You searched for: Chromatography Supplies

Supplier: VARIAN

Graphite tubes are quality tested to ensure each batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance and lifetime.

Supplier: Agilent

These torch injectors for PerkinElmer ICP-MS are available in a wide range of types.

Supplier: Agilent

These hyperskimmer cones are equivalent to those from PerkinElmer ICP-MS for complete confidence.

Supplier: Agilent

Rotor seal, vespel, pH 0 - 10, For: LC/MS

Supplier: Agilent

MP-AES Torches for the 4100/4200 Microwave Plasma-Atomic Emission Spectrometer.

Supplier: VARIAN

The sample loops is used for valco C2 peak valve.

Supplier: VARIAN

The Merlin Microseal is available in standard and high pressure kits.

Supplier: Agilent

These alignment interfaces are an integral part of the Agilent diode-array detection system.

Supplier: Agilent

Preventive maintenance kit for 1220 automated injector systems

Supplier: Agilent

High quality off-axis design ion lenses separate ions from photons and residual neutral material resulting in lower background noise in 7700/8800 ICP-MS systems.

Supplier: Agilent

These coils are equivalent to PerkinElmer ICP-OES coils for complete confidence.

Supplier: Agilent

Clamp kit (includes needle clamp and 2×clamp screw)

Supplier: Agilent

A vacuum degasser is recommended for maximum sensitivity in the low UV wavelength range; high injection precision; high retention time reproducibility; and flow rates below 0,5 ml/min.

Supplier: Agilent

These performance maintenance kits for Dionex HPLC systems contain all the normal wear parts, tools for disassembly/reassembly, and instructions necessary to keep your systems operating at peak performance.

Supplier: Agilent

All the parts required to connect solvent bottles to your HPLC instrument.

Supplier: Agilent

The kit contains needles, ferrule and a needle holder.

Supplier: Agilent

The Quick-Connect torch module for PerkinElmer ICP-OES includes the torch, mounting block, 2 mm alumina injector, Scott spray chamber, and Cross-Flow nebuliser.

Supplier: VARIAN

Load and Lock 4003 column, spare parts kit

Supplier: VARIAN

SPME fibers are available in a range of chemistries, formats, and for use with autosamplers or manual injections.

Supplier: Agilent

Rotor seal, PEEK, for 7010/7000/7040 series

Supplier: VARIAN

RheBuild® kits containing genuine Rheodyne® parts are available for most Rheodyne® products. RheBuild® kits eliminate the need to order individual parts.

Supplier: Agilent

The ISIS 3 dramatically increases the productivity of both the Agilent 7800 ICP-MS and the Agilent 7900 ICP-MS while also allowing high matrix samples to be run for extended periods of time.

Supplier: Agilent

These ion lenses are equivalent to the PerkinElmer ICP-MS versions for complete confidence.

Supplier: Agilent

These coils are equivalent to PerkinElmer ICP-MS coils for complete confidence.

Supplier: Agilent

Filters for PerkinElmer ICP-OES systems.

Supplier: Agilent

The HSDC is comprised of a fused silica cell body and removable capillaries. The light path through the cell is made from black fused silica which significantly minimizes stray light and defines the aperture for the diode-array spectrometer.

Supplier: Agilent

Features and specifications for the Intuvo Guard Chips.

Supplier: Agilent

These PEEK sample loops are inert to most organic solvents. The stainless-steel sample loops are not interchangeable due to the change in port angle.

Supplier: VARIAN

Solid phase microextraction (SPME) is a technique for extracting analytes from solid, liquid or gaseous samples by adsorbing them onto the SPME fiber and then desorbing them into an inlet, either on a gas chromatograph (GC) or an HPLC system. SPME is amenable to automation using an autosampler or it can be performed manually as well.

Supplier: VARIAN

The sample loop is used for valco C2 valve.