tip: Cone, Gauge: 26, Length: 80 mm, For: TriPlus, AS2000, Pk: 1

Supplier: HAMILTON BONADUZ

The 700 series syringe is the original hand-fitted Hamilton syringe. This series of syringes is ideal for dispensing volumes from 0,5 to 500 µl. The stainless steel plunger is manufactured to fit the glass barrel with a tolerance smaller than 100 millionths of an inch, resulting in unsurpassed syringe life. Each syringe is manufactured to achieve the highest level of accuracy and precision possible.

Supplier: KNAUER

This syringe has a glass barrel, stainless steel piston with PTFE seal, including needle with spring stopper.

Supplier: Agilent

Syringe, chromatography, Autosampler syringe, 6,7 mm barrel OD, Fixed needle, Volume: 10 µl, Type of tip: 3, Gauge: 22s, Length: 51 mm, For: CTC HTS, HTC PAL, Pk: 1

Supplier: Agilent

Syringe, chromatography, Disposable syringes, Volume: 5 ml, Pk: 100

Supplier: Agilent

These syringes are designed to withstand temperatures upto 150 °C.

Supplier: Agilent

Syringe, chromatography, HPLC/GC, Volume: 5000 µl, Type of tip: Luer lock, Pk: 1