Supplier: S.C.A.T.

We have put the most popular combinations together in our SCAT SafetyWasteSet V2.0.

Supplier: S.C.A.T.

S.C.A.T. 'MARCO' V2.0 safety funnels can be closed safely and prevent danger of ignition.

Supplier: Bohlender

b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. Solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: S.C.A.T.

The SCAT SafetyCaps provide maximum safety for your HPLC solvent supply. Extract your solvents safely from bottles and reservoirs without being exposed to hazardous gases and solvent vapours. Complete with integrated air valve for pressure equalisation.

Supplier: Brand

PP caps, PE seal, DE-M marking.

Supplier: RIXIUS

Tamper-evident closure HDPE RD 61

Supplier: Thermo Orion

These membrane caps help to reduce probe servicing time and eliminate assembly problems. Convenient screw-on membrane caps help ensure optimal probe performance.

Supplier: BURKLE

Screw-on closure with tamper-evident ring for compact jerrycan.

Supplier: Corning

Transfer cap for optimum growth with with ¹/₄" Barb connection.

Supplier: Corning

Transfer caps with two ports. One port ends in a 50 mm, 0,2 μm filter disc and the other port is C-Flex Tubing ending in either a male Luer lock or a male polycarbonate quick connect.

Supplier: RIXIUS

Screw lids made of white coloured plastic PP.

Supplier: Agilent

InfinityLab Stay Safe caps stop evaporation of harmful solvent vapors from solvent bottles.

Supplier: Agilent

These safety caps have been designed for optimal sealing with an integrated exhaust valve providing pressurisation during solvent extraction and allowing proper solvent flow to your HPLC system.

Supplier: VICI JOUR RESEARCH

These waste caps include three or four ports for ¹/₈ and ¹/₁₆" tubing. Two versions of each waste cap are available, with an extra port to accommodate either a 1/2-20 port for ¹/₄" O.Ø tubing, or a barbed hose adapter.

Supplier: VICI JOUR RESEARCH

These caps top bottles are available with two, three, or four colour-coded 1/4-28 thread for ¹/₈ or ¹/₁₆" O.Ø tubing.

Supplier: VICI JOUR RESEARCH

GL 45 safety caps seal to the bottle with an O-ring (EPDM) which is resistant to commonly used HPLC solvents. If improved chemical resistance is required (e.g. for halogenated hydrocarbons), order an FEP-coated O-ring separately.

Supplier: hünersdorff GmbH

Made of fracture-proof and food-safe polyethylene with sleeve connection for a hose.

Supplier: VICI JOUR RESEARCH

This cap can be used for helium sparging and for delivering HPLC mobile phases. The tubing ports are made so that you push the tubing through the hole, while 1/4-28 fittings provide the best connection. Unused ports can be plugged as required.

Supplier: LABCONCO

Weathercaps are constructed of strong, corrosion-resistant PVC.

Supplier: VICI JOUR RESEARCH

DIN50 safety caps seal to the bottle/canister with an O-ring behind a PTFE lip, so the O-ring is therefore not a wetted part. Unused ports can be closed with the stopcock.

Supplier: VICI JOUR RESEARCH

The Eco Cap consists of a three-hole ETFE insert with a polyethylene collar.