You searched for: Disposable Garments

Supplier: DuPont

This hood is made of Tyvek®, a flash spun high density polyethylene. The fabric is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size) and is ultra-low linting.

Supplier: DuPont

Tyvek® IsoClean® sleeve model IC501B. Not clean-processed and not sterilised.

Supplier: Nitritex

Disposable shoe covers made from BioClean Dual™, a low linting spunbonded non-woven polypropylene fabric with embossed cast polyethylene sole for a secure footing.

Supplier: DuPont

DuPont™ Tyvek® IsoClean® slip-retardant shoe cover model IC451S.

Supplier: Portwest

This disposable lightweight overall are made from a breathable non woven PP fabric, enabling the user to keep cool while wearing the garment.

Supplier: Ansell

These overalls are made from a flame retardant material designed to be worn over woven thermal protective garments such as NOMEX® or PYROVATEX®, offering protection from particulates and pressurised liquid spray without compromising worker protection in the event of a flash fire.

Supplier: Ansell

The critical areas to the front of the garment (including the hood, arms and legs) are made from the MICROGARD® 2000 STANDARD fabric (PE laminate with non woven inner layer), offering a high level of liquid and particle protection with a low level of water vapour resistance. The back panel is made from breathable MICROGARD® 1500 PLUS fabric (SMS) which is air and water vapour permeable.

Supplier: Ansell

Breathable, anti-static SMS material.

Supplier: Ansell

Durable, comfortable multi-layer chemical barrier, offering Type 3/4/5 protection.

Supplier: Medicom

These disposable bouffant caps made of PP are ideal for use in hygiene and food industries.

Supplier: Ansell

Highly visible rear entry suit, with neoprene rubber face seal for a close fit to full face respirators. Ideal for use in extremly hazardous areas where protection against concentrated chemicals and biological agents is required.

Supplier: DuPont

These boot covers are made of Tyvek® flashspun PE. They are ideal for controlled environments where sterility and cleanliness are critical.

Supplier: Portwest

Made from 100% cotton fabric for added comfort and breathability cotton bib apron.

Supplier: Ansell

MICROGARD® 2000 is designed to allow water vapour (perspiration) to escape from the suit yet will withstand saturation of liquid chemicals and filter 100% of particulates down to 0,01 microns in size. The use of a high quality two-way stretch microporous film provides an effective liquid and particle barrier combined with a high water vapour transmission rate from inside to outside.

Supplier: KIMBERLY CLARK

Kimtech™ A5 sterile cleanroom apparel with CLEAN-DON™ technology is made of SMS (Spunbond Melt-blown Spunbond) material. It features built-in snaps that gather up legs and arms to aid aseptic gowning. Garments have a thumb loop that prevents the sleeve from rolling back and exposing arm or wrist when in use.

Supplier: Ansell

Lightweight, breathable microporous laminate technology, offering Type 5/6 protection.

Supplier: Ansell

Encapsulated chemical protective suits for use with air-fed/supplied systems.

Supplier: Ansell

Breathable, anti-static SMS material offering Type 5/6 protection.

Supplier: KIMBERLY CLARK

These comfortable shoe covers are manufactured of white Spunbound PP with Unitrax™ PE film, making them ideal for use in clean manufacturing.

Supplier: Portwest

Designed to give maximum protection and comfort to the wearer, the Bizweld cape hood provides safety in dangerous work environments.

Supplier: Ansell

These boot covers are made from a multi-layer barrier fabric (external film barrier, non woven inner layer, core high barrier film) that is renowned for its lightweight, yet robust textile feel and exceptional barrier to organic & inorganic chemicals.

Supplier: 3M

These disposable shoe covers made from now woven PP are designed to provide basic barrier protection to help protect footwear against light liquid splashes and hazardous dusts.

Supplier: Ansell

These over boots are made of microporous PP film with a non woven inner layer. The fabric provides an excellent barrier to chemical spray and infective agents.

Supplier: Ansell

These overalls are manufactured from one of the lightest and most comfortable chemical protective materials on the market. This durable multi-layer fabric (two non woven layers, one external film barrier layer) provides an extremely effective barrier against both inorganic chemicals and biological hazards.

Supplier: Ansell

Medium-duty chemical barrier, Type 5/6 protection.

Supplier: Medicom

This disposable beard cover made of white PP covers the lower part of the face. It is HACCP approved and therefore ideal for use in food applications, such as catering and food processing. Also suitable for chemical, pharmaceutical and maintenance applications.

Supplier: KIMBERLY CLARK

These anti-static lab coats are constructed of multiple layers, with a chemical and abrasion resistant spunbond 100% PP outer layer, and microfibre, cloth-like inner layer designed to filter out a variety of water-based liquids and dry particulates.

Supplier: 3M

These boot covers are made of combined SMS laminate and provide protection agaoinst non hazardous liquids and dust.

Supplier: Ansell

These overalls are made from a durable microporous PP laminate with a non woven inner layer. The fabric provides an excellent barrier to chemical spray and infective agents.

Supplier: Ansell

This lab coat is made from a non woven inner layer with a microporous PE film. Ideal for a wide range of industrial applications.