These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
Large bore fittings, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
Upchurch Scientific®, XU-655, flangeless fittings includes nut, PEEK black and washer, ETFE natural, 1/2-20 flat bottom port, 250 psi, for 1/4" OD tubing
Expand 12 Items
Fittings, LuerTight™, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
LuerTight™ fittings are designed for connecting fluoropolymer tubing without barbs or nuts. By integrating ferrules into the Luer bodies, these fitting reliably hold tubing in place while giving the convenience of a Luer connection.
Expand 7 Items
Very high pressure PK fittings, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
Ultra high performance fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures.
Expand 6 Items
Fittings for 10-32 Ports and ¹/₆" stainless steel tubing, EXP®
Supplier: OPTIMIZE TECHNOLOGIES
The EXP® Fitting System is the premier adjustable nut and ferrule compression fitting for extreme high-pressure connections between ¹/₁₆" tubing and any 10 to 32 port.
Expand 1 Items
High pressure fittings, for ¹/₃₂" tubing, Nanovolume™
Supplier: VICI JOUR RESEARCH
These fittings are designed for capillary LC, used in HTS techniques, proteomics, genomics, and other newer developments in industrial research requiring small sample size for reduction of analysis time, fittings and unions are easy to handle.
Expand 7 Items
English threaded adapters, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
These adapters are made from PEEK or PCTFE.
Expand 5 Items
External national pipe thread adapters, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
These PEEK adapters make connections to female ¹/₈" and ¹/₄" National Pipe Thread (NPT) ports.
Expand 7 Items
One-piece hex-head fittings
Supplier: VICI JOUR RESEARCH
One-piece hex-head fittings made from PEEK are easy to use with the ValvTool and the Color-It Color-Coded Fingertight adapters. The 10-32 thread is suitable for standard high-pressure female connections. They are available both in a short and long version.
Expand 2 Items
Barbed adapters, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
PP, ETFE or PEEK. The barbed inserts of the swivel barb adapters spin freely from the threaded nut in order to prevent the tubing from twisting during installation.
Expand 14 Items
Bulkhead unions, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
Designed for plumbing tubing through equipment housing. Each union has unique ³/₈-24 external threads and comes complete with a stainless steel nut and lock washer to hold it in place.
Expand 11 Items
Two-way adaptors, PEEK™
Supplier: OMNIFIT
Omnifit® threaded adaptors are a useful range of problem solving parts that enable to convert thread sizes quickly and easily, accepting a ¹/₄"-28 UNF male fitting at one end and a range of male and female thread types at the other.
Expand 1 Items
Very high pressure (VHP) fittings, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
Reusable fittings made from stainless steel and proprietary PEEK polymer blend. Reusable up to 10 cycles without tubing damage or impact on pressure holding ability or carry-over (5 cycles if tightened to 1,6 N.m). Pressure rating up to 30 000 psi (2070 bar). Required torque 10 in-lbs (1,10 N-m)/14 in-lbs (1,6 N-m).
Expand 7 Items
Flangeless fingertight nuts
Supplier: VICI JOUR RESEARCH
PEEK flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.
Expand 2 Items
Quick connect Luer adapters, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
Upchurch Scientific® quick connect Luer adapters provide the opportunity to adapt either a female Luer or male Luer connection to a threaded connection. Conform to ISO requirements for medical Luer taper configuration and performance (45 psi/3,1 bar).
Expand 24 Items
MicroTight® adapters, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
These adapters are made from PEEK or stainless steel. They create a true zero dead volume (ZDV) connection between ¹/₁₆" ext. Ø tubing and capillary tubing.
Expand 6 Items
Connectors, Y-shaped, barbed
Supplier: UPCHURCH SCIENTIFIC
Specifically designed for Ismatec® pump tubings.
Expand 2 Items
Tubing connectors, X-shaped, PP
Supplier: SEMADENI
Tubing connectors, made of PP. Dimensions are shown as both nominal and exact as elasticity of tubing will influence the choice of size. Use our tubing selector 229-0111 to determine "grip". This will then give equivalent crest dimension for the particular connector concerned.
Expand 1 Items
Elbows, aluminum
Supplier: EDWARDS HIGH VACUUM METTLER
Elbows 90°, DN 16 mm, Aluminium
Expand 3 Items
Low pressure adapters
Supplier: VICI JOUR RESEARCH
Low pressure adapter, PP, plug 1/4” -28 male, PP
Expand 21 Items
Ferrule for Tubing
Supplier: Mettler - Toledo
Ferrule for tubing and sensors, ETFE, For tubing ext.Ø: 1,6 mm
Expand 1 Items
Reducing pieces for NW flanges
Supplier: EDWARDS HIGH VACUUM METTLER
Reducing pieces made of aluminium.
Expand 2 Items
Flanged fittings, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
Upchurch Scientific®, P-482T-01, flanged nut, ETFE natural, for 1/16" OD tubing, ETFE
Expand 7 Items
Adapter for safety exhaust filters
Supplier: VICI JOUR RESEARCH
Adapter, connects safety exhaust filter to SCAT® waste caps and A.I.T. smart waste caps
Expand 1 Items
Hose nozzles, aluminium
Supplier: EDWARDS HIGH VACUUM METTLER
Hose nozzle NW25 (DN25), Aluminium
Expand 1 Items
Fingertight adapters, Color-It
Supplier: VICI JOUR RESEARCH
These fingertight PP adapters are used with ¹/₄" PEEK and stainless hex-head nuts, converting them into colour coded fingertight fittings.
Expand 7 Items
Plugs and caps
Supplier: VICI JOUR RESEARCH
These plugs and caps are used for plugging ports and capping solvent lines.
Expand 7 Items
High pressure tees and crosses, PEEK
Supplier: VICI JOUR RESEARCH
PEEK tees and crosses, high pressure, for easy connection of solvent lines.
Expand 12 Items
High pressure micro capillary tees and crosses, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
PEEK.
Expand 10 Items
: Integra
: EPPENDORF
: Integra
: OZ BIOSCIENCES
: VWR Collection
: SenseAnywhere
: NANOENTEK
: VWR Collection
: Integra
: Sartorius
: Quantabio